Results: Found related users 0, related groups 0, related topics 241, related cases 69, related FAQ 58
-
【FAQ】 Precautions for physical connections of the MCA board during the project design
Question: What are the precautions for physical connections of the MCA board in project design? Analysis: None Root cause: MCA is a 4- or 8-channel spectrum analyzer that supports functions and features such as optical spectrum analysis, op...
-
【FAQ】 Optical supervisory wavelength used by an SCC board on OSN 1800
Generally, 1310 nm wavelength is used.
-
【FAQ】 Slots for housing MD8S boards in an OSN1800 II subrack
Slots 1 to 7 in an OSN 1800 II subrack can house MD8S boards.
-
【FAQ】 Working mode setting for an ELOM board to receive GE services on OSN 1800
1 x AP8 ODU0 non-aggregation mode can be selected.
-
【FAQ】 Command for deleting logical boards on OSN 1800
:cfg-del-board,:cfg-verify
-
【FAQ】 Application of CWDM boards on OSN 1800
In the case of a CWDM and DWDM hybrid network, the 1531 nm and 1551 nm wavelengths in the CWDM system must be reserved for the expansion to the DWDM system. The optical ports for the 1531 nm and 1551 nm wavelengths can be extended to access...
-
【FAQ】 Connection between an OSN 1800 II subrack and OADM frames of OSN 1800
A straight-through network cable can be used to connect the OCTL ports of OSN 1800 and OSN 1800 II to supply power to OADM frames and manage them.
-
【FAQ】 R_LOS alarm reported on an LWX2 board when its optical module normally receives optical signals
Question: One OSN 1800 NE is used for point-to-point networking at each of sites A and B. According to a hardware loopback test on the client-side and WDM-client optical ports of LWX2 boards at site A, an R_LOS alarm is reported on the NMS....
-
【FAQ】 Methods for restoring services after replacing the system control board on the OptiX OSN 1800
The OptiX OSN 1800 device does not support data downloading. Services can be recovered only by restoring database.
-
【FAQ】 Method used for communication between OSN 1800 and OSN 6800
Question: In a two-level aggregation ring, the optical path between OSN 6800 and OSN 1800 is available. How to use the DCC management function of OSN 6800 to manage OSN 1800 on the NMS? Answer: The channel corresponding to OSN 1800 needs t...
Did not find what you were looking for?
Search on support.huawei.com
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.