Service port

Hello, friend!

multi-service: Indicates the multi-service virtual port service. The multi-service virtual port service indicates that a user port needs to carry multiple services, and the service types must be differentiated.

user-vlan: Indicates the user-side VLAN ID. When you need to distinguish users by user-side VLAN, use this parameter.

tag-transform: Indicates the VLAN tag translation mode. VLAN tags of packets are switched in both the upstream and downstream directions.

translate: Translation mode: The UGW9811 translates the C-VLAN carried on the user side to an S-VLAN. This mode is used when only one VLAN tag can be used to identify user services and the service VLAN configured on the MA5800 is different from the VLAN in user-side packets.

inbound traffic-table index 55 outbound traffic-table index 55

inbound and outbound indicate upstream and downstream traffic.

Bind service port 20 to traffic profile 50 to implement upstream and downstream traffic control.

Yes, you can run the following command to configure the service port.

Thanks!