SMU02B Temp & Humidity sensor oid problem
Created: Apr 26, 2021 13:07:30Latest reply: Apr 26, 2021 13:16:50
416
2
0
0
0
HiCoins as reward：
2
(problem unresolved)
How i can get Temp&Humidity data from smu02b ?
i find in mib this :
-- 1.3.6.1.4.1.2011.6.164.1.8.2.2.1.4
+ hwEnvHumidity OBJECT-TYPE
+ SYNTAX Integer32 (0..100)
+ UNITS "%RH"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Environment humility. It is an environment parameter collected in real time. Value range: 0 to 100, unit: %RH, and the value is an integer (.0).
+ If the value is 255, it indicates that the humidity sensor is not configured."
+ ::= { hwEnvHumiSensorEntry 4 }+ -- 1.3.6.1.4.1.2011.6.164.1.8.2.1.1.4
+ hwEnvTemperature OBJECT-TYPE
+ SYNTAX Integer32 (-50..100)
+ UNITS "centigrades"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Environment temperature. It is an environment parameter collected in real time. Value range: -50 to +100, unit: centigrade (°„C), and the value is an integer (.0).
+ If the value is -1024, it indicates that the temperature sensor is not configured."
+ ::= { hwEnvTempSensorEntry 4 }but this oid not respond .... all other data get correct
in smu web i can see Temp&Humidity values ...
- x
- convention：
- Emotion(0)
Featured Answers
|
|
|
All Answers
|
|
|
|
|
|
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
