SFP Modules

Created: Nov 22, 2019 12:34:32Latest reply: Nov 22, 2019 13:23:49 87 2 1 0
  Rewarded Hi-coins: 0 (problem resolved)

Does  the S2700/3700/5700/6700/7700 Support the Optical Modules of Other Vendors?


  • x
  • convention:

Featured Answers
umaryaqub
MVE Created Nov 22, 2019 12:44:07 Helpful(1) Helpful(1)

HI,

It can support but it is NEVER recommended to use 3rd party SFPs. To use it, use following command:

<HUAWEI> system-view
[~HUAWEI] transceiver non-certified-alarm disable
[*HUAWEI] commit
  • x
  • convention:

A%20network%20professional%20eager%20to%20learn%20and%20help.I%20have%208%20years%20of%20network%20experience%20and%20I%20am%20working%20with%20Huawei%20VAP%20and%20looking%20after%20IP%20Projects%20design.
DDSN
Admin Created Nov 22, 2019 13:23:49 Helpful(1) Helpful(1)

Yes,it support.But it is not recommended to use non-Huawei-certified optical modules. The use of non-Huawei-certified optical modules is risky and may cause the following problems:
1.Non-standard structure and size cause failures to install optical modules on adjacent optical interfaces.
Structures or sizes of some non-Huawei-certified optical modules do not comply with the Multi-Source Agreement (MSA).When such an optical module is installed on an optical interface, the size of this optical module hinders optical module installation on adjacent optical interfaces.
2.Data bus defects cause suspension of a switch's data bus.
Some non-Huawei-certified optical modules have defects in data bus designs. Using such an optical module on a switch causes suspension of the connected data bus on the switch. As a result, data on the suspended bus cannot be read.
3.Improper edge connector size damages electronic devices of optical interfaces.
If a non-Huawei-certified switch optical module with improper edge connector size is used on an optical interface, electronic devices of the optical interface will be damaged by short circuits.
4.Unnormalized temperature monitoring causes incorrect alarms.
The temperature monitoring systems of some non-Huawei-certified switch optical modules do not comply with industry standards and report temperature values higher than the real temperature. When such optical modules are used on a switch, the system will report incorrect temperature alarms.
5.Improper register settings cause errors or failures in reading parameters or diagnostic information.
Some non-Huawei-certified switch optical modules have improper register values on page A0, which can cause errors or failures when the system attempts to read parameters or diagnostic information from a data bus.
6.Some non-Huawei-certified switch optical modules are not designed in compliance with EMC standards and have low anti-interference capability. Additionally, they bring electromagnetic interference to nearby devices.
7.The operating temperature ranges of non-Huawei-certified switch optical modules cannot meet service requirements. When they are used under relatively high temperature, the optical power decreases, resulting in service interruption.
  • x
  • convention:

All Answers
umaryaqub
umaryaqub MVE Created Nov 22, 2019 12:44:07 Helpful(1) Helpful(1)

HI,

It can support but it is NEVER recommended to use 3rd party SFPs. To use it, use following command:

<HUAWEI> system-view
[~HUAWEI] transceiver non-certified-alarm disable
[*HUAWEI] commit
  • x
  • convention:

A%20network%20professional%20eager%20to%20learn%20and%20help.I%20have%208%20years%20of%20network%20experience%20and%20I%20am%20working%20with%20Huawei%20VAP%20and%20looking%20after%20IP%20Projects%20design.
DDSN
DDSN Admin Created Nov 22, 2019 13:23:49 Helpful(1) Helpful(1)

Yes,it support.But it is not recommended to use non-Huawei-certified optical modules. The use of non-Huawei-certified optical modules is risky and may cause the following problems:
1.Non-standard structure and size cause failures to install optical modules on adjacent optical interfaces.
Structures or sizes of some non-Huawei-certified optical modules do not comply with the Multi-Source Agreement (MSA).When such an optical module is installed on an optical interface, the size of this optical module hinders optical module installation on adjacent optical interfaces.
2.Data bus defects cause suspension of a switch's data bus.
Some non-Huawei-certified optical modules have defects in data bus designs. Using such an optical module on a switch causes suspension of the connected data bus on the switch. As a result, data on the suspended bus cannot be read.
3.Improper edge connector size damages electronic devices of optical interfaces.
If a non-Huawei-certified switch optical module with improper edge connector size is used on an optical interface, electronic devices of the optical interface will be damaged by short circuits.
4.Unnormalized temperature monitoring causes incorrect alarms.
The temperature monitoring systems of some non-Huawei-certified switch optical modules do not comply with industry standards and report temperature values higher than the real temperature. When such optical modules are used on a switch, the system will report incorrect temperature alarms.
5.Improper register settings cause errors or failures in reading parameters or diagnostic information.
Some non-Huawei-certified switch optical modules have improper register values on page A0, which can cause errors or failures when the system attempts to read parameters or diagnostic information from a data bus.
6.Some non-Huawei-certified switch optical modules are not designed in compliance with EMC standards and have low anti-interference capability. Additionally, they bring electromagnetic interference to nearby devices.
7.The operating temperature ranges of non-Huawei-certified switch optical modules cannot meet service requirements. When they are used under relatively high temperature, the optical power decreases, resulting in service interruption.
  • x
  • convention:

Comment

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login