The UOA is not deployed on the VCN5X0. Before connecting the VCN5X0 to eSight, you need to set the UOA IP address and port number on the OMU portal to connect the VCN5X0 to UOA.
Procedure
- Add the VCN5X0 IP address to the general server
where the UOA is deployed.
- Log in to the general server where the UOA is installed as the root user.
- Stop the UOA service. For details about the operations, see Manually Starting and Stopping the UOA.
- Add the VCN5X0 IP address to the
adapter.acl file in
/home/uoausr/uoasetup/cfg/system.
cd /home/uoausr/uoasetup/cfg/system
vi adapter.acl
Press Enter to start a new line and enter the IP address to add.
192.168.117.50192.168.117.225
- Press Esc and run the :wq command to save the settings and exit.
- Start the UOA service. For details about the operations, seeManually Starting and Stopping the UOA.
- Set
UOA parameters on the OMU portal of VCN5X0.
- Log in to the OMU portal as the admin user.
- Choose Maintenance > Unified Configuration. The Unified Configuration page is displayed.
- In the System Domains panel on the left, select the VCN5X0 NE node.
- On the Unified Configuration tab page, select OMU from the Module name drop-down list box, select NMS Parameter from the Parameter type drop-down list box, and click Search, as shown in Figure 1. Then set UOA parameters that are displayed.
Figure 1 Configure the IP address for the server where the UOA is to be deployed on the OMU portal
http://localhost:7890/pages/CEH0706J/03/CEH0706J/03/resources/en-us_image_0114552363.pnghttp://localhost:7890/pages/CEH0706J/03/CEH0706J/03/resources/public_sys-resources/icon-note.gif NOTE:The UOA_ip parameter indicates the IP address of the general server where the UOA is deployed for connecting to the VCN5X0. Set UOA_port to 6700.
