Some resource are residual... Problem

Hi, my dear!

To query the configuration information about remote ONT web page login when a remote web visit already exists, do as follows:

huawei(diagnose)%%display remote-http ont information{ <cr>|<K> }:

  Command:
          display remote-http ont information   
  ----------------------------------------------------------------------------- 
  F/S/P                 :0/1/2                                                  
  ONT-ID                :0
  URL                   :https://x.x.x.x:8024  x.x.x.x indicates OLT IP address
                        :https://[x:x:x:x:x:x:x:x]:8024
                         x:x:x:x:x:x:x:x indicates OLT IPV6 address
  Proxy Port            :8024                                                   
  Proxy Duration        :45 min                                                 
  Protocol              :https                                                  
  ONT VLAN              :1                                                      
  ONT IP                :192.168.150.1                                          
  ONT Web Service Port  :7017                                                   
  -----------------------------------------------------------------------------

After find the ONT use the following command to delete a remote acces to the ONT:

The undo remote-http ont command is used to delete a remote ONT web page login connection.

I hope it help!

Thank you very much for the answer.

I've tried it.
But it seems that no remote web connection is active.
And I still have the error message when I'm trying to enter a new remote.
Even after a few hours not sending any requests...