The cable connection is correct, but the speakers do not play any sound.
Speakers Do Not Play Sound
Created: Feb 15, 2016 05:29:55Latest reply: Feb 15, 2016 20:25:03
1195
1
0
0
0
- x
- convention：
- Emotion(0)
|
Step 1 Verify that the dual in-line package (DIP) switches above Room on the speaker hosts are all at the upper positions, as shown in Figure 3-1.
Figure 3-1 Correct settings of the speaker hosts' DIP switches  Step 2 Log in to the telepresence host web interface. On the displayed page, right-click Audio Ports and choose Diagnose from the shortcut menu. Click the Automatic Test Tone tab and click Start, as shown in Figure 3-2. If you hear the test tone (tick and clank sounds), the speaker hosts' settings and cabling are correct. Figure 3-2 Automatic Test Tone tab NOTE: To turn off the test tone, click Stop. |
|
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
