SLAVE_BAD

liqiang185 · Created Mar 16, 2021 03:45:34

Thanks for sharing!
The SLAVE_BAD alarm indicates that the connection between the alarmed board and the standby system control and timing board fails or that the connection between the alarmed board and the GE bus of the standby system control and timing board fails.

Unicef · Created Mar 16, 2021 03:51:54

Very good friend!

Parameters 2 and 3 :)

Indicate the slot ID of a board when the system control board performs the reporting.
Indicate the slot ID of the standby system control board when the service board performs the reporting.

Possible Root Cause:

Cause 1: The standby system control and timing board is faulty.
Cause 2: The alarmed board is faulty.
Cause 3: The chassis is faulty.

Thanks!

Chanphirun · Created Mar 16, 2021 04:27:33

Posted by liqiang185 at 2021-03-16 03:45 Thanks for sharing!The SLAVE_BAD alarm indicates that the connection between the alarmed board and t ...

this is base on my practice that we can clear this. mostly, pin broken inside sub-rack.

alopez · Created Apr 11, 2021 18:39:30

All right. Thank you, dear friend!!

Ayeshaali · Created Apr 11, 2021 18:48:07

Thanks for sharing

Ayeshaali · Created Apr 11, 2021 18:48:14

SLAVE_BAD

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

SLAVE_BAD

Third Party’s Trade Secret

My Followers