Results: Found related users 0, related groups 0, related topics 112, related cases 31, related FAQ 10
-
【Knowledge Base】 BUS_ERR & HARD_ERR alarm on Huawei OSN 9800
Customer is using U2000 V200R017C60SPC200 and having BUS_ERR & HARD_ERR alarm in OSN 9800 The "working mode" at all those 30 ports were configured with "ODU0 non-convergence...
2019-03-19 Knowledge Base
-
【Knowledge Base】 Calculating the power consumption OSN 9800 boards
Local engineer required help in order to calculate the power consumption of the following boards of OSN 9800 : - 2X CTU board - 7xUXCS - 2X G404 - 2X G220 According...
2018-12-20 Knowledge Base
-
【Knowledge Base】 Problem to collect opical power information from OSN 1800 V NEs after U2000 upgrade
Customer reports that after U2000 NMS V200R016C60CP2025 upgrade it’s no longer possible to...For other OSN devices ( OSN 9800 , OSN 1800 I and OSN ...
2018-10-29 Knowledge Base
-
【Knowledge Base】 OSN 9800 - Board deletion not possible
Removed one 100G Pipe from TX network between nodeA and nodeB We moved all WDM-Trails away from this path.Then, we deactivated and deleted OTU4 / OCH Then we removed all logical fibers...
2018-08-28 Knowledge Base
-
【Knowledge Base】 Unable to check RMON performance in Huawei OSN 9800
1.The version of U2000 is V2R16C60C00SPC200. 2.The version of OSN 9800 of V1R3C00 3.customer unable to check RMON performance in Huawei OSN 9800 ...
2017-12-07 Knowledge Base
-
【Knowledge Base】 when upload NE version software to an OSN 9800 occur error:certain file of the software is missing
when upload NE version software to an OSN 9800 occur error:certain file of the software is missing 1、error:certain file of the software is missing； 2、the error indicate...
2017-10-20 Knowledge Base
-
【Knowledge Base】 an OSN 9800 78-CTU report bd_status in U2000 side but can not find in NE side after upgrade
an OSN 9800 78-CTU report bd_status in U2000 side but can not find in NE side after upgrade from source version V1R1C20SPC360 to target version V100R003C10SPC200 an...
2017-10-20 Knowledge Base
-
【Knowledge Base】 error code 0x9767, BDRSP_HARD_NOPERMIT is prompted when loading the CPLD of the EFI board of the OSN 9600
error code 0x9767, BDRSP_HARD_NOPERMIT is prompted when loading the CPLD of the EFI board of the OSN 9800 ： error code 0x9767, BDRSP_HARD_NOPERMIT CPLD upgrade instructions...
2017-11-28 Knowledge Base
-
【Knowledge Base】 Laser Module Mismatch
OptiX OSN 9800 U64, Board Y2G210 at slor 1,2 with the same optical module and 17-29 slot Y1L402 having the same optical modules are having the alarm LASER_MODULE_MISMATCH...
2018-01-11 Knowledge Base
-
【Knowledge Base】 The configuration procedure to migrate smoothly non-protection service to SNCP service for 10GE LAN service type
OptiX OSN 9800 Version:V100R003C10SPC200; iManager U2000 Version:V200R016C50SPC200; For topology, please refer to the attachment.
2017-01-14 Knowledge Base
Filter by Time
Did not find what you were looking for?
Search on support.huawei.com
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.