First check the status of snmpv1. If it is disabled, you need to enable it manually (the snmpv1 status of the SNS switch is disabled by default).
admin> snmpconfig --show snmpv1
SNMPv1 community and trap recipient configuration:
Community 1: Huawei12#$ (rw)
No trap recipient configured yet
Community 2: Huawei12#$ (rw)
No trap recipient configured yet
Community 3: Huawei12#$ (rw)
No trap recipient configured yet
Community 4: Huawei12#$ (ro)
No trap recipient configured yet
Community 5: Huawei12#$ (ro)
No trap recipient configured yet
Community 6: Huawei12#$ (ro)
No trap recipient configured yet
SNMPv1:Disabled
Enable snmpv1：
admin> snmpconfig --enable snmpv1
Committing configuration.....done.
Configure Community
admin> snmpconfig --set snmpv1
SNMP community and trap recipient configuration:
Community (rw): [Huawei12#$]
Trap Recipient's IP address : [0.0.0.0] 10.10.10.2
Trap recipient Severity level : (0..5) [0] 4
Trap recipient Port : (0..65535) [162] 162
Community (rw): [Huawei12#$]
Trap Recipient's IP address : [0.0.0.0]
Community (rw): [Huawei12#$]
Trap Recipient's IP address : [0.0.0.0]
Community (ro): [Huawei12#$]
Trap Recipient's IP address : [0.0.0.0]
Community (ro): [Huawei12#$]
Trap Recipient's IP address : [0.0.0.0]
Community (ro): [Huawei12#$]
Trap Recipient's IP address : [0.0.0.0]
Committing configuration.....done.
Test send trap:
admin> snmptraps --send
Number of traps sent : 26
