service configuration in OSN 550
- x
- convention：
- Emotion(0)
|
Dear friend! Your demands are not met.
Which port in the middle is the management port of the device and cannot transmit services. The ports on both sides are GE/10GE packet signal ports, which are connected to remote transmission devices through optical fibers. You can use these two ports to form a ring network or a 1+1 line protection network with other OptiX OSN 550s. Thanks! |
|
|
Dear friend! Your demands are not met.
Which port in the middle is the management port of the device and cannot transmit services. The ports on both sides are GE/10GE packet signal ports, which are connected to remote transmission devices through optical fibers. You can use these two ports to form a ring network or a 1+1 line protection network with other OptiX OSN 550s. Thanks! |
|
liqiang185
Created Feb 25, 2021 08:46:18
(0)
(0)
All ports on the EM6T board can be interconnected with only packet ports on the peer end. Other services are not supported. The 10GE ports on the PEX board of the OptiX OSN 550 are also the same. |
Comment
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
