This section describes how to set on FusionSolar the grid and protection parameters for the SUN2000 inverters.
Procedure
1. Select the plant
From the Home Page select the plant and the default plant page will be open:
2. Select the inverter
From the plant page select Device Management and the devices management page will be open.
Select the inverter and choose Device Parameter Settings and the device settings page will be open.
3. Set the grid code parameters
From the Device Settings page select the Grid Parameter and set the recommended parameter and the grid code. Confirm with Set.
4. Set the protection parameters
From the Device Settings page select Protection Parameter and set the recommended protection parameter. Confirm with Set.
Note: it is recommended to change the grid or protection parameters only if the grid operator or Huawei service approve this operation.
