This section describes how to set alarm notification on FusionSolar.
If the notification setting is not available in your installer account please contact the service team to enable for you at: eu_inverter_support@huawei.com.
Procedure
1. On the system homepage, click Settings to go to the System Setting interface.
2. Click Parameter Setting in the navigation bar on the left. By default, Parameter Table Setting will be opened.
3. Click Notification Setting and select New template. The organization structure and alarm template list will be displayed in the interface.
4. In the Push settings set the template name, select the device type and search. From the display alarms you can choose what alarms you want to receive or you can select all. Set the application range, and click Next
5. Select the plant and click Next
6. Click in the user tab to select the user/s that you want to receive the alarm notification. If you want to add more rules for this plant select Add
7. Confirm the user to receive notification alarm and Save
8. Modify or delete the alarm notification
· Modify Alarm Pushing
a. In the alarm template list, click Modify to edit push settings, and the Notification Setting dialog box is displayed.
b. Modify the template information, application range and push users according to the actual situation.
c. Click Save to get the prompt dialog box popped up.
d. Click OK. The modification is completed.
· Cancel Alarm Pushing
a. In alarm template list, select the alarm template to be delete (multiple), and click Delete to get the prompt dialog box popped up.
b. Click OK to delete.
