Results: Found related users 0, related groups 0, related topics 112, related cases 9, related FAQ 10
-
【Knowledge Base】 Boards are displayed in slashes on the NE panel and cannot be selected.
The WDM device is OptiX OSN 9800 M12.
2021-12-02 Knowledge Base
-
【Knowledge Base】 Unused channels are scanned due to the version of the OPM8 firmware
OSN 9800 M24 The customer uses the OPM8 board to scan unused channels.195.9 The firmware version of the OPM module is too early.
2022-02-16 Knowledge Base
-
【Knowledge Base】 RAU201 Low Gain
About RAU2 ( OSN 9800 ) reported alarm ,RPC (BWS1600) not reported ,because the RAU2 board has higher requirements on fiber quality. solution is to solve the optical...
2021-07-30 Knowledge Base
-
【Knowledge Base】 Not able to bring new NE in to existing ASON Domain
On existing NE (NE-5) , slot 11 port 1 and port 2 is facing HW-M24-20 For the 2 new 9800 ...Therefore, for the existing NE, the port that facing to 9800 M24 also need changed...
2022-03-17 Knowledge Base
-
【Knowledge Base】 FAQ：15分钟性能值有光为何单板光功率管理显示-60
某据点一块 OSN 9800 设备的S7N402单板接收光功率显示-60，但是查询15分钟性能值有数值 当前光功率显示： 查询当前15分钟性能值： R_LOS告警 实际激光机输入光功率最近值不在正常范围内，单波未调整，物理尾纤异常等导致，输入的信号光异常，读出来的光功率管理显示为-60 1：单板，光口故障，两个光口同时坏的可能性非常小...
2021-08-23 Knowledge Base
-
【Knowledge Base】 The OD fails to be created when the G2HSC1 board is used as the optical monitoring board.
All devices are OSN 9800 M12, the NCE-T version is R20C10SPC300.
2021-12-25 Knowledge Base
-
【Knowledge Base】 RAMAN amplifier is not working
Customer complain that their RAMAN is not working. After further checking, found that customer removed the RAMAN board and cannot delete the unused IPA configuration 1: contact the...
2021-12-30 Knowledge Base
-
【Knowledge Base】 NE_COMMU_BREAK, NE_NOT_LOGIN, GNE_CONNECT_FAIL alarms were reported on GNE and the GNE is unmanageable from NMS.
Customer reported the NE which is also a GNE was unmanageable from NMS.Query and configuration operation cannot be done at this state.Connection between NE and U2000 server is interrupted...
2021-09-15 Knowledge Base
-
【Knowledge Base】 OD report OA_OUT_PWR_ABN alarm
FSE delete 2 wavelength, adjust the optical power to nominal value. the OD still reported OA_OUT_PWR_ABN alarm OA_OUT_PWR_ABN alarm the wavelength monitoring status is incorrectly...
2021-06-29 Knowledge Base
Filter by Time
Did not find what you were looking for?
Search on support.huawei.com
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.