Results: Found related users 0, related groups 0, related topics 241, related cases 69, related FAQ 58
-
【Knowledge Base】 How to initiate the SCC database in OSN 1800
In this case I want to introduce how to initiate the SCC database in OSN 1800 ...If you have to replace a SCC unit in OSN 1800 but you do not have a new...
2012-07-25 Knowledge Base
-
【Knowledge Base】 How to find out the IP of SCC on OSN 1800
It happened many times that the field engineer installed a new OSN 1800 NE...It happened many times that the field engineer installed a new OSN 1800 ...
2012-07-25 Knowledge Base
-
【Knowledge Base】 FAQ-How to Configure Cross-Connections Between RX TXs and LP Paths for a TOM Board in Case of Interconnection Between a TOM Board on the OptiX OSN 6800 and an LDGF Board on
Q: A TOM board on an OptiX OSN 6800 NE is interconnected with an LDGF board on an...Null Q: A TOM board on an OptiX OSN 6800 NE is interconnected with an LDGF board...
2012-07-25 Knowledge Base
-
【Knowledge Base】 How to restore the default IP-address of SCC on OSN 1800
If you can not connect to NE because you forget the IP address of this SCC you can use this method for reseting the IP.Null Null The Method for restoring the default IP address is...
2012-07-25 Knowledge Base
-
【Knowledge Base】 FAQ-How to Make the IP Address of the OptiX OSN 1800 Automatically Change Back to the Default Value
Do not press or release the button for too long or too short. Otherwise, the operation fails.
2012-07-25 Knowledge Base
-
【Knowledge Base】 For the DMD2 Board on the OptiX OSN 1800 , the Wavelengths Displayed on the iManager T2000 Conflict with the Nominal Wavelengths (Actual Wavelengths) of the Board
The nominal wavelengths of the DMD2 board on the OptiX OSN 1800 are as follows: eA1/eD1＝wA1/wD1=1471 eA2/eD2＝wA2/wD2=1591 The wavelengths displayed on the iManager...
2012-07-25 Knowledge Base
-
【Knowledge Base】 SFP do not support 2.5G rate cause LWX2 report R-LOC alarm
R-LOC alarm For this problem, it may cause by : 1,the rate of the port set on NMS may be wrong. 2,the SFP dont support this kind of rate. 1,check the rate we set on NMS, for the service...
2012-07-25 Knowledge Base
-
【Knowledge Base】 FAQ-What is different between LPT and ALS and Intelligent fiber functions
A: What are differents between LPT and ALS and Intelligent fiber functions?NO NO Trigger Conditions: ALS:Client side or WDM side of OTU with no optical signal (only Optical Layer...
2012-07-25 Knowledge Base
-
【Knowledge Base】 Why is the optical power measured by EXFO OSA different from that measured by huawei OSA on OPU-MON
The engineer measure the optical power on OPU-MON by 3 different devices: 1、Huawei OSA (-8.37dBm) .the attached file "Huawei OSA.bmp" 2、Optical power meter (-8.4dBm) 3、EXFO OSA (-12.69dBm...
2012-07-25 Knowledge Base
Filter by Time
Did not find what you were looking for?
Search on support.huawei.com
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.