Results: Found related users 0, related groups 0, related topics 241, related cases 69, related FAQ 58
-
【FAQ】 Methods for modifying the port working mode of OptiX OSN 6800 and OptiX OSN 1800
If the queried configuration service type is GE (GFP-T), the working mode does not need to be configured, and switches at both ends must be in the same working mode.
-
【FAQ】 Whether an optical module whose wavelength is 1511 nm can be configured on the TM/RM port of the SCC board on an OSN 1800
The SCC board on an OSN 1800 needs to use an optical module whose wavelength is 1310 nm.
-
【FAQ】 Whether an FIU board on an OSN 1800 supports optical power detection
A TNF2FIU board on OSN 1800 V100R005C00SPC200 supports optical power detection.
-
【FAQ】 Command for changing NE IP addresses of OSN 1800 devices
The cm-set-ip command can set NE IP addresses.
-
【FAQ】 Maximum power consumption of OSN 1800 devices?
The maximum power consumption of OSN 1800 II is 300 W.
-
【FAQ】 Dispersion compensation rules for OSN 1800 devices?
1. A 20 km DCM module is pre-compensated at the transmit end of the OTM based on the fiber type. 2. The compensation module is chosen based on the fiber type to implement 100% dispersion compensation. In addition, the dispersion topology is...
-
【FAQ】 Insertion loss of wavelength-adding channels of the MR8 board on OSN 1800
The insertion loss of wavelength-adding channels of the MR8 board on OSN 1800 is less than or equal to 4.0 dB.
-
【FAQ】 Products included in OTN equipment
Currently, Huawei OTN devices include OSN 1800, OSN 3800, OSN 6800, OSN 8800, and OSN 9800.
-
【FAQ】 Product series of the WDM product family
Huawei WDM/OTN series end-to-end intelligent optical transport platforms are applicable to the backbone core layer, metro core layer, metro convergence layer, and metro edge access layer. These series platforms support universal switching a...
-
【FAQ】 Command used to configure the TNF1OBU board on OSN 1800 to forcibly emit light
Question: During the on-site deployment of OSN 1800, the TNF1OBU board is needed to forcibly emit wide-spectrum light to test the channel attenuation of the X40 board. However, the NE whose version is 5.67.3.29 does not support the cfg-set-...
Did not find what you were looking for?
Search on support.huawei.com
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.