Huawei Enterprise Support Community

Results: Found related users 0, related groups 0, related topics 59, related cases 31, related FAQ 10

All User Group Post Case FAQ

OptiX OSN 9800 Standards compliance

What are the standards that the OptiX OSN 9800 complies with?

2022-4-3

kcyjtion - Transmission Network

152 2
SNMP E9612 - Optix OSN 9800

Hello Dears, How to enable SNMP on NCE and CLI of equipments E9612 - Optix OSN 9800 ?

2021-9-14

Diego.Silva - Transmission Network

479 3
The OptiX OSN 9800 reports multiple Commun_FAIL alarms.

The OptiX OSN 9800 U16 reports multiple Commun_FAIL alarms.

2021-5-24

user_3958443 - Transmission Network

258 2
How to query label of OptiX OSN 9800 UPS subrack on the U2000

I need to query the label on the shelf of the OptiX OSN 9800 UPS, but no person exists on the equipment side.

2021-4-28

kcyjtion - Transmission Network

265 1
OptiX OSN 9800 M24--Alarms are reported for multiple services due to board faults

Problem Description The customer reported several ODUflex services have abnormal alarms on OptiX OSN 9800 M24.

2021-5-31

liqiang185 - Transmission Network

807 19
OptiX OSN 9800 -- The optical power adjustment is abnormal.

OSN 9800s are used at two sites A and B.

2021-6-30

DAYTOY - Transmission Network

256 3
Why does the S2N504 fail to be added on the OptiX OSN 9800 M24?

More cases of the same type: Can't adjust Current in Supply management OSN 9800 M05 We can not add board GIN401 of OSN 9800 M24 M24 OSN 9800 ...

2022-3-17

wwww20011 - Transmission Network

149 1
OSN 9800 U32 ,OTN

The FE port on the OptiX OSN 9800 U32 is reserved and has no function at present.

2021-12-11

Kamran_ali3 - Transmission Network

405 6
M24 OSN 9800

All boards of the T404 support the 1:3 mode of the OptiX OSN 9800 M24.

2021-9-16

Ahmadmassa - Transmission Network

337 2
Is there any Web LCT for OSN 9800

You can use the Web LCT to commission the OptiX OSN 9800 only if...For example, the following OptiX OSN 9800 versions can be managed...

2022-3-9

dostwaxir - Transmission Network

223 5

 12 3 4 5 6 

【Knowledge Base】 Boards are displayed in slashes on the NE panel and cannot be selected.

The WDM device is OptiX OSN 9800 M12.

2021-12-02 Knowledge Base
【Knowledge Base】 OTUCN_LOF alarm on OSN 902 for 200G lambda

The customer is deploying 200G service with OSN 902 + Optix OSN ...Note: The topology only shows the electrical line sites and the Relay site, the optical...

2020-07-24 Knowledge Base
【Knowledge Base】 Unused channels are scanned due to the version of the OPM8 firmware

OSN 9800 M24 The customer uses the OPM8 board to scan unused channels.195.9 The firmware version of the OPM module is too early.

2022-02-16 Knowledge Base
【Knowledge Base】 RAU201 Low Gain

About RAU2 ( OSN 9800 ) reported alarm ,RPC (BWS1600) not reported ,because the RAU2 board has higher requirements on fiber quality. solution is to solve the optical...

2021-07-30 Knowledge Base
【Knowledge Base】 Not able to bring new NE in to existing ASON Domain

On existing NE (NE-5) , slot 11 port 1 and port 2 is facing HW-M24-20 For the 2 new 9800 ...Therefore, for the existing NE, the port that facing to 9800 M24 also need changed...

2022-03-17 Knowledge Base
【Knowledge Base】 FAQ：15分钟性能值有光为何单板光功率管理显示-60

某据点一块 OSN 9800 设备的S7N402单板接收光功率显示-60，但是查询15分钟性能值有数值当前光功率显示：查询当前15分钟性能值： R_LOS告警实际激光机输入光功率最近值不在正常范围内，单波未调整，物理尾纤异常等导致，输入的信号光异常，读出来的光功率管理显示为-60 1：单板，光口故障，两个光口同时坏的可能性非常小...

2021-08-23 Knowledge Base
【Knowledge Base】 The OD fails to be created when the G2HSC1 board is used as the optical monitoring board.

All devices are OSN 9800 M12, the NCE-T version is R20C10SPC300.

2021-12-25 Knowledge Base
【Knowledge Base】 RAMAN amplifier is not working

Customer complain that their RAMAN is not working. After further checking, found that customer removed the RAMAN board and cannot delete the unused IPA configuration 1: contact the...

2021-12-30 Knowledge Base
【Knowledge Base】 OSN 9800 subrack ID display

The customer needs to add an OSN 9800 universal platform subrack at a site as a slave subrack.

2020-01-14 Knowledge Base
【Knowledge Base】 NE_COMMU_BREAK, NE_NOT_LOGIN, GNE_CONNECT_FAIL alarms were reported on GNE and the GNE is unmanageable from NMS.

Customer reported the NE which is also a GNE was unmanageable from NMS.Query and configuration operation cannot be done at this state.Connection between NE and U2000 server is interrupted...

2021-09-15 Knowledge Base

 12 3 4 

Filter by Time

Did not find what you were looking for?

Search on support.huawei.com

Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.

Please bind your phone number to obtain invitation bonus.

Post More>

Case More>

【Knowledge Base】 Boards are displayed in slashes on the NE panel and cannot be selected.

【Knowledge Base】 OTUCN_LOF alarm on OSN 902 for 200G lambda

【Knowledge Base】 Unused channels are scanned due to the version of the OPM8 firmware

【Knowledge Base】 RAU201 Low Gain

【Knowledge Base】 Not able to bring new NE in to existing ASON Domain

FAQ More>

【FAQ】 Clock synchronization modes supported by OptiX OSN 9800

【FAQ】 Licenses for OptiX OSN 9800

【FAQ】 OptiX OSN 9800

【FAQ】 Reason why OSN 9800 has no complete HedEx package like other WDM products

【FAQ】 Product series of the WDM product family

【Knowledge Base】 Boards are displayed in slashes on the NE panel and cannot be selected.

【Knowledge Base】 OTUCN_LOF alarm on OSN 902 for 200G lambda

【Knowledge Base】 Unused channels are scanned due to the version of the OPM8 firmware

【Knowledge Base】 RAU201 Low Gain

【Knowledge Base】 Not able to bring new NE in to existing ASON Domain

【Knowledge Base】 FAQ：15分钟性能值有光为何单板光功率管理显示-60

【Knowledge Base】 The OD fails to be created when the G2HSC1 board is used as the optical monitoring board.

【Knowledge Base】 RAMAN amplifier is not working

【Knowledge Base】 OSN 9800 subrack ID display

【Knowledge Base】 NE_COMMU_BREAK, NE_NOT_LOGIN, GNE_CONNECT_FAIL alarms were reported on GNE and the GNE is unmanageable from NMS.

【FAQ】 Clock synchronization modes supported by OptiX OSN 9800

【FAQ】 Licenses for OptiX OSN 9800

【FAQ】 OptiX OSN 9800

【FAQ】 Reason why OSN 9800 has no complete HedEx package like other WDM products

【FAQ】 Product series of the WDM product family

【FAQ】 Cabinets for installing OptiX OSN 9800 U64 subracks

【FAQ】 Differences of the dimensions between OptiX OSN 9800 U64 and U32 subracks

【FAQ】 Whether system control boards are required when NG WDM devices are used as slave subracks

【FAQ】 Whether there are risks when the DCN gateway of OptiX OSN 9800 is switched

【FAQ】 Whether the N402 board and the T302 board on OptiX OSN 9800 support IEEE 1588v2

Filter by Time

Filter by Time

Did not find what you were looking for?