Huawei Enterprise Support Community

Results: Found related users 0, related groups 0, related topics 112, related cases 31, related FAQ 10

All User Group Post Case FAQ

Post More>

OptiX OSN 9800 Standards compliance

What are the standards that the OptiX OSN 9800 complies with?

2022-4-3

kcyjtion - Transmission Network

152 2
SNMP E9612 - Optix OSN 9800

Hello Dears, How to enable SNMP on NCE and CLI of equipments E9612 - Optix OSN 9800 ?

2021-9-14

Diego.Silva - Transmission Network

481 3
Power consumption of the OptiX OSN 9800

The power consumption of the OptiX OSN 9800 universal equipment is as follows: I hope it helps you.

2020-4-27

user_40157594 - Transmission Network

542 2
Optical MUX / DEMUX in DEDM Optix OSN 9800

discuss the different types of optical MUX / DEMUX in OPTIX OSN 9800 based on functionality and features of each board...

2019-1-10

mohamed.saeed - Transmission Network

1166 3
Huawei OptiX OSN 9800 OTN Platform - transmission at its best

But let's cut the chatter and let's discover the Huawei OptiX OSN 9800 ...BACKGROUND INFORMATION To start with, we ought to better understand what the Huawei

2021-1-20

dragos_v - Transmission Network

417 7

Case More>

【Knowledge Base】 Boards are displayed in slashes on the NE panel and cannot be selected.

The WDM device is OptiX OSN 9800 M12.

2021-12-02 Knowledge Base
【Knowledge Base】 OTUCN_LOF alarm on OSN 902 for 200G lambda

The customer is deploying 200G service with OSN 902 + Optix OSN ...Note: The topology only shows the electrical line sites and the Relay site, the optical...

2020-07-24 Knowledge Base
【Knowledge Base】 Unused channels are scanned due to the version of the OPM8 firmware

OSN 9800 M24 The customer uses the OPM8 board to scan unused channels.195.9 The firmware version of the OPM module is too early.

2022-02-16 Knowledge Base
【Knowledge Base】 RAU201 Low Gain

About RAU2 ( OSN 9800 ) reported alarm ,RPC (BWS1600) not reported ,because the RAU2 board has higher requirements on fiber quality. solution is to solve the optical...

2021-07-30 Knowledge Base
【Knowledge Base】 Not able to bring new NE in to existing ASON Domain

On existing NE (NE-5) , slot 11 port 1 and port 2 is facing HW-M24-20 For the 2 new 9800 ...Therefore, for the existing NE, the port that facing to 9800 M24 also need changed...

2022-03-17 Knowledge Base

FAQ More>

【FAQ】 Clock synchronization modes supported by OptiX OSN 9800

When an OptiX OSN 9800 device interconnects with an MSTP or PTN device, an OptiX OSN 8800 T16 subrack can be used as an optical NE on the OptiX OSN 9800 device to achieve end-to-end clock transmission such as the IEEE 1588v2 clock, synchron...

FAQ - Transport&Access Network
【FAQ】 Licenses for OptiX OSN 9800

A license granted by Huawei permits a customer to use the licensed product within a specific use scope and for a specific duration. The customer can also obtain the services committed by Huawei. The OptiX OSN 9800 license includes the featu...

FAQ - Transport&Access Network
【FAQ】 OptiX OSN 9800

To meet ultra-large cross-connect capacity and bandwidth requirements, Huawei presents the OptiX OSN 9800 product series. The OptiX OSN 9800 product series include the OptiX OSN 9800 U64, U32, P18 and universal platform subracks. Applied at...

FAQ - Transport&Access Network
【FAQ】 Reason why OSN 9800 has no complete HedEx package like other WDM products

Based on a customer demand survey and analysis and according to five user roles divided by customer work responsibilities and project phases, the following HedEx documents are provided for OSN 9800: -OptiX OSN 9800 Planning Your Network -Op...

FAQ - Transport&Access Network
【FAQ】 Product series of the WDM product family

Huawei WDM/OTN series end-to-end intelligent optical transport platforms are applicable to the backbone core layer, metro core layer, metro convergence layer, and metro edge access layer. These series platforms support universal switching a...

FAQ - Transport&Access Network

[OTN Products]List of Board Datasheets

Product Datasheet OptiX OSN 1800 Link OptiX OSN 8800 Link OptiX OSN 9800 Link...

2016-1-14

h00350168 - Transmission Network

2368 2
Creating Services OSN 1800 V Pro K1EX10 >< OSN 9800 M24 T220E

Please note that the TMK1EX10 of the OptiX OSN 1800 is a packet service processing board....The T220E board of the OptiX OSN 9800 M24 is a common OTN tribu ...

2022-3-30

wx922090 - Transmission Network

160 3
WDM

what is the main differences between Huawei optix osn 9800 ups and U 64 with repect to hardware design...

2019-1-31

mohamed.saeed - Transmission Network

488 3
OSN 9800UPS and OSN 1800V connected via Extended ECC

Check whether the subrack IDs on the OptiX OSN 9800 UPS are duplicated.

2021-12-11

user_3320147 - Transmission Network

246 4
Do Huawei have Bidirectional DWDM solution for Optix OSN 8800 T16, 32 or 9800 UPS platform

Hello, OptiX OSN 8800 T32 Subrack There are two types of OptiX ...Figure 1 Structure of OptiX OSN 8800 T32 subrack 1.

2020-7-9

jahangirgp - Transmission Network

426 4
I recommend the Transmission OTN/WDM OSN 6800

In addition, some boards can be used on OSN 3800 / 6800 / 8800 at the same time. and the OptiX OSN 6800 can be used as a slave subrack of the OptiX OSN 8800 ...

2021-7-1

Malik3000 - Transmission Network

784 12
Multiple OSN 9800 UXCS boards are faulty due to high temperature

Problem Description Multiple cross-connect boards on an OptiX OSN 9800 ...Summary The OptiX OSN 9800 U series equipment uses the π-pattern ventila ...

2020-6-24

liqiang185 - Transmission Network

1335 27
Unsupported subrack or board type. error code:1090593579 technical issue on a 9800 M12 shelf

Valid Slots as per products: OptiX OSN 9800 M24 subrack : In 1:1 mode: IU1-IU24 | In 1:3 mode: IU1-IU5, IU8-IU17, IU20-IU24 OptiX OSN 9800 ...

2022-2-2

never7 - Transmission Network

141 4
How to handle the J0_MM alarm

An ELOM board on an OptiX OSN 9800 NE reports the J0_MM alarm.

2020-6-11

kcyjtion - Transmission Network

584 3
How to deal with the COMMUN_FAIL Alarm

What should I do for the OptiX OSN 9800 U16 reports an COMMUN_FAIL alarm?

2021-6-16

user_3958443 - Transmission Network

470 2

 1 2 345 6 ···12 

【Knowledge Base】 Boards are displayed in slashes on the NE panel and cannot be selected.

The WDM device is OptiX OSN 9800 M12.

2021-12-02 Knowledge Base
【Knowledge Base】 OTUCN_LOF alarm on OSN 902 for 200G lambda

The customer is deploying 200G service with OSN 902 + Optix OSN ...Note: The topology only shows the electrical line sites and the Relay site, the optical...

2020-07-24 Knowledge Base
【Knowledge Base】 Unused channels are scanned due to the version of the OPM8 firmware

OSN 9800 M24 The customer uses the OPM8 board to scan unused channels.195.9 The firmware version of the OPM module is too early.

2022-02-16 Knowledge Base
【Knowledge Base】 RAU201 Low Gain

About RAU2 ( OSN 9800 ) reported alarm ,RPC (BWS1600) not reported ,because the RAU2 board has higher requirements on fiber quality. solution is to solve the optical...

2021-07-30 Knowledge Base
【Knowledge Base】 Not able to bring new NE in to existing ASON Domain

On existing NE (NE-5) , slot 11 port 1 and port 2 is facing HW-M24-20 For the 2 new 9800 ...Therefore, for the existing NE, the port that facing to 9800 M24 also need changed...

2022-03-17 Knowledge Base
【Knowledge Base】 FAQ：15分钟性能值有光为何单板光功率管理显示-60

某据点一块 OSN 9800 设备的S7N402单板接收光功率显示-60，但是查询15分钟性能值有数值当前光功率显示：查询当前15分钟性能值： R_LOS告警实际激光机输入光功率最近值不在正常范围内，单波未调整，物理尾纤异常等导致，输入的信号光异常，读出来的光功率管理显示为-60 1：单板，光口故障，两个光口同时坏的可能性非常小...

2021-08-23 Knowledge Base
【Knowledge Base】 The OD fails to be created when the G2HSC1 board is used as the optical monitoring board.

All devices are OSN 9800 M12, the NCE-T version is R20C10SPC300.

2021-12-25 Knowledge Base
【Knowledge Base】 RAMAN amplifier is not working

Customer complain that their RAMAN is not working. After further checking, found that customer removed the RAMAN board and cannot delete the unused IPA configuration 1: contact the...

2021-12-30 Knowledge Base
【Knowledge Base】 OSN 9800 subrack ID display

The customer needs to add an OSN 9800 universal platform subrack at a site as a slave subrack.

2020-01-14 Knowledge Base
【Knowledge Base】 NE_COMMU_BREAK, NE_NOT_LOGIN, GNE_CONNECT_FAIL alarms were reported on GNE and the GNE is unmanageable from NMS.

Customer reported the NE which is also a GNE was unmanageable from NMS.Query and configuration operation cannot be done at this state.Connection between NE and U2000 server is interrupted...

2021-09-15 Knowledge Base

 12 3 4 

Filter by Time

Did not find what you were looking for?

Search on support.huawei.com

Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.

Please bind your phone number to obtain invitation bonus.

Post More>

Case More>

【Knowledge Base】 Boards are displayed in slashes on the NE panel and cannot be selected.

【Knowledge Base】 OTUCN_LOF alarm on OSN 902 for 200G lambda

【Knowledge Base】 Unused channels are scanned due to the version of the OPM8 firmware

【Knowledge Base】 RAU201 Low Gain

【Knowledge Base】 Not able to bring new NE in to existing ASON Domain

FAQ More>

【FAQ】 Clock synchronization modes supported by OptiX OSN 9800

【FAQ】 Licenses for OptiX OSN 9800

【FAQ】 OptiX OSN 9800

【FAQ】 Reason why OSN 9800 has no complete HedEx package like other WDM products

【FAQ】 Product series of the WDM product family

【Knowledge Base】 Boards are displayed in slashes on the NE panel and cannot be selected.

【Knowledge Base】 OTUCN_LOF alarm on OSN 902 for 200G lambda

【Knowledge Base】 Unused channels are scanned due to the version of the OPM8 firmware

【Knowledge Base】 RAU201 Low Gain

【Knowledge Base】 Not able to bring new NE in to existing ASON Domain

【Knowledge Base】 FAQ：15分钟性能值有光为何单板光功率管理显示-60

【Knowledge Base】 The OD fails to be created when the G2HSC1 board is used as the optical monitoring board.

【Knowledge Base】 RAMAN amplifier is not working

【Knowledge Base】 OSN 9800 subrack ID display

【Knowledge Base】 NE_COMMU_BREAK, NE_NOT_LOGIN, GNE_CONNECT_FAIL alarms were reported on GNE and the GNE is unmanageable from NMS.

【FAQ】 Clock synchronization modes supported by OptiX OSN 9800

【FAQ】 Licenses for OptiX OSN 9800

【FAQ】 OptiX OSN 9800

【FAQ】 Reason why OSN 9800 has no complete HedEx package like other WDM products

【FAQ】 Product series of the WDM product family

【FAQ】 Cabinets for installing OptiX OSN 9800 U64 subracks

【FAQ】 Differences of the dimensions between OptiX OSN 9800 U64 and U32 subracks

【FAQ】 Whether system control boards are required when NG WDM devices are used as slave subracks

【FAQ】 Whether there are risks when the DCN gateway of OptiX OSN 9800 is switched

【FAQ】 Whether the N402 board and the T302 board on OptiX OSN 9800 support IEEE 1588v2

Filter by Time

Filter by Time

Did not find what you were looking for?