source user-interface

Latest reply: Nov 24, 2018 02:13:08 231 2 0 0

display source user-interface

Function

The display source user-interface command displays registration information of commands with the UTaskName registration type.

Format

display source user-interface

Parameters

None

Views

Diagnostic view

Default Level

3: Management level

Usage Guidelines

When a module fails to process commands, you can run the display source user-interface command to check whether the module is registered.

Example

# Displays registration information of commands with the UTaskName registration type.

<HUAWEI> system-view
[HUAWEI] diagnose
[HUAWEI-diagnose] display source user-interface 
------------------------------------------------------------------------------- 
ModuleID     TaskID   UTaskName   QueueID    EventFlag    FunctionName          
------------------------------------------------------------------------------- 
0x70130000      129          RM        60 0x         4    <null>                
0x70140000      129          RM        60 0x         4    <null>                
0x70150000      129          RM        60 0x         4    <null>                
0x70170000      129          RM        60 0x         4    <null>                
0x701d0000      129          RM        60 0x         4    <null>                
0x70180000      129          RM        60 0x         4    <null>                
0x708a0000      129          RM        60 0x         4    <null>                
0x70290000      129          RM        60 0x         4    <null>                
0x701e0000      129          RM        60 0x         4    <null>                
0x701b0000      129          RM        60 0x         4    <null>                
0x70190000      129          RM        60 0x         4    <null>                
0x702d0000      129          RM        60 0x         4    <null>                
0x70120000      129          RM        60 0x         4    <null>                
0x70110000      129          RM        60 0x         4    <null>                
0x40060000        0         DNS         0 0x         0    VOS_AscToBin          
0x418a0000        0        GTSM         0 0x         0    VOS_AscToBin          
0x418f0000        0    EOAM-1AG         0 0x         0    VOS_AscToBin          
0x418e0000        0    EOAM-MGR         0 0x         0    VOS_AscToBin          
0x417a0000        0        RRPP         0 0x         0    VOS_AscToBin          
0x418d0000        0    EOAM-3AH         0 0x         0    VOS_AscToBin          
0x41900000        0  EOAM-Y1731         0 0x         0    VOS_AscToBin          
0x41d80000        0     ERRDOWN         0 0x         0    VOS_AscToBin          
0x411e0000        0         STP         0 0x         0    VOS_AscToBin          
0x41b30000      132        UTSK        90 0x         4    <null>                
0x40590000      147         NTP        92 0x         4    <null>                
0x41730000        0      UTNQAC         0 0x         0    VOS_AscToBin          
0x411c0000        0        L2IF         0 0x         0    VOS_AscToBin          
0x419e0000        0        LACP         0 0x         0    VOS_AscToBin          
0x41e50000        0        ERPS         0 0x         0    VOS_AscToBin          
0x41cc0000        0         SEP         0 0x         0    VOS_AscToBin          
0x41130000        0        HGMP         0 0x         0    VOS_AscToBin          
0x40b70000      134        TUNN        71 0x         4    <null>                
0x417d0000      134        TUNN        71 0x         4    <null>                
0x40340000        0        VRRP         0 0x         0    VOS_AscToBin  
Table 1-13  Description of the display source user-interface command output

Item

Description

ModuleID

Module ID.

TaskID

Task ID.

UTaskName

UTask name.

QueueID

Queue.

EventFlag

Event.

FunctionName

Function.

  • x
  • convention:

Mark.hu
Created Nov 23, 2018 03:03:57 Helpful(0) Helpful(0)

During configuration restoration, the undo cli enable-config command disables command operation rights to prevent command running from affecting configuration restoration. If configuration restoration fails, the system is in the locked state. You must run the cli enable-config command to enable command operation rights to locate the fault and restore system operating.
  • x
  • convention:

Skay
Created Nov 24, 2018 02:13:08 Helpful(0) Helpful(0)

good case .
When a module fails to process commands, you can run the display source user-interface command to check whether the module is registered.
  • x
  • convention:

Comment

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login