Results: Found related users 0, related groups 0, related topics 241, related cases 69, related FAQ 58
-
【FAQ】 NMS monitoring for multiple OSN 1800 devices at the same site
All NEs at a site can be set to gateway NEs. Three inter-NE communication modes are supported: Manual extended ECC mode: In this mode, extended ECC can be performed between OSN 1800 devices or between an OSN 1800 device and another OTN or ...
-
【FAQ】 Board mode selection for an ELOM board on OSN 1800 when GE services are enabled for the board
In the NE Explorer, select the F2ELOM(STND) board. In the navigation tree, choose Configuration > Working Mode, and set Board Working Mode to 1*AP8 general mode.
-
【FAQ】 Changing OSN 1800 independent subracks to master/slave subracks
Associating a logical master subrack with a physical subrack: After creating an NE on the NMS and uploading NE data, associate the logical master subrack with a physical subrack. Adding logical slave subracks: Based on the ID information of...
-
【FAQ】 Maximum power consumption of fully configured OSN 1800 I or II subracks
The maximum power consumption of an OSN 1800 I subrack and that of an OSN 1800 II subrack are 150 W and 300 W respectively.
-
【FAQ】 Modification of the port working mode on OSN 6800 and OSN 1800
Verify that the service type is GE (GFP-T). The working mode does not need to be configured, and switches at both ends simply need to have the same working mode.
-
【FAQ】 Connection between an OSN 1800 II subrack and an OADM frame of OSN 1800
A straight-through network cable can be used to connect the OCTL ports of OSN 1800 and OSN 1800 II to supply power to OADM frames and manage them.
-
【FAQ】 Whether an optical module whose wavelength is 1511 nm can be configured on the TM/RM port of the SCC board on OSN 1800
An optical module whose wavelength is 1511 nm can be configured for the TM/RM port of the SCC board on OSN 1800. However, OSN 1800 board supports CWDM. A conflict occurs between the 1511 nm supervisory wavelength and the 1511 nm service wav...
-
【FAQ】 Whether the FIU board on OSN 1800 supports optical power detection
The TNF2FIU board on OSN 1800 V1R5C00SPC200 supports optical power detection.
-
【FAQ】 Whether the LEM18 board on OSN 1800 supports link aggregation
The LEM18 board on OSN 1800 supports manual aggregation and static aggregation and load sharing and non-load sharing.
-
【FAQ】 Whether OSN 1800 has boards that support STM-64 services
The LSX and LDX boards on OSN 1800 support STM-64 services.
Did not find what you were looking for?
Search on support.huawei.com
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.