Search

Huawei Enterprise Support Community

Results: Found related users 0, related groups 0, related topics 241, related cases 69, related FAQ 58

All User Group Post Case FAQ

Boards not visible in NCE

NCE V100R019C00SPC601 does not support OptiX OSN 1800 II TP - V100R019C10SPC700 management.

2021-6-14

IA5991 - Transmission Network

374 4
Is there a replacement for the Optix Metro 800?

Metro800 is an old WDM equipment, current mainstream WDM equipment is OSN serial... OSN serial WDM equipment has OSN 1800 / OSN 6800/ OSN ...

2019-2-18

CZQCHAI - Transmission Network

771 2
DWDM/OTN book (basic to expert level)

For ONT products, you can learn the user manual of OSN 1800 , OSN 8800, and OSN 9800 devices....If you don't have enough time, it is recommended to only study OSN

2021-9-5

fazy - Transmission Network

510 6

MPLS planning documents

Hi Gents, We have a project in egypt that we will use OSN 1800 as OTN device to transport MPLS TP traffic.

2020-10-11

Samir_Egypt - Transmission Network

394 4

Configuring the EGS4 by WebLCT

You can check the link for OSN 1800 Configuration and CommissioningGuide. https://support.huawei.com/enterprise/my/doc/EDOC1100127784/5ba97f9b/configuration-tasks...

2021-3-19

user_3958443 - Transmission Network

448 2

Cannot delete the F1EX40 card

I'm trying to delete two F1EX40 cards in slots 5 and 7 on the OSN 1800 II but I receive the following message in the NCE: The board are used by fiber connection management.

2021-8-25

user_3958443 - Transmission Network

258 2

MODULE_NOT_AUTHENTICATE

NCE-T: V1R19C00SPC602 OSN 1800 V pro: V1R19C10SPC700+SPH701 The device is reporting the alarm "MODULE_NOT_AUTHENTICATE", but NCE-T alarm list is not reporting this alarm.

2021-6-8

IA5991 - Transmission Network

315 3

Outdoor GE Aggregator Project

The OSN 1800 is located between PE router & MSAN equipment to provide internet...HLD: Configuration: Link Aggregation Group (LAG) for Uplink: ELAN Service for Downlink:...

2019-8-29

fadrul - Transmission Network

2651 12

Error during OCH trail creation

NMS : NCE - T Lite V100R019C00SPC500 Device : V100R009C00SPC500 OSN 1800 II V100R007C00SPC700 OSN 9800 UPS V100R009C00SPC500 OSN 1800 V...

2020-2-28

fadrul - Transmission Network

437 0

The basic functions of the OLP board

Hello Wassim OLP: Optical Line Protection Board For the OSN 1800I/II compact, the...For the OSN 1800 V and 1800 II Enhanced, the OLP board can implement...

2020-2-6

Wassim - Transmission Network

429 2

 1 ···14 151617 18 ···25 

【Knowledge Base】 COM_EXTECC_FULL alarm analysis on OSN 1800

There is the COM_EXTECC_FULL alarm on OSN 1800 device.

2022-01-20    Knowledge Base

【Knowledge Base】 TMB1LTX is not recognized in the OSN 1800 Compact II

Was reported once add the TMB1LTX in the Optix OSN 1800 II in the slot 4...There is no abnormality in the TMB1LTX, NCE-T V100R019C00SPC60 doesn't support this board...

2021-09-13    Knowledge Base

【Knowledge Base】 An OptiX OSN 1800 Slave Subrack Is Unreachable During the Change of a Slave Subrack to a Master Subrack

An OptiX OSN 1800 II NE on a township WDM NE of a carrier consists of subracks 0 and 1....An OptiX OSN 8800 and OptiX OSN 1800 are connected to the unreachable...

2021-07-01    Knowledge Base

【Knowledge Base】 WEBLCT can't login to OSN 1800

When the engineer try to login to Optix OSN 1800 through weblct, a message is displayed."...

2020-10-29    Knowledge Base

【Knowledge Base】 OSN 1800 failed to connect to the storage switch

Set the external loopback on the TX1 / RX1 port of the ELOM board of the OSN 1800 ...Combined with the L_SYNC alarm reported by OSN 1800 , it was determined...

2019-12-29    Knowledge Base

【Knowledge Base】 Cannot add TMB1EGS4 board in the OSN 1800V by iManager U2000 LCT

Cannot create the TMB1EGS4 board in the OSN 1800 V, using iManager U2000 LCT....The U2000 LCT R18 cannot support the current OSN 1800 R19C10 version,...

2021-08-24    Knowledge Base

【Knowledge Base】 V.24 9.6kbps service not through

Alarm Information No Alarm Handling Process In this case, V.24 goes to OSN 1800 ...Setting in SCADA: Setting in OSN 1800 for DXM port service In this case...

2021-12-14    Knowledge Base

【Knowledge Base】 cant Create Virtual STM64 on UNQ2

cant Create Virtual STM64 on UNQ2 As confirmed that on OSN 1800 the UNQ2...And on the E6608 insert into slot-5/6 it’s can support only 1*STM-64 if insert into slot...

2021-08-10    Knowledge Base

【Knowledge Base】 Omnisight License control the Features of OSN 1800

Omnisight License control the Features of OSN 1800 ...

2019-11-15    Knowledge Base

【Knowledge Base】 Boards in the Z5SCC Subrack Report BD_STATUS Alarms Due to Incorrect Detection of 2K Signals on the SCC Board

Multiple Boards on the OptiX OSN 1800 Report the BD_STATUS Alarm at the Same Time Due to a known software defect, the active and standby SCC boards in the slave subrack...

2021-07-01    Knowledge Base

 12 3 4 5 6 ···7 

【FAQ】 Method used to test GE services provisioned when the OSN 8800 TOA board is interconnected with the OSN 1800 ELOM board

The TOA board supports Ethernet test frames for GE services but does not support the PRBS function for GE services. The ELOM board, in the contrary, does not support GE test frames. Therefore, you can only test the GE services by performing...

FAQ - Transport&Access Network

【FAQ】 Whether the OSN 1800 I and OSN 1800 II can be connected to cabinet indicators

The OSN 1800 I and OSN 1800 II do not provide ports for connecting to cabinet alarm indicators.

FAQ - Transport&Access Network

【FAQ】 Maximum power consumption of fully configured OSN 1800 I and OSN 1800 II subracks

The maximum power consumption of an OSN 1800 I subrack and that of an OSN 1800 II subrack are 150 W and 300 W respectively.

FAQ - Transport&Access Network

【FAQ】 Whether an OSN 1800 can communicate with an SDH device through the extended ECC

An OSN 1800 can communicate with an SDH device through the extended ECC.

FAQ - Transport&Access Network

【FAQ】 Whether an HUNQ2 board on an OSN 1800 supports ODU0 cross-connections

An HUNQ2 board supports ODU0 cross-connections, and can work with cross-connect boards to implement the following service scheduling: 32 x ODU0/16 x ODU1/32 x ODUflex/4 x ODU2/4 x ODU2e

FAQ - Transport&Access Network

【FAQ】 Whether the built-in VOA on an OBU board of an OSN 1800 needs to be independently applied for

An independent application is required, and the BOM number of the VOA is 45030056.

FAQ - Transport&Access Network

【FAQ】 Whether an LEM18 board on an OSN 1800 supports link aggregation

An LEM18 board on an OSN 1800 supports manual and static aggregation, load sharing, and non-load sharing.

FAQ - Transport&Access Network

【FAQ】 Whether an OSN 1800 has boards that support STM-64 services

The LSX and LDX boards on an OSN 1800 support STM-64 services.

FAQ - Transport&Access Network

【FAQ】 Whether the client side of an LWX2 board on OSN 1800 supports STM-4 (662 Mbit/s) SDH services

The client side of an LWX2 board on OSN 1800 supports STM-4 (662 Mbit/s) SDH services.

FAQ - Transport&Access Network

【FAQ】 NMS monitoring for multiple OSN 1800 devices at the same site.

1. CO NEs can be set as gateway NEs. 2. ECC can be manually extended on OSN1800, or extended using other OTN or SDH devices in the equipment room. 3. RM and TM ports are interconnected in OSC mode. 4. Subracks work in master-slave mod...

FAQ - Transport&Access Network

 12 3 4 5 6 

Filter by Time

No

Within a day

Within a week

Within a month

Within a year

Filter by Time

No

Within a day

Within a week

Within a month

Within a year

Did not find what you were looking for?

Search on support.huawei.com

Login and enjoy all the member benefits
Login

Huawei Website Support About Huawei Privacy User Agreement Terms of Use Cookies Cookie Settings

Huawei Enterprise Huawei Carrier Forum Training & Certification

Contact Us: e_online@huawei.com Copyright © 2022 Huawei Technologies Co., Ltd. All rights reserved.

Block

Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.

Reminder

Please bind your phone number to obtain invitation bonus.

Post More>

Case More>

【Knowledge Base】 COM_EXTECC_FULL alarm analysis on OSN 1800

【Knowledge Base】 TMB1LTX is not recognized in the OSN 1800 Compact II

【Knowledge Base】 An OptiX OSN 1800 Slave Subrack Is Unreachable During the Change of a Slave Subrack to a Master Subrack

【Knowledge Base】 WEBLCT can't login to OSN 1800

【Knowledge Base】 OSN 1800 failed to connect to the storage switch

FAQ More>

【FAQ】 Method used to test GE services provisioned when the OSN 8800 TOA board is interconnected with the OSN 1800 ELOM board

【FAQ】 Whether the OSN 1800 I and OSN 1800 II can be connected to cabinet indicators

【FAQ】 Maximum power consumption of fully configured OSN 1800 I and OSN 1800 II subracks

【FAQ】 Whether an OSN 1800 can communicate with an SDH device through the extended ECC

【FAQ】 Whether an HUNQ2 board on an OSN 1800 supports ODU0 cross-connections

【Knowledge Base】 COM_EXTECC_FULL alarm analysis on OSN 1800

【Knowledge Base】 TMB1LTX is not recognized in the OSN 1800 Compact II

【Knowledge Base】 An OptiX OSN 1800 Slave Subrack Is Unreachable During the Change of a Slave Subrack to a Master Subrack

【Knowledge Base】 WEBLCT can't login to OSN 1800

【Knowledge Base】 OSN 1800 failed to connect to the storage switch

【Knowledge Base】 Cannot add TMB1EGS4 board in the OSN 1800V by iManager U2000 LCT

【Knowledge Base】 V.24 9.6kbps service not through

【Knowledge Base】 cant Create Virtual STM64 on UNQ2

【Knowledge Base】 Omnisight License control the Features of OSN 1800

【Knowledge Base】 Boards in the Z5SCC Subrack Report BD_STATUS Alarms Due to Incorrect Detection of 2K Signals on the SCC Board

【FAQ】 Method used to test GE services provisioned when the OSN 8800 TOA board is interconnected with the OSN 1800 ELOM board

【FAQ】 Whether the OSN 1800 I and OSN 1800 II can be connected to cabinet indicators

【FAQ】 Maximum power consumption of fully configured OSN 1800 I and OSN 1800 II subracks

【FAQ】 Whether an OSN 1800 can communicate with an SDH device through the extended ECC

【FAQ】 Whether an HUNQ2 board on an OSN 1800 supports ODU0 cross-connections

【FAQ】 Whether the built-in VOA on an OBU board of an OSN 1800 needs to be independently applied for

【FAQ】 Whether an LEM18 board on an OSN 1800 supports link aggregation

【FAQ】 Whether an OSN 1800 has boards that support STM-64 services

【FAQ】 Whether the client side of an LWX2 board on OSN 1800 supports STM-4 (662 Mbit/s) SDH services

【FAQ】 NMS monitoring for multiple OSN 1800 devices at the same site.

Filter by Time

Filter by Time

Did not find what you were looking for?