Results: Found related users 0, related groups 0, related topics 23, related cases 7, related FAQ 0
-
【Knowledge Base】 OTUCN_LOF alarm on OSN902 for 200G lambda
The customer is deploying 200G service with OSN902 + Optix OSN 9800 optical Layer...Note: The topology only shows the electrical line sites and the Relay site, the optical...
2020-07-24 Knowledge Base
-
【Knowledge Base】 NE Healthcheck for OSN902
NE Healthcheck for OSN902 is needed prior to SW upgrade 1.
2019-06-10 Knowledge Base
-
【Knowledge Base】 The reason why OSN90 restarted twice
We used Navigator to check the logs on the OSN902 ....So, the OSN902 power consumption is much bigger that for OSN1800, almost 20 times more.
2019-12-10 Knowledge Base
-
【Knowledge Base】 OSN902 Timeslot exceed the limit Error code 41992
The target services that had to be created based on the solution design was as follow: Board: M201 Optical Port speed: 200G_16QAM Client port C3 - 40G Client port C4 - 40G Client port...
2019-05-22 Knowledge Base
-
【Knowledge Base】 U2000 software issue
A site reported that the OPU2_CSF alarm suppression on the OSN902 device was unsuccessful...NE version： OSN902 R1C00SSPC200 U2000 version：U2000 R16C60SPC200/R17C60SPC200 （...
2019-07-05 Knowledge Base
-
【Knowledge Base】 How to configure NTP on OSN 902 to use an external IP as NTP source
In order to configure NTP to use an external IP as source you should: 1.Enable the NTP service : ntp-service enable 2.Configuring the IP Address of the Server: ntp-service unicast-server...
2019-08-29 Knowledge Base
-
【Knowledge Base】 OSN902 can't be discovered by U2000
Customer is trying to add two OSN902 devices in U2000....The customer need to ensure a good communication between U2000 server and OSN902 .
2018-05-20 Knowledge Base
Filter by Time
Did not find what you were looking for?
Search on support.huawei.com
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.