Got it

Setting the Maximum Transmission Rate of an Interface

435 0 0 0 0
The more BPDUs sent from an interface within a Hello Time interval, the more system resources consumed. Setting a proper transmission rate (packet-number) on an interface prevents excess bandwidth usage when network flapping occurs.

The system view is displayed.

interface interface-type interface-number
The view of an Ethernet interface participating in STP calculation is displayed.

stp transmit-limit packet-number
The maximum transmission rate of BPDUs (BPDUs per second) is set for the interface.

By default, an interface sends a maximum of six BPDUs per second. If the same maximum transmission rate of BPDUs needs to be sent for each interface on a device, run the stp transmit-limit (system view) command.
  • x
  • convention:


You need to log in to comment to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits


Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Please bind your phone number to obtain invitation bonus.