Results: Found related users 0, related groups 0, related topics 112, related cases 31, related FAQ 10
Post More>
-
OptiX OSN 9800 Standards compliance
What are the standards that the OptiX OSN 9800 complies with?
2022-4-3
kcyjtion - Transmission Network
152 2 -
SNMP E9612 - Optix OSN 9800
Hello Dears, How to enable SNMP on NCE and CLI of equipments E9612 - Optix OSN 9800 ?
2021-9-14
Diego.Silva - Transmission Network
479 3 -
Power consumption of the OptiX OSN 9800
The power consumption of the OptiX OSN 9800 universal equipment is as follows: I hope it helps you.
2020-4-27
user_40157594 - Transmission Network
542 2 -
Optical MUX / DEMUX in DEDM Optix OSN 9800
discuss the different types of optical MUX / DEMUX in OPTIX OSN 9800 based on functionality and features of each board...
2019-1-10
mohamed.saeed - Transmission Network
1166 3 -
Huawei OptiX OSN 9800 OTN Platform - transmission at its best
But let's cut the chatter and let's discover the Huawei OptiX OSN 9800 ...BACKGROUND INFORMATION To start with, we ought to better understand what the Huawei
2021-1-20
dragos_v - Transmission Network
417 7
Case More>
-
【Knowledge Base】 Boards are displayed in slashes on the NE panel and cannot be selected.
The WDM device is OptiX OSN 9800 M12.
2021-12-02 Knowledge Base
-
【Knowledge Base】 OTUCN_LOF alarm on OSN 902 for 200G lambda
The customer is deploying 200G service with OSN 902 + Optix OSN ...Note: The topology only shows the electrical line sites and the Relay site, the optical...
2020-07-24 Knowledge Base
-
【Knowledge Base】 Unused channels are scanned due to the version of the OPM8 firmware
OSN 9800 M24 The customer uses the OPM8 board to scan unused channels.195.9 The firmware version of the OPM module is too early.
2022-02-16 Knowledge Base
-
【Knowledge Base】 RAU201 Low Gain
About RAU2 ( OSN 9800 ) reported alarm ,RPC (BWS1600) not reported ,because the RAU2 board has higher requirements on fiber quality. solution is to solve the optical...
2021-07-30 Knowledge Base
-
【Knowledge Base】 Not able to bring new NE in to existing ASON Domain
On existing NE (NE-5) , slot 11 port 1 and port 2 is facing HW-M24-20 For the 2 new 9800 ...Therefore, for the existing NE, the port that facing to 9800 M24 also need changed...
2022-03-17 Knowledge Base
FAQ More>
-
【FAQ】 Clock synchronization modes supported by OptiX OSN 9800
When an OptiX OSN 9800 device interconnects with an MSTP or PTN device, an OptiX OSN 8800 T16 subrack can be used as an optical NE on the OptiX OSN 9800 device to achieve end-to-end clock transmission such as the IEEE 1588v2 clock, synchron...
-
【FAQ】 Licenses for OptiX OSN 9800
A license granted by Huawei permits a customer to use the licensed product within a specific use scope and for a specific duration. The customer can also obtain the services committed by Huawei. The OptiX OSN 9800 license includes the featu...
-
【FAQ】 OptiX OSN 9800
To meet ultra-large cross-connect capacity and bandwidth requirements, Huawei presents the OptiX OSN 9800 product series. The OptiX OSN 9800 product series include the OptiX OSN 9800 U64, U32, P18 and universal platform subracks. Applied at...
-
【FAQ】 Reason why OSN 9800 has no complete HedEx package like other WDM products
Based on a customer demand survey and analysis and according to five user roles divided by customer work responsibilities and project phases, the following HedEx documents are provided for OSN 9800: -OptiX OSN 9800 Planning Your Network -Op...
-
【FAQ】 Product series of the WDM product family
Huawei WDM/OTN series end-to-end intelligent optical transport platforms are applicable to the backbone core layer, metro core layer, metro convergence layer, and metro edge access layer. These series platforms support universal switching a...
Sorry, no matching result is found.
Sorry, no matching result is found.
-
Alarm reported due to mismatch of optical modules
During the deployment of an OptiX OSN 9800 , the TNV1N402C01 board reported the LASER_MODULE_MISMATCH alarm.
2020-4-14
liqiang185 - Transmission Network
569 1 -
Two of Knowledge Bookshelf For Enterprise Networking Management
Type Sub-category Product Document Name Document Type Network Management SingleOSS-FBB iManager U2000 U2000 V200R015C50SPC201 Patch Relationship Tree 01-A Configuration/commissionin...
2018-12-4
DDSN - Network Manager&SDN
812 5
-
【Knowledge Base】 Boards are displayed in slashes on the NE panel and cannot be selected.
The WDM device is OptiX OSN 9800 M12.
2021-12-02 Knowledge Base
-
【Knowledge Base】 OTUCN_LOF alarm on OSN 902 for 200G lambda
The customer is deploying 200G service with OSN 902 + Optix OSN ...Note: The topology only shows the electrical line sites and the Relay site, the optical...
2020-07-24 Knowledge Base
-
【Knowledge Base】 Unused channels are scanned due to the version of the OPM8 firmware
OSN 9800 M24 The customer uses the OPM8 board to scan unused channels.195.9 The firmware version of the OPM module is too early.
2022-02-16 Knowledge Base
-
【Knowledge Base】 RAU201 Low Gain
About RAU2 ( OSN 9800 ) reported alarm ,RPC (BWS1600) not reported ,because the RAU2 board has higher requirements on fiber quality. solution is to solve the optical...
2021-07-30 Knowledge Base
-
【Knowledge Base】 Not able to bring new NE in to existing ASON Domain
On existing NE (NE-5) , slot 11 port 1 and port 2 is facing HW-M24-20 For the 2 new 9800 ...Therefore, for the existing NE, the port that facing to 9800 M24 also need changed...
2022-03-17 Knowledge Base
-
【Knowledge Base】 FAQ：15分钟性能值有光为何单板光功率管理显示-60
某据点一块 OSN 9800 设备的S7N402单板接收光功率显示-60，但是查询15分钟性能值有数值 当前光功率显示： 查询当前15分钟性能值： R_LOS告警 实际激光机输入光功率最近值不在正常范围内，单波未调整，物理尾纤异常等导致，输入的信号光异常，读出来的光功率管理显示为-60 1：单板，光口故障，两个光口同时坏的可能性非常小...
2021-08-23 Knowledge Base
-
【Knowledge Base】 The OD fails to be created when the G2HSC1 board is used as the optical monitoring board.
All devices are OSN 9800 M12, the NCE-T version is R20C10SPC300.
2021-12-25 Knowledge Base
-
【Knowledge Base】 RAMAN amplifier is not working
Customer complain that their RAMAN is not working. After further checking, found that customer removed the RAMAN board and cannot delete the unused IPA configuration 1: contact the...
2021-12-30 Knowledge Base
-
【Knowledge Base】 OSN 9800 subrack ID display
The customer needs to add an OSN 9800 universal platform subrack at a site as a slave subrack.
2020-01-14 Knowledge Base
-
【Knowledge Base】 NE_COMMU_BREAK, NE_NOT_LOGIN, GNE_CONNECT_FAIL alarms were reported on GNE and the GNE is unmanageable from NMS.
Customer reported the NE which is also a GNE was unmanageable from NMS.Query and configuration operation cannot be done at this state.Connection between NE and U2000 server is interrupted...
2021-09-15 Knowledge Base
-
【FAQ】 Clock synchronization modes supported by OptiX OSN 9800
When an OptiX OSN 9800 device interconnects with an MSTP or PTN device, an OptiX OSN 8800 T16 subrack can be used as an optical NE on the OptiX OSN 9800 device to achieve end-to-end clock transmission such as the IEEE 1588v2 clock, synchron...
-
【FAQ】 Licenses for OptiX OSN 9800
A license granted by Huawei permits a customer to use the licensed product within a specific use scope and for a specific duration. The customer can also obtain the services committed by Huawei. The OptiX OSN 9800 license includes the featu...
-
【FAQ】 OptiX OSN 9800
To meet ultra-large cross-connect capacity and bandwidth requirements, Huawei presents the OptiX OSN 9800 product series. The OptiX OSN 9800 product series include the OptiX OSN 9800 U64, U32, P18 and universal platform subracks. Applied at...
-
【FAQ】 Reason why OSN 9800 has no complete HedEx package like other WDM products
Based on a customer demand survey and analysis and according to five user roles divided by customer work responsibilities and project phases, the following HedEx documents are provided for OSN 9800: -OptiX OSN 9800 Planning Your Network -Op...
-
【FAQ】 Product series of the WDM product family
Huawei WDM/OTN series end-to-end intelligent optical transport platforms are applicable to the backbone core layer, metro core layer, metro convergence layer, and metro edge access layer. These series platforms support universal switching a...
-
【FAQ】 Cabinets for installing OptiX OSN 9800 U64 subracks
The OptiX OSN 9800 U64 subrack is integrated in a cabinet, which has the same dimensions as an N66B cabinet. It cannot be installed in other cabinets.
-
【FAQ】 Differences of the dimensions between OptiX OSN 9800 U64 and U32 subracks
The U64 subrack is integrated in a cabinet and is as high as an N66B cabinet. The U32 subrack is an independent subrack and is as high as the U64 subrack after being installed in a cabinet. The U64 subrack has a depth of 600 mm and has the...
-
【FAQ】 Whether system control boards are required when NG WDM devices are used as slave subracks
1. OSN 8800 subracks are classified into T16, T32, T64, platform subracks, and universal platform subracks (UPSs). Principles for configuring system control boards on OptiX OSN 8800 T16 subracks: For electrical subracks, TN16XCH or TN16UXC...
-
【FAQ】 Whether there are risks when the DCN gateway of OptiX OSN 9800 is switched
When the DCN gateway is switched, the network is normal and services will not be interrupted. However, the NE monitoring function may be affected.
-
【FAQ】 Whether the N402 board and the T302 board on OptiX OSN 9800 support IEEE 1588v2
The N402 board and the T302 board do not support IEEE 1588v2.
Filter by Time
Filter by Time
Did not find what you were looking for?
Search on support.huawei.com
Contact Us: e_online@huawei.com Copyright © 2022 Huawei Technologies Co., Ltd. All rights reserved.
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.