SOR Archive

Hello friend！

SOR files are used to store OTDR detection results. Each time the probe ends, the new file is saved unconditionally.

The directory for storing SOR files is /ofs2/hwx/otdr.

Changing the Storage Mode

You can run the "cfg-set-otdr-sor-save-mode" command to set the file storage mode. After each detection is complete, new files are saved unconditionally. Different storage modes determine whether to delete the previous detection result.

Full mode

Do not delete the files detected last time and save all SO files unconditionally.

Small number of patterns

If the priority of the SOR file generated during the last detection is Priority_Normal and the latest detection result does not trigger an alarm status change, delete the SOR file generated during the last detection. In other cases, delete the previous SOR file.

Hope this helps！