Results: Found related users 0, related groups 0, related topics 241, related cases 69, related FAQ 58
-
【FAQ】 Design principles for OSN 1800 master/slave subrack planning
In the case of OptiX OSN 1800, one master subrack can manage a maximum of six slave subracks. The ID of the slave subrack that connects to the input and output optical ports RM2/TM2 of the OSC in the master subrack must be 1. In the network...
-
【FAQ】 FIT and MTBF specifications of boards on OSN 1800
Failures in time (FIT) and mean time between failures (MTBF) are inherent performance counters of board hardware. They are related to the board chip quality and running environment. The following lists the parameters for typical boards of O...
-
【FAQ】 Boards that support FC1200, FC800, and FC400 services on OSN 1800 and OSN 6800
On OSN 1800 devices, the LDX and ELOM boards support FC1200 and FC800 services, and the ELOM board supports FC400 service. On OSN 6800 devices, the LOA, LSX, TDX, TQX, and TN17LTX boards support FC1200 service, the LOA, TDX, TQX, and TN17LT...
-
【FAQ】 Command for changing the IP address of an OSN 1800 NE
To set the IP address of an OSN 1800 NE, run the cm-set-ip command.
-
【FAQ】 Maximum power consumption of OSN 1800 devices
OSN 1800 II DC chassis: 300 W; AC chassis: 200 W.
-
【FAQ】 Dispersion compensation rules for OSN 1800 devices
1. Based on the specific fiber type, a DCM module is configured at the transmit end of the OTM site to make a precompensation of 20 km. 2. 100% compensation is performed for line dispersion using the DCM module that is selected based on th...
-
【FAQ】 Insertion loss of the MR8 board on OSN 1800 devices
The insertion loss of the wavelength-adding channels on the MR8 board of OSN 1800 devices is within 4.0 dB.
-
【FAQ】 Method for communication between the NMS and OSN 1800 through OSN 6800
On the DCC Management page, the OSN 6800 port corresponding to OSN 1800 needs to be deleted before OSN 1800 can be managed on the NMS. The operation procedure is as follows: Select the OSN 6800 device, and click DCC Management in the Functi...
-
【FAQ】 Optical supervisory wavelength for the SCC board on OSN 1800
The 1310 nm wavelength can be used by the OSC port of an SCC board on OSN 1800.
-
【FAQ】 MD8S board insertion in an OSN 1800 II subrack
An OSN 1800 II subrack can house a maximum of MD8S boards in slots 1�?.
Did not find what you were looking for?
Search on support.huawei.com
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.