SmartLogger 3000 supported SFP modules

Damoni · Created Jan 4, 2021 07:59:23

hello friend, I use this, hope will help you.

little_fish · Created Jan 4, 2021 07:48:59

hi, we are working on it now. Thank you.

sohaib.ansar · Created Jan 4, 2021 07:58:31

Hello,

Below are the highlighted SFP's modules that can be used in smartlogger 3000.

Ports

Parameter	Specifications
Ethernet electrical port (WAN and LAN)	2 PCS; 10M/100M/1000M auto-negotiation
Ethernet optical port (SFP)	2 PCS; supports 100M/1000M SFP/eSFP optical modules
MBUS port	1 PCS; supports an AC input voltage of 800 V at most
RS485 (COM) port	3 PCS; supported baud rates: 1200 bit/s, 2400 bit/s, 4800 bit/s, 9600 bit/s, 19,200 bit/s, and 115,200 bit/s
USB port	USB2.0
Power output port	1 PCS; DC output: 12 V, 0.1 A
Digital input (DI) port	4 PCS; supports only the access from relay dry contacts
Digital output (DO) port	2 PCS; relay dry contact output ports, supporting NO or NC contacts; supports 12 V, 0.5 A signal voltage
Analog input (AI) port	4 PCS; AI1: supports 0–10 V voltage (passive); AI2–AI4: support 4–20 mA or 0–20 mA input current (passive)
4G antenna port (4G)	1 PCS; SMA-K (external screw inner hole) port, used with the antenna with the SMA-J (internal screw inner pin) port

https://support.huawei.com/enterprise/en/doc/EDOC1100108365/70ceb7c5/technical-specifications-of-the-smartlogger

Damoni · Created Jan 4, 2021 07:59:23

hello friend, I use this, hope will help you.