Got it

SmartAX MA5672 not able to reach web gui after factory reset

Created: Oct 15, 2018 19:45:47Latest reply: Nov 28, 2018 18:43:32 2588 5 2 0 0
  Rewarded HiCoins: 0 (problem resolved)
This post was last edited by alaa2003 at 2018-10-17 18:17. hi

i was able to loginto web gui for SmartAX MA5672(MOC) normal, but after i made factory settings from web ,then i can not able to reach webgui via 192.168.100.1i still obtain IP & ping router ip , then tried hard reset and after router automatic restarted , issue still not solved
  attached print screen of web gui before i made factory reset
How to solve that issue and reach web gui once again ?
https://image.prntscr.com/image/zmt1gFLxQcOvlAU4W6pJZQ.png

https://image.prntscr.com/image/uJRAOz6eQnmhK3rbX3x87A.png
Attachment: You need to log in to download or view. No account? Register
  • x
  • convention:

Featured Answers
xelamaster69
Created Oct 15, 2018 20:28:37

If factory reset through web do not work, try resetting at the back of the device, keep on hold reset button for 30 seconds. And check again, try to connect directly to the device. And check the LAN ports what IP is giving to your device. Check that. And if you have now access, check the configuration of your LAN ports.

http://support.huawei.com/hedex/hdx.do?docid=EDOC1000099754&lang=en&idPath=7919710|9856746|9858653|22892884|19961588
View more
  • x
  • convention:

All Answers
xelamaster69
xelamaster69 Created Oct 15, 2018 20:28:37

If factory reset through web do not work, try resetting at the back of the device, keep on hold reset button for 30 seconds. And check again, try to connect directly to the device. And check the LAN ports what IP is giving to your device. Check that. And if you have now access, check the configuration of your LAN ports.

http://support.huawei.com/hedex/hdx.do?docid=EDOC1000099754&lang=en&idPath=7919710|9856746|9858653|22892884|19961588
View more
  • x
  • convention:

alaa2003
alaa2003 Created Oct 17, 2018 20:36:26

This post was last edited by alaa2003 at 2018-10-18 19:38. problem not solved!, who set it solved !!!
i tried:
1- keep on hold reset button for 30 seconds
2- router automatic restarted
3- connected via lan & tried all 4 ports
4- my PC obtain automatic IP: 192.168.100.2 & ipv6 too
SmartAX MA5672 not able to reach web gui after factory reset-2779531-1

but still not reach web guiSmartAX MA5672 not able to reach web gui after factory reset-2779531-2

i still able to ping router IP: problem not solved yet !!
SmartAX MA5672 not able to reach web gui after factory reset-2779531-3

i made scan for opened ports and found only opened port 53 UDP/TCP SmartAX MA5672 not able to reach web gui after factory reset-2779531-4
where is 80 http port and 443 ?what is next step ?
View more

This article contains more resources

You need to log in to download or view. No account? Register

x
  • x
  • convention:

alaa2003
alaa2003 Created Oct 22, 2018 19:21:17


any idea ?
View more
  • x
  • convention:

alaa2003
alaa2003 Created Oct 31, 2018 21:20:03

This post was last edited by alaa2003 at 2018-11-28 18:00. can i use serial cable console to connect device via BBU socket port?SmartAX MA5672 not able to reach web gui after factory reset-2792559-1
answer: no , it use for backup battery  (edited on 28/11/2018)

View more
  • x
  • convention:

alaa2003
alaa2003 Created Nov 28, 2018 18:43:32

after more study and check i could know TTL pins of SMARTAX MA5672 on board

. i still could not determine RX yet

Huawei SmartAX MA5672 MOC TTL  ..

my target is : why i can not able to reach web-based configuration after hard reset, and i think might able to fix from consol by TTL cable

here is log from TTL:
WARNING: at kernel/softirq.c:165 local_bh_enable_ip+0x88/0xb4()
Modules linked in: nf_nat_rtsp_alg(O) nf_conntrack_rtsp_alg(O) nf_nat_pptp(O) nf _nat_proto_gre nf_conntrack_pptp(O) nf_conntrack_proto_gre nf_nat_sip(O) nf_conn track_sip(O) nf_nat_h323(O) nf_conntrack_h323(O) nf_nat_tftp(O) nf_conntrack_tft p(O) nf_nat_ftp(O) nf_conntrack_ftp(O) xt_nat acc(PO) l2tp_ppp(O) l2tp_core(O) b tv_adpt(PO) ethoam_adpt(PO) bbsp_l3_adpt(PO) l3sfwd_ipv6(O) wap_ipv6(PO) sit(O) tunnel4▒

HuaWei StartCode 2012.02-dirty (R16C00 Jan 09 2016 - 18:01:09)

NAND: ECC Match pagesize:2K, oobzie:64, ecctype:4bit
Nand(Hardware): 128 MiB
boot_type = 0x2
chip_type = 0x3
startcode select the uboot to load
the high RAM is :8080103c
startcode uboot boot count:466482687
use the main slave_param area from flash, the RAM data is not OK!!!
Use the UbootA to load first
Use the UbootA to load success


U-Boot 2010.03-dirty (R16C00 Jan 09 2016 - 17:59:58)

DRAM: 128 MB
Boot From NAND flash
Chip Type is SD5115T
NAND: Special Nand id table Version 1.23
Nand ID: 0x98 0xD1 0x90 0x15 0x76 0x14 0x01 0x00
ECC Match pagesize:2K, oobzie:64, ecctype:4bit
Nand(Hardware): Block:128KB Page:2KB Chip:128MB*1 OOB:64B ECC:4bit
128 MiB
Using default environment

In: serial
Out: serial
Err: serial
PHY power down !!!
[main.c__6274]::CRC:0x3d80a8b4, Magic1:0x5a5a5a5a, Magic2:0xa5a5a5a5, count:0, C ommitedArea:0x0, Active:0x0, RunFlag:0x0
Start from main system(0x0)!
CRC:0x3d80a8b4, Magic1:0x5a5a5a5a, Magic2:0xa5a5a5a5, count:1, CommitedArea:0x0, Active:0x0, RunFlag:0x0
0x000000020000-0x000008000000 : "mtd=1"
UBI: attaching mtd1 to ubi0
Main area (A) is OK!
CRC:0x93e83925, Magic1:0x5a5a5a5a, Magic2:0xa5a5a5a5, count:1, CommitedArea:0x0, Active:0x0, RunFlag:0x0
Bootcmd:ubi read 0x85c00000 kernelA 0x1b65d2; bootm 0x85c00054
BootArgs:noalign mem=114M console=ttyAMA1,115200 ubi.mtd=1 root=/dev/mtdblock11 rootfstype=squashfs mtdparts=hinand:0x20000(startcode),0x7fe0000(ubifs),-(reserv ed) pcie0_sel=x1 maxcpus=0 l2_cache=l2hi coherent_pool=4M user_debug=0x1f panic= 1 skb_priv=128 debug_ll=on
U-boot Start from NORMAL Mode!

## Booting kernel from Legacy Image at 85c00054 ...
Image Name: Linux-3.10.53-HULK2
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1795390 Bytes = 1.7 MB
Load Address: 80e08000
Entry Point: 80e08000
Memory Start: 80e00000
Loading Kernel Image ... OK
OK
kernel loaded at 0x80e08000, end = 0x80fbe53e

Starting kernel ...

Uart base = 0x1010F000
dtb addr = 0x8145CAE0
Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 3.10.53-HULK2 (ci@szxcicsslx14747) (gcc version 4.7.1 (SDK V100R00 5C00B503) ) #1 SMP Fri Sep 11 04:44:07 UTC 2015
CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Hisilicon A9, model: HISI-CA9
skbuff priv len is 128.
Memory policy: ECC disabled, Data cache writealloc
On node 0 totalpages: 29184
free_area_init_node: node 0, pgdat c04a2a80, node_mem_map c04d4000
Normal zone: 285 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 29184 pages, LIFO batch:7
[dts]:cpu type is 5115
PERCPU: Embedded 7 pages/cpu @c05f5000 s6464 r8192 d14016 u32768
pcpu-alloc: s6464 r8192 d14016 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 28899
Kernel command line: noalign mem=114M console=ttyAMA1,115200 ubi.mtd=1 root=/dev /mtdblock11 rootfstype=squashfs mtdparts=hinand:0x20000(startcode),0x7fe0000(ubi fs),-(reserved) pcie0_sel=x1 maxcpus=0 l2_cache=l2hi coherent_pool=4M user_debug =0x1f panic=1 skb_priv=128 debug_ll=on
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 114MB = 114MB total
Memory: 110380k/110380k available, 6356k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffe00000 - 0xfffe0000 (1920 kB)
vmalloc : 0xc7800000 - 0xff000000 ( 888 MB)
lowmem : 0xc0000000 - 0xc7200000 ( 114 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc0436ac8 (4283 kB)
.init : 0xc0437000 - 0xc0463940 ( 179 kB)
.data : 0xc0464000 - 0xc04a69e8 ( 267 kB)
.bss : 0xc04a69e8 - 0xc04ce4c8 ( 159 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:512
sched_clock: 32 bits at 100MHz, resolution 10ns, wraps every 42949ms
Calibrating delay loop... 1292.69 BogoMIPS (lpj=6463488)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0xc03159e0 - 0xc0315a14
Brought up 1 CPUs
SMP: Total of 1 processors activated (1292.69 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
NET: Registered protocol family 16
DMA: preallocated 4096 KiB pool for atomic coherent allocations
clean_l2_special_check ok
L2cache cache controller enabled
bio: create slab <bio-0> at 0
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource arm,sp804
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 12288 bytes)
UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
squashfs: version 4.0 (2009/01/31) Phillip Lougher
jffs2: version 2.2. © 2001-2006 Red Hat, Inc.
fuse init (API version 7.22)
msgmni has been set to 215
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
brd: module loaded
mtdoops: mtd device (mtddev=name/number) must be supplied
Spi id table Version 1.22
SD511x chip id:0x51152100
Special nand id table Version 1.33
Hisilicon Nand Flash Controller V301 Device Driver, Version 1.10
Nand ID: 0x98 0xD1 0x90 0x15 0x76 0x14 0x01 0x00
Nand(Hardware): Block:128KB Page:2KB Chip:128MB OOB:64B ECC:4bit
NAND device: Manufacturer ID: 0x98, Chip ID: 0xd1 (Toshiba TC58NVG0S3ETA00), 128 MiB, page size: 2048, OOB size: 64
NAND_ECC_NONE selected by board driver. This is not recommended!
3 cmdlinepart partitions found on MTD device hinand
Creating 3 MTD partitions on "hinand":
0x000000000000-0x000000020000 : "startcode"
0x000000020000-0x000008000000 : "ubifs"
0x000008000000-0x000008000000 : "reserved"
mtd: partition "reserved" is out of reach -- disabled
softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
TCP: cubic registered
NET: Registered protocol family 17
ThumbEE CPU extension supported.
mapp kbo****rram_address=0, ddrram_size=0 fail[WARNNING]:Kbo x device descriptor struct kbox_dev_des Intialization Failed
kbox: init ddrram fail ret=-99
kbox: load OK
UBI: attaching mtd1 to ubi0
UBI: scanning is finished
UBI: attached mtd1 (name "ubifs", size 127 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
UBI: good PEBs: 1023, bad PEBs: 0, corrupted PEBs: 0
UBI: user volume: 14, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 3/1, WL threshold: 512, image sequence number: 1425 100460
UBI: available PEBs: 295, total reserved PEBs: 728, PEBs reserved for bad PEB ha ndling: 20
UBI: background thread "ubi_bgt0d" started, PID 273
Warning: unable to open an initial console.
squashfs_cache_init: sqcachesize=8.
VFS: Mounted root (squashfs filesystem) readonly on device 31:11.
Freeing unused kernel memory: 176K (c0437000 - c0463000)
******** Total Boot time: 1362 ms, uncompress initrd cost 0 ms ********

[wdt] hi_brd_type: 0x4b
hi_wdt: User-Mode!
register_reset_notifier success
hi_wdt: Init sucessfull!
nf_conntrack version 0.5.0 (4000 buckets, 16000 max)
Netfilter messages via NETLINK v0.30.
arp_tables: (C) 2002 David S. Miller
ip_tables: (C) 2000-2006 Netfilter Core Team
hw_ssp_basic: module license 'Huawei Tech. Co., Ltd.' taints kernel.
Disabling lock debugging due to kernel taint
set log file to:/var/init_debug.txt
hw_dm_init successfully...
Soc himem config loaded[51152] /etc/wap/wap_ssp_basic.cfg
Lastword meminfo:0x80802000;0x000fe000;1;
current lastword info:Add=0xc7f01000;max_num=300;Add1=0xc7f01000;Add2=0xc7f06000 ;Add3=0xc7f0b000;
proc_dbg_log_get_last_logbuffer:reset buffer.
Set kmsgread process pid to:502;
UBIFS: background thread "ubifs_bgt0_13" started, PID 513
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 13, name "file_system"
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/20 48 bytes
UBIFS: FS size: 19681280 bytes (18 MiB, 155 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID 554A3BCE-3880-4711-B482-25B79 090A54F, small LPT model
reload log OK!
NET: Registered protocol family 10

SYSCTL module is installed

SPI module is installed

PIE module is installed

GPIO module is installed

I2C module is installed

TIMER23 module is installed

SERDES module is intalled

HW module is installed

UART module is installed

DMA module is installed

CHIP module is installed
set mac work mode ge...set port mode PMODE_SGMII...set port tx/rx enable...set m ac work mode ge...set port mode PMODE_SGMII...set port tx/rx enable...set mac wo rk mode ge...set port mode PMODE_SGMII...set port tx/rx enable...set mac work mo de ge...set port mode PMODE_SGMII...set port tx/rx enable...
hi_adp_cnt module is installed

BRIDGE module is installed

PON_LP module is installed

gpon_api module is installed

GPON module is installed

epon_api module is installed

EPON module is installed

L3 module is installed

L3 API module is installed!

OAM module is installed

SCI module is installed

MDIO module is installed
pcie0 sel: 0x1, pcie1 sel:0x0,pcie0 memsize:0xa00000, pcie1 memsize:0xa00000.
PCIE0 Device Link Down val = 0x00000018.
set_dma_ops done, total 0 devices.

------ SOC is 5115T PILOT ------
COMMON For LDSP Install Successfully...
GPIO For LDSP Install Successfully...
I2C For LDSP Install Successfully...
UART For LDSP Install Successfully...
OPTIC For LDSP Install Successfully...
KEY For LDSP Install Successfully...
LED For LDSP Install Successfully...
RF For LDSP Install Successfully...
SIM For LDSP Install Successfully...
<ldsp>board version is 75
<ldsp>pcb version is 1
<ldsp>orig board version is 75
DEV For LDSP Install Successfully...
BATTERY For LDSP Install Successfully...
[DM]:board_ver=75,pcb_ver=1
SoftVersion=[V800R316C10SPC200B050], ResVersion=[] Active=[0] Dir=[]
hw_dm_init_data successfully...
ac_typeword_key [] ,ac_tmp_typeword_key []
MPCP For LDSP Install Successfully...
No cpld chip, not to load cpld file

The board does not support POE function!
PLOAM For LDSP Install Successfully...
PHY For LDSP Install Successfully...
AMP Module Install Successfully...
GMAC Module Install Successfully...
EMAC Module Install Successfully...
WIFI For LDSP Install Successfully...
kbox: ddrram: verify fs magic fail. It's ok if first time using this device
kbox_exception_dump abort for NULL dump_path!
kbox:create region panic, size=65536
kbox:create region ks_main, size=102400
kbox:create region ks_0, size=4096
register fiq129 callback
addr0, 0xc5d0a000
addr1, 0xc5cf4000
addr2, 0xc5d2a000
addr3, 0xc5d2c000
fiq_stack init ok
fiq_glue_register_handler, okfiq source is 1!
fiq type is 0!
fiq clean source is 0!
fiq dead loop is 1!
[fiq_set_gic]set 129 irq to fiq, Priority is 0.
[request_fiq]fiq first register succeed!
kbox:create region deadlock, size=131072
HIGHWAY For LDSP Install Successfully...
SPI For LDSP Install Successfully...

hw_codec_init board type=75...
CODEC For LDSP Install Successfully...
le88601 For LDSP install successfully...
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
hiusb_start_hcd sucessful(5115)!
hiusb-ehci hiusb-ehci.0: HIUSB EHCI
hiusb-ehci hiusb-ehci.0: new USB bus registered, assigned bus number 1
hiusb-ehci hiusb-ehci.0: irq 71, io mem 0x10a40000
hiusb-ehci hiusb-ehci.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
hiusb-ohci hiusb-ohci.0: HIUSB OHCI
hiusb-ohci hiusb-ohci.0: new USB bus registered, assigned bus number 2
hiusb-ohci hiusb-ohci.0: irq 70, io mem 0x10a50000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usblp
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver pl2303
usbserial: USB Serial support registered for pl2303
usbcore: registered new interface driver cp210x
usbserial: USB Serial support registered for cp210x
usbcore: registered new interface driver ftdi_sio
usbserial: USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver option
usbserial: USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver huawei_ether
usbcore: registered new interface driver cdc_ether
USB For LDSP Install Successfully...
DATACARD For LDSP Install Successfully...
DATACARD CHIP For LDSP install successfully...
hw_ker_pdt_usb_init successfully...
Error: your device management does not support 5203 chip!
DCM init Successfully...
PPP generic driver version 2.4.2
NET: Registered protocol family 24
PTP For BBSP Install Successfully...
dhcp_module_init load success !
pppoe_module_init load success !
hw_socket_l2info_init load success !
hw_neigbour_init load success !
l2base For BBSP Install Successfully...
pdt QOS install successfully...
l2ext For BBSP Install Successfully...
vlanflt_module_init load success !
pppoe_cmd_module_init load success !
l3base for bbsp Install Successfully...
linux kernel dopra is installed!

dsp sdk insmod success!

hw_dsp_init regstate= 0...

hw_dsp_init ui_BoardVer=75,g_uc_external_5203_flag=0...
DSP For VOICE Install Successfully...
gre: GRE over IPv4 demultiplexor driver
ip_gre: GRE over IPv4 tunneling driver
arp_config_bridge_filter:
hw_arp_announce_module_init load success !
arp_module_init load success !
hw_route_ipv4_module_init in
Route ipv4 for bbsp Install Successfully...
Neighbour discovery for bbsp Install Successfully...
Portal For BBSP Install Successfully...
User device for bbsp Install Successfully...
hw_conntrack_dyn_rsv_ini v1.0!
ipfpm_pathdata_init Successfully...
l3ext for bbsp Install Successfully...
ipt_conenat_init success
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
hw_route_ipv6_module_init in
Route ipv6 for bbsp Install Successfully

[ker_L2M_CTP] for bbsp Install Successfully...
pdt l3 install successfully...

------y1731_ker_hook installed!-----
l2tp_core: L2TP core driver, V2.0
l2tp_ppp: PPPoL2TP kernel driver, V2.0
<LDSP> system has slave space for bob
SD511X test self OK
Optic test self NoCheck
WIFI test self NoCheck
PHY[1] test self OK
PHY[2] test self OK
PHY[3] test self OK
PHY[4] test self OK
PHY[5] test self NoCheck
ExtRF test self NoCheck
hw_drv_dev_ecc_reg
<LDSP> get uc_opt_hwauth_upport: 0
read data is over time

read data is over time

FILE = /usr1/code/MxU_R016C10_WAP_Git_Timer/code/current/MXU/CI/Make/../../Sourc e/ldsp/driver/optic/hw_ker_drv_optic_2099.c
LINE = 2328, FUNC = hw_drv_optic_2099_chip_id_get
<LDSP> reg init error
<LDSP> common optic,the last i2c error is normal,donot worry
hs_gmac_func_register ret=0x0!
GPON init success !
Initializing USB Mass Storage driver...
Error: Driver 'usb-storage' is already registered, aborting...
exist the same name region!
UBI error: ubi_open_volume: cannot open device 0, volume 13, error -16
ubi_open_volume error with 2, try UBI_READONLY;
read data is over time

read data is over time

read data is over time

read data is over time

warning: process `bbsp' used the deprecated sysctl system call with 3.12.16.-2.1 .0.
warning: process `bbsp' used the deprecated sysctl system call with 3.12.16.-2.5 .0.
warning: process `bbsp' used the deprecated sysctl system call with 3.12.16.-2.6 .0.

==gemport iso force 0
[0060] hi_l3_if_rule_check, faltal error: ip_version[0] nonsupport
[0839] hi_l3_if_destroy_511x, warning: if_id[805306369] not find

#####hw_drv_dsp_op_init >>>uiVirtualAddr = 0x0

hw_drv_dsp_alloc_zspMem uiPhyAddr =>>>0x83d00000 ulOrder=8

Alloc uiSize[1048576] uiLoop1[1]
hw_drv_dsp_op_init >>>uiVirtualAddr = 0xc8c60000

hw_drv_dsp_op_init >>>uiPhyAddr = 0x83d00000

OS-Functions are registered !CPU-TYPE=3
HIAPI_ZspBootCompleteWait: Boot Complete!

pots port total num: 4
hw_chip_adapter_codec_init beigin chip total 1

hw_chip_adapter_codec_init end 1
Slic init success...
------------[ cut here ]------------
WARNING: at kernel/irq/handle.c:146 handle_irq_event_percpu+0x214/0x224()
irq 80 handler hi_kernel_timer2_3_int_process+0x0/0xc0 [hi_timer] enabled interr upts
Modules linked in: l2tp_ppp(O) l2tp_core(O) btv_adpt(PO) ethoam_adpt(PO) bbsp_l3 _adpt(PO) l3sfwd_ipv6(O) wap_ipv6(PO) sit(O) tunnel4 ip6_tunnel(O) tunnel6 ip6t_ REJECT ip6table_mangle ip6table_filter ip6_tables ip6t_rt nf_conntrack_ipv6 nf_d efrag_ipv6(O) l3sfwd(PO) hw_module_conenat(O) l3ext(PO) napt(PO) ip_gre(O) gre i p_tunnel(O) hw_module_dsp(PO) hw_module_dsp_sdk(O) hw_module_dopra(PO) l3base(PO ) hw_module_trigger(PO) hw_ssp_gpl_ext(O) l2ext(PO) qos_adpt(PO) bbsp_l2_adpt(PO ) cpu(PO) acl(PO) l2base(PO) hw_ptp(PO) hw_bbsp_lswadp(PO) l2ffwd(PO) sfwd(PO) c ommondata(PO) pppoe(O) pppox(O) ppp_generic(O) slhc hw_module_autoload(PO) hw_mo dule_dcm(PO) hw_module_dcom(PO) hw_smp_dcom(PO) hw_amp(PO) smp_usb(PO) hw_module _datacard_chip(PO) hw_module_datacard(PO) hw_module_usb(PO) mmc_block(O) mmc_cor e(O) cdc_ether(O) usbnet(O) hw_cdc_driver(O) option(O) usb_wwan(O) usbhid(O) hid (O) input_core(O) ftdi_sio(O) cp210x(O) pl2303(O) usbserial(O) cdc_acm(O) usblp( O) usb_storage(O) xhci_hcd(O) ohci_hcd(O) ehci_pci(O) ehci_hcd(O) hiusb_sd511x(P O) usbcore(O) usb_common(O) sd_mod(O) scsi_mod vfat fat nls_cp936 nls_utf8 nls_c p437 nls_ascii hw_ker_codec_le88601(PO) hw_module_codec(PO) hw_module_spi(PO) hw _module_highway(PO) rtos_snapshot(O) hw_module_wifi(PO) hw_module_emac(PO) hw_mo dule_gmac(PO) hw_module_amp(PO) hw_module_phy(PO) hw_module_ploam(PO) hw_module_ poe(PO) hw_module_cpldload(PO) hw_module_mpcp(PO) hw_module_feature(PO) hw_dm_pd t(PO) hw_module_battery(PO) hw_module_dev(PO) hw_module_sim(PO) hw_module_rf(PO) hw_module_led(PO) hw_module_key(PO) hw_module_optic(PO) hw_module_uart(PO) hw_m odule_i2c(PO) hw_module_gpio(PO) hw_module_common(PO) hw_module_acp(O) hi_mdio(P O) hi_sci(PO) hi_oam(PO) hi_l3_5115(PO) hi_epon(PO) hi_gpon(PO) hi_ponlp(PO) hi_ bridge_5115(PO) hi_dma(PO) hi_uart(PO) hi_hw(PO) hi_serdes(PO) hi_timer(PO) hi_i 2c(PO) hi_gpio_5115(PO) hi_pie(O) hi_spi(PO) hi_sysctl(PO) ipv6 hw_ssp_extend(PO ) hw_ssp_depend(PO) hw_himem_soc_config(PO) hw_smp_dm(PO) hw_ssp_basic(PO) hw_ss p_gpl(O) xt_LOG(O) ipt_ah ipt_ECN ipt_REJECT ipt_ULOG iptable_nat nf_nat_ipv4 ip table_raw arpt_mangle iptable_mangle iptable_filter ip_tables arptable_filter ar p_tables xt_multiport xt_iprange xt_HL nfnetlink_queue nfnetlink_log nfnetlink n f_conntrack_ipv4(O) nf_defrag_ipv4(O) ipt_MASQUERADE nf_nat(O) xt_tcpmss xt_stat e xt_limit xt_connmark xt_mark nf_conntrack(O) rng_core hi_drv_wdt(O)
CPU: 0 PID: 994 Comm: voice_h248sip Tainted: P O 3.10.53-HULK2 #1
[<c0010e3c>] (unwind_backtrace+0x0/0xfc) from [<c000c890>] (show_stack+0x10/0x14 )
[<c000c890>] (show_stack+0x10/0x14) from [<c001ad9c>] (warn_slowpath_common+0x54 /0x6c)
[<c001ad9c>] (warn_slowpath_common+0x54/0x6c) from [<c001ae48>] (warn_slowpath_f mt+0x30/0x40)
[<c001ae48>] (warn_slowpath_fmt+0x30/0x40) from [<c006334c>] (handle_irq_event_p ercpu+0x214/0x224)
[<c006334c>] (handle_irq_event_percpu+0x214/0x224) from [<c00633b0>] (handle_irq _event+0x54/0x74)
[<c00633b0>] (handle_irq_event+0x54/0x74) from [<c00661d8>] (handle_fasteoi_irq+ 0x80/0x158)
[<c00661d8>] (handle_fasteoi_irq+0x80/0x158) from [<c0062a20>] (generic_handle_i rq+0x28/0x38)
[<c0062a20>] (generic_handle_irq+0x28/0x38) from [<c000a4f4>] (handle_IRQ+0x48/0 xd4)
[<c000a4f4>] (handle_IRQ+0x48/0xd4) from [<c0008554>] (gic_handle_irq+0x2c/0x60)
[<c0008554>] (gic_handle_irq+0x2c/0x60) from [<c0009a3c>] (__irq_usr+0x3c/0x60)
Exception stack(0xc48e9fb0 to 0xc48e9ff8)
9fa0: b6cc88d0 00000911 01b7b6f0 00000069
9fc0: 00000068 01b7b688 00000049 b6cc88d0 b6cc8904 00004000 b6cc88d0 b6cc88d0
9fe0: 00000001 beba4060 b6cc88d0 b6ca38a4 20000010 ffffffff
---[ end trace d66357b01d1137a2 ]---
[0174] hi_chip_port_get, fatal error: port(type:0x0 mask:0x0: not exist)
[0746] hi_queue_mode_set_511x, fatal error: chip_port get fault
[0174] hi_chip_port_get, fatal error: port(type:0x0 mask:0x0: not exist)
[0746] hi_queue_mode_set_511x, fatal error: chip_port get fault
[0360] hi_pdu_collision_check, faltal error: pdu_class[0] pdu[44](thick_A) coll ide with trans_act[0]
[0174] hi_chip_port_get, fatal error: port(type:0x0 mask:0x0: not exist)
[0746] hi_queue_mode_set_511x, fatal error: chip_port get fault

event: chip 0, channel 0, deviceNum 0

hw_chip_adapter_codec_linetest_handler chip 0 init complete!

hw_chip_adapter_codec_test_prepareLine

hw_chip_adapter_codec_test_prepareLine

hw_chip_adapter_codec_init beigin chip total 2

deviceNum = 1, status=0
hw_chip_adapter_codec_init end 2

event: chip 1, channel 0, deviceNum 1

hw_chip_adapter_codec_linetest_handler chip 1 init complete!

hw_chip_adapter_codec_test_prepareLine

hw_chip_adapter_codec_test_prepareLine

event: chip 0, channel 0, deviceNum 0

ucDevice[0],ucChannel[0]
VP_EVCAT_RESPONSE : eventId VP_EVID_CAL_CMP on deviceId 0 chanId 0

event: chip 0, channel 1, deviceNum 0

ucDevice[0],ucChannel[1]
VP_EVCAT_RESPONSE : eventId VP_EVID_CAL_CMP on deviceId 0 chanId 1
ct dyn resv:0

event: chip 1, channel 0, deviceNum 1

ucDevice[1],ucChannel[0]
VP_EVCAT_RESPONSE : eventId VP_EVID_CAL_CMP on deviceId 1 chanId 0

event: chip 1, channel 1, deviceNum 1

ucDevice[1],ucChannel[1]
VP_EVCAT_RESPONSE : eventId VP_EVID_CAL_CMP on deviceId 1 chanId 1

SLIC Calibration success
@@@@@@@ CODEC event report :Port 0 ,event = 0x20006412, current tick 126@@@@@@@

port [0] set to mode [0]
port [1] set to mode [0]
port [2] set to mode [0]
port [3] set to mode [0]
nf_alg_rtsp_nat_policy:0
[8173] hi_egress_car_resource_get_511x, info: car id 2
[8173] hi_egress_car_resource_get_511x, info: car id 3
[8173] hi_egress_car_resource_get_511x, info: car id 4
[8173] hi_egress_car_resource_get_511x, info: car id 5
[8173] hi_egress_car_resource_get_511x, info: car id 6
[8173] hi_egress_car_resource_get_511x, info: car id 7
[8173] hi_egress_car_resource_get_511x, info: car id 8
[8173] hi_egress_car_resource_get_511x, info: car id 9
[8173] hi_egress_car_resource_get_511x, info: car id 10
[PLOAM]ONUID(0): O1 => O1
Init Access Mode To GPON .................
start [datacard_thread]

The link of ETH0 is up, uni_phy
eth status changed: port 0, status 0

DeviceType = MSFT 5.0
IP: 40151232
devicetype: MSFT 5.0
------------[ cut here ]------------
WARNING: at kernel/softirq.c:165 local_bh_enable_ip+0x88/0xb4()
Modules linked in: nf_nat_rtsp_alg(O) nf_conntrack_rtsp_alg(O) nf_nat_pptp(O) nf _nat_proto_gre nf_conntrack_pptp(O) nf_conntrack_proto_gre nf_nat_sip(O) nf_conn track_sip(O) nf_nat_h323(O) nf_conntrack_h323(O) nf_nat_tftp(O) nf_conntrack_tft p(O) nf_nat_ftp(O) nf_conntrack_ftp(O) xt_nat acc(PO) l2tp_ppp(O) l2tp_core(O) b tv_adpt(PO) ethoam_adpt(PO) bbsp_l3_adpt(PO) l3sfwd_ipv6(O) wap_ipv▒

HuaWei StartCode 2012.02-dirty (R16C00 Jan 09 2016 - 18:01:09)

NAND: ECC Match pagesize:2K, oobzie:64, ecctype:4bit
Nand(Hardware): 128 MiB
boot_type = 0x2
chip_type = 0x3
startcode select the uboot to load
the high RAM is :8080103c
startcode uboot boot count:445511167
use the main slave_param area from flash, the RAM data is not OK!!!
Use the UbootA to load first
Use the UbootA to load success


U-Boot 2010.03-dirty (R16C00 Jan 09 2016 - 17:59:58)

DRAM: 128 MB
Boot From NAND flash
Chip Type is SD5115T
NAND: Special Nand id table Version 1.23
Nand ID: 0x98 0xD1 0x90 0x15 0x76 0x14 0x01 0x00
ECC Match pagesize:2K, oobzie:64, ecctype:4bit
Nand(Hardware): Block:128KB Page:2KB Chip:128MB*1 OOB:64B ECC:4bit
128 MiB
Using default environment

In: serial
Out: serial
Err: serial
PHY power down !!!
[main.c__6274]::CRC:0x3d80a8b4, Magic1:0x5a5a5a5a, Magic2:0xa5a5a5a5, count:0, C ommitedArea:0x0, Active:0x0, RunFlag:0x0
Start from main system(0x0)!
CRC:0x3d80a8b4, Magic1:0x5a5a5a5a, Magic2:0xa5a5a5a5, count:1, CommitedArea:0x0, Active:0x0, RunFlag:0x0
0x000000020000-0x000008000000 : "mtd=1"
UBI: attaching mtd1 to ubi0
Main area (A) is OK!
CRC:0x93e83925, Magic1:0x5a5a5a5a, Magic2:0xa5a5a5a5, count:1, CommitedArea:0x0, Active:0x0, RunFlag:0x0
Bootcmd:ubi read 0x85c00000 kernelA 0x1b65d2; bootm 0x85c00054
BootArgs:noalign mem=114M console=ttyAMA1,115200 ubi.mtd=1 root=/dev/mtdblock11 rootfstype=squashfs mtdparts=hinand:0x20000(startcode),0x7fe0000(ubifs),-(reserv ed) pcie0_sel=x1 maxcpus=0 l2_cache=l2hi coherent_pool=4M user_debug=0x1f panic= 1 skb_priv=128 debug_ll=on
U-boot Start from NORMAL Mode!

## Booting kernel from Legacy Image at 85c00054 ...
Image Name: Linux-3.10.53-HULK2
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1795390 Bytes = 1.7 MB
Load Address: 80e08000
Entry Point: 80e08000
Memory Start: 80e00000
Loading Kernel Image ... OK
OK
kernel loaded at 0x80e08000, end = 0x80fbe53e

Starting kernel ...

Uart base = 0x1010F000
dtb addr = 0x8145CAE0
Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 3.10.53-HULK2 (ci@szxcicsslx14747) (gcc version 4.7.1 (SDK V100R00 5C00B503) ) #1 SMP Fri Sep 11 04:44:07 UTC 2015
CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Hisilicon A9, model: HISI-CA9
skbuff priv len is 128.
Memory policy: ECC disabled, Data cache writealloc
On node 0 totalpages: 29184
free_area_init_node: node 0, pgdat c04a2a80, node_mem_map c04d4000
Normal zone: 285 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 29184 pages, LIFO batch:7
[dts]:cpu type is 5115
PERCPU: Embedded 7 pages/cpu @c05f5000 s6464 r8192 d14016 u32768
pcpu-alloc: s6464 r8192 d14016 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 28899
Kernel command line: noalign mem=114M console=ttyAMA1,115200 ubi.mtd=1 root=/dev /mtdblock11 rootfstype=squashfs mtdparts=hinand:0x20000(startcode),0x7fe0000(ubi fs),-(reserved) pcie0_sel=x1 maxcpus=0 l2_cache=l2hi coherent_pool=4M user_debug =0x1f panic=1 skb_priv=128 debug_ll=on
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 114MB = 114MB total
Memory: 110380k/110380k available, 6356k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffe00000 - 0xfffe0000 (1920 kB)
vmalloc : 0xc7800000 - 0xff000000 ( 888 MB)
lowmem : 0xc0000000 - 0xc7200000 ( 114 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc0436ac8 (4283 kB)
.init : 0xc0437000 - 0xc0463940 ( 179 kB)
.data : 0xc0464000 - 0xc04a69e8 ( 267 kB)
.bss : 0xc04a69e8 - 0xc04ce4c8 ( 159 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:512
sched_clock: 32 bits at 100MHz, resolution 10ns, wraps every 42949ms
Calibrating delay loop... 1292.69 BogoMIPS (lpj=6463488)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0xc03159e0 - 0xc0315a14
Brought up 1 CPUs
SMP: Total of 1 processors activated (1292.69 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
NET: Registered protocol family 16



View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.
Information Protection Guide
Thanks for using Huawei Enterprise Support Community! We will help you learn how we collect, use, store and share your personal information and the rights you have in accordance with Privacy Policy and User Agreement.