Set VLAN on PTM interface on AR129
Created: Dec 7, 2021 13:14:07Latest reply: Dec 7, 2021 13:33:26
208
6
0
0
0
Rewarded HiCoins：
0
(problem resolved)
Hello, I'm trying to set a VDSL connection on my AR129CVW router, but some of the features I can find on the forum are missing:
This Huawei page shows this screenshot:
but on my end, the Interface name menu is empty (even if I can see an interface under the interface list, named Ethernet0/0/0).
My problem is that it looks like the only way to change that vlan setting and add username/password to the connection is by creating a new interface, thing that I cannot do since the "Interface name" menu is empty.
Also, I tried using the service-port command, but on my device it doesn't even exist.
<Huawei AR129CVW>system-view Enter system view, return user view with Ctrl+Z. [Huawei AR129CVW]service-port ^ Error: Unrecognized command found at '^' position. [Huawei AR129CVW]servi? ^ Error: Unrecognized command found at '^' position.
A display version might be useful:
[Huawei AR129CVW]dis version Huawei Versatile Routing Platform Software VRP (R) software, Version 5.170 (AR120 V200R008C50SPC500) Copyright (C) 2011-2017 HUAWEI TECH CO., LTD Huawei AR129CVW Router uptime is 0 week, 0 day, 0 hour, 10 minutes MPU 0(Master) : uptime is 0 week, 0 day, 0 hour, 9 minutes SDRAM Memory Size : 512 M bytes Flash 0 Memory Size : 512 M bytes MPU version information : 1. PCB Version : AR129CGVW-L VER.C 2. MAB Version : 0 3. Board Type : AR129CVW 4. BootROM Version : 1
And those are the details of the connection I have to configure:
Encapsulation: PTM VLAN: 1036 Username/Password: vodafonedsl NAT: Enabled
Any help would be appreciated, thanks in advance!
- x
- convention：
- Emotion(0)
Featured Answers
user_4208193
Created Dec 7, 2021 15:11:06
(0)
(0)
Thanks for your answer, but that documentation still doesn't tell me the commands used to set a VLAN and the credentials to the PTM interface 
fuzi_yao
Reply user_4208193 Created Dec 8, 2021 04:59:58
(0)
(0)
Hi, friend! By default, the VDSL interface works in PTM mode. As for the VLAN, you do not understand the VLAN. Can you give me an example?
user_4208193
Reply fuzi_yao Created Dec 9, 2021 11:12:00
(0)
(0)
The Vodafone official websites says I have to set a VLAN on my VDSL interface, I don't understand it either so I thought I could ask here.
fuzi_yao
Reply user_4208193 Created Dec 9, 2021 11:15:14
(0)
(0)
Hi, friend! Ha-ha, okay. In my understanding, you only need to configure the VDSL interface to work in PTM mode. No VLAN is configured. At least in Huawei. |
All Answers
user_4208193
Created Dec 7, 2021 15:11:06
(0)
(0)
Thanks for your answer, but that documentation still doesn't tell me the commands used to set a VLAN and the credentials to the PTM interface
fuzi_yao
Reply user_4208193 Created Dec 8, 2021 04:59:58
(0)
(0)
Hi, friend! By default, the VDSL interface works in PTM mode. As for the VLAN, you do not understand the VLAN. Can you give me an example?
user_4208193
Reply fuzi_yao Created Dec 9, 2021 11:12:00
(0)
(0)
The Vodafone official websites says I have to set a VLAN on my VDSL interface, I don't understand it either so I thought I could ask here.
fuzi_yao
Reply user_4208193 Created Dec 9, 2021 11:15:14
(0)
(0)
Hi, friend! Ha-ha, okay. In my understanding, you only need to configure the VDSL interface to work in PTM mode. No VLAN is configured. At least in Huawei. |
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
