Hi @MahMush
When a problem occurs on a device, you can run the ping command to check whether the network connectivity is normal and the host is reachable.
Before starting a ping operation, you are required to set many parameters. You can easily start a ping operation by using the ping smart command. You are only required to input the source IP address, destination IP address, and VPN name. Other parameters are automatically arranged and combined by the ping module. Since this requires no manual operation, the complexity of usage is reduced.
For more information, you can refer to https://support.huawei.com/hedex/hdx.do?docid=EDOC1000144033&id=AEH12189_07_11359&lang=en
I hope it helps!