Results: Found related users 0, related groups 0, related topics 241, related cases 69, related FAQ 58
-
【FAQ】 Method used to test GE services provisioned when the OSN 8800 TOA board is interconnected with the OSN 1800 ELOM board
The TOA board supports Ethernet test frames for GE services but does not support the PRBS function for GE services. The ELOM board, in the contrary, does not support GE test frames. Therefore, you can only test the GE services by performing...
-
【FAQ】 Whether the OSN 1800 I and OSN 1800 II can be connected to cabinet indicators
The OSN 1800 I and OSN 1800 II do not provide ports for connecting to cabinet alarm indicators.
-
【FAQ】 Maximum power consumption of fully configured OSN 1800 I and OSN 1800 II subracks
The maximum power consumption of an OSN 1800 I subrack and that of an OSN 1800 II subrack are 150 W and 300 W respectively.
-
【FAQ】 Whether an OSN 1800 can communicate with an SDH device through the extended ECC
An OSN 1800 can communicate with an SDH device through the extended ECC.
-
【FAQ】 Whether an HUNQ2 board on an OSN 1800 supports ODU0 cross-connections
An HUNQ2 board supports ODU0 cross-connections, and can work with cross-connect boards to implement the following service scheduling: 32 x ODU0/16 x ODU1/32 x ODUflex/4 x ODU2/4 x ODU2e
-
【FAQ】 Whether the built-in VOA on an OBU board of an OSN 1800 needs to be independently applied for
An independent application is required, and the BOM number of the VOA is 45030056.
-
【FAQ】 Whether an LEM18 board on an OSN 1800 supports link aggregation
An LEM18 board on an OSN 1800 supports manual and static aggregation, load sharing, and non-load sharing.
-
【FAQ】 Whether an OSN 1800 has boards that support STM-64 services
The LSX and LDX boards on an OSN 1800 support STM-64 services.
-
【FAQ】 Whether the client side of an LWX2 board on OSN 1800 supports STM-4 (662 Mbit/s) SDH services
The client side of an LWX2 board on OSN 1800 supports STM-4 (662 Mbit/s) SDH services.
-
【FAQ】 NMS monitoring for multiple OSN 1800 devices at the same site.
1. CO NEs can be set as gateway NEs. 2. ECC can be manually extended on OSN1800, or extended using other OTN or SDH devices in the equipment room. 3. RM and TM ports are interconnected in OSC mode. 4. Subracks work in master-slave mod...
Did not find what you were looking for?
Search on support.huawei.com
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.