Huawei Enterprise Support Community

Results: Found related users 0, related groups 0, related topics 241, related cases 69, related FAQ 58

All User Group Post Case FAQ

Product highlights of OSN 1800 II Enhanced

This post will share you the product highlights of OSN 1800 II Enhanced. 1....◾The OSN 1800 II Enhanced supports universal line boards, allowing services...

2020-12-28

yjhd - Transmission Network

219 2
Product highlights of OSN 1800 I Enhanced

This post will share you the product highlights of OSN 1800 I Enhanced. 1.

2020-12-28

yjhd - Transmission Network

180 0
A case about the OSN 1800 logic board

This time I will share with you a case about the OSN 1800 logic board not...Problem description: The OSN 1800 OADM subrack cannot be started or monitored.

2019-12-12

liqiang185 - Transmission Network

599 6
Performance specifications of DCM module for OptiX OSN 1800

In this post, I would like to share with you the performance specifications of the DCM module...The OptiX OSN 1800 can provide several types of DCMs of several compensation...

2018-12-17

V84083177 - Transmission Network

1235 2
Optix OSN 1800 II Compact and SSH or Telnet

Hi everyone, I have an Optix OSN 1800 II Compact and I don't want use U2000 or WebLCT to configure it.

2017-11-16

thylds - Transmission Network

2230 2
Maximum MAC address capacity for OSN 1800 + ERP

OSN 1800II-E and OSN 1800V have Z7EG10 and Z8EX4 boards....The NCE has the version V100R019C00SPC603 The NE version of the OSN 1800 ...

2022-4-5

Lechero - Transmission Network

177 4
OSN 1800 failed to connect to the storage switch

Set the external loopback on the TX1 / RX1 port of the ELOM board of the OSN 1800 ...Combined with the L_SYNC alarm reported by OSN 1800 , it was determined...

2019-11-29

liqiang185 - Transmission Network

386 3
Can't login issue during commissioning the OSN 1800 subrack

Problem Description A site have three subrack to be installed, when engineer connected to...Enter the following commands: :cfg-add-shelf:1,2U :cfg-add-shelf:2,2U :cfg-add-shelf:3,2U...

2020-12-31

13688012382 - Transmission Network

255 0
How to create a tributary SNCP protection on a OSN 1800

useful info regarding SNCP protection on a OSN 1800 ...

2018-6-26

AlexandruS - Transmission Network

830 4
is it switching time different between OSN 1800 II and ISN 1800 V ?

is it switching time different between OSN 1800 II and ISN 1800 V ?

2020-5-3

Liangry - Singapore Technical Discussion Group

211 1

 1 2 345 6 ···25 

【Knowledge Base】 COM_EXTECC_FULL alarm analysis on OSN 1800

There is the COM_EXTECC_FULL alarm on OSN 1800 device.

2022-01-20 Knowledge Base
【Knowledge Base】 TMB1LTX is not recognized in the OSN 1800 Compact II

Was reported once add the TMB1LTX in the Optix OSN 1800 II in the slot 4...There is no abnormality in the TMB1LTX, NCE-T V100R019C00SPC60 doesn't support this board...

2021-09-13 Knowledge Base
【Knowledge Base】 An OptiX OSN 1800 Slave Subrack Is Unreachable During the Change of a Slave Subrack to a Master Subrack

An OptiX OSN 1800 II NE on a township WDM NE of a carrier consists of subracks 0 and 1....An OptiX OSN 8800 and OptiX OSN 1800 are connected to the unreachable...

2021-07-01 Knowledge Base
【Knowledge Base】 WEBLCT can't login to OSN 1800

When the engineer try to login to Optix OSN 1800 through weblct, a message is displayed."...

2020-10-29 Knowledge Base
【Knowledge Base】 OSN 1800 failed to connect to the storage switch

Set the external loopback on the TX1 / RX1 port of the ELOM board of the OSN 1800 ...Combined with the L_SYNC alarm reported by OSN 1800 , it was determined...

2019-12-29 Knowledge Base
【Knowledge Base】 Cannot add TMB1EGS4 board in the OSN 1800V by iManager U2000 LCT

Cannot create the TMB1EGS4 board in the OSN 1800 V, using iManager U2000 LCT....The U2000 LCT R18 cannot support the current OSN 1800 R19C10 version,...

2021-08-24 Knowledge Base
【Knowledge Base】 V.24 9.6kbps service not through

Alarm Information No Alarm Handling Process In this case, V.24 goes to OSN 1800 ...Setting in SCADA: Setting in OSN 1800 for DXM port service In this case...

2021-12-14 Knowledge Base
【Knowledge Base】 cant Create Virtual STM64 on UNQ2

cant Create Virtual STM64 on UNQ2 As confirmed that on OSN 1800 the UNQ2...And on the E6608 insert into slot-5/6 it’s can support only 1*STM-64 if insert into slot...

2021-08-10 Knowledge Base
【Knowledge Base】 Omnisight License control the Features of OSN 1800

Omnisight License control the Features of OSN 1800 ...

2019-11-15 Knowledge Base
【Knowledge Base】 Boards in the Z5SCC Subrack Report BD_STATUS Alarms Due to Incorrect Detection of 2K Signals on the SCC Board

Multiple Boards on the OptiX OSN 1800 Report the BD_STATUS Alarm at the Same Time Due to a known software defect, the active and standby SCC boards in the slave subrack...

2021-07-01 Knowledge Base

 12 3 4 5 6 ···7 

Filter by Time

Did not find what you were looking for?

Search on support.huawei.com

Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.

Please bind your phone number to obtain invitation bonus.

Post More>

Case More>

【Knowledge Base】 COM_EXTECC_FULL alarm analysis on OSN 1800

【Knowledge Base】 TMB1LTX is not recognized in the OSN 1800 Compact II

【Knowledge Base】 An OptiX OSN 1800 Slave Subrack Is Unreachable During the Change of a Slave Subrack to a Master Subrack

【Knowledge Base】 WEBLCT can't login to OSN 1800

【Knowledge Base】 OSN 1800 failed to connect to the storage switch

FAQ More>

【FAQ】 Method used to test GE services provisioned when the OSN 8800 TOA board is interconnected with the OSN 1800 ELOM board

【FAQ】 Whether the OSN 1800 I and OSN 1800 II can be connected to cabinet indicators

【FAQ】 Maximum power consumption of fully configured OSN 1800 I and OSN 1800 II subracks

【FAQ】 Whether an OSN 1800 can communicate with an SDH device through the extended ECC

【FAQ】 Whether an HUNQ2 board on an OSN 1800 supports ODU0 cross-connections

【Knowledge Base】 COM_EXTECC_FULL alarm analysis on OSN 1800

【Knowledge Base】 TMB1LTX is not recognized in the OSN 1800 Compact II

【Knowledge Base】 An OptiX OSN 1800 Slave Subrack Is Unreachable During the Change of a Slave Subrack to a Master Subrack

【Knowledge Base】 WEBLCT can't login to OSN 1800

【Knowledge Base】 OSN 1800 failed to connect to the storage switch

【Knowledge Base】 Cannot add TMB1EGS4 board in the OSN 1800V by iManager U2000 LCT

【Knowledge Base】 V.24 9.6kbps service not through

【Knowledge Base】 cant Create Virtual STM64 on UNQ2

【Knowledge Base】 Omnisight License control the Features of OSN 1800

【Knowledge Base】 Boards in the Z5SCC Subrack Report BD_STATUS Alarms Due to Incorrect Detection of 2K Signals on the SCC Board

【FAQ】 Method used to test GE services provisioned when the OSN 8800 TOA board is interconnected with the OSN 1800 ELOM board

【FAQ】 Whether the OSN 1800 I and OSN 1800 II can be connected to cabinet indicators

【FAQ】 Maximum power consumption of fully configured OSN 1800 I and OSN 1800 II subracks

【FAQ】 Whether an OSN 1800 can communicate with an SDH device through the extended ECC

【FAQ】 Whether an HUNQ2 board on an OSN 1800 supports ODU0 cross-connections

【FAQ】 Whether the built-in VOA on an OBU board of an OSN 1800 needs to be independently applied for

【FAQ】 Whether an LEM18 board on an OSN 1800 supports link aggregation

【FAQ】 Whether an OSN 1800 has boards that support STM-64 services

【FAQ】 Whether the client side of an LWX2 board on OSN 1800 supports STM-4 (662 Mbit/s) SDH services

【FAQ】 NMS monitoring for multiple OSN 1800 devices at the same site.

Filter by Time

Filter by Time

Did not find what you were looking for?