Setting Network Priorities

This procedure uses VP1 as  an example and is also applicable to VP2.

1. In the Network Connections window, choose Advanced > Advanced Settings, as shown in Figure 1.

   The Advanced Settings dialog box is displayed.

   Figure 1 Network Connections window
   http://localhost:7890/pages/SEE1219N/13/SEE1219N/13/resources/SMC_cisg/en-us_image_0027008787.jpg
   http://localhost:7890/pages/SEE1219N/13/SEE1219N/13/resources/public_sys-resources/icon-note.gif NOTE:

   If the menu bar is not displayed in the Network Connections window, choose Organize > Layout > Menu bar to display the menu bar.

2. Click the Adapters and Bindings tab, click http://localhost:7890/pages/SEE1219N/13/SEE1219N/13/resources/SMC_cisg/en-us_image_0027008686.png or http://localhost:7890/pages/SEE1219N/13/SEE1219N/13/resources/SMC_cisg/en-us_image_0027008694.png under Connections to adjust the connection priorities to SMC2.0 > heartbeat > iSCSIA > iSCSIB as shown in Figure 2.
   Figure 2 Adapters and Bindings tab
   http://localhost:7890/pages/SEE1219N/13/SEE1219N/13/resources/SMC_cisg/en-us_image_0027008602.png
   http://localhost:7890/pages/SEE1219N/13/SEE1219N/13/resources/SMC_cisg/en-us_image_0027008739.jpg

3. Click OK.