We are planning to setup a Smart broadband [Online Monitoring Support Portal] from where our CPEI [Customer Premises Equipment Installer] or field team can esaily troubleshoot and gives rapid response to our valuable customers. Now guide us how we do to collect data / measure following paraments [ CPE status, lline status, port status, Authentication status, IP Address, MAC address, packet loss, latency, bandwidth & etc] from respective devices mentioned in the below figure.
Does the CPE in the Problem Description refer to the ONT?
if it is an ONT device, you can run the display ont info command on the DSLAM to query the optical network terminal (ONT) information of the xPON board.
Does the CPE in the Problem Description refer to the ONT?
if it is an ONT device, you can run the display ont info command on the DSLAM to query the optical network terminal (ONT) information of the xPON board.
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
Politically sensitive content
Content concerning pornography, gambling, and drug abuse
Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."