Results: Found related users 0, related groups 0, related topics 241, related cases 69, related FAQ 58
-
【Knowledge Base】 CLK_NO_TRACE_MODE alarms on Optical NE
For OSN 1800 , TSP boards can be used for SDH synchronization & LEM18 boards...As long as the OSN 1800 is just used in Optical layer with MR8, and amplifier...
2020-01-30 Knowledge Base
-
【Knowledge Base】 Problem to collect opical power information from OSN 1800 V NEs after U2000 upgrade
Customer reports that after U2000 NMS V200R016C60CP2025 upgrade it’s no longer possible to...For other OSN devices ( OSN 9800, OSN 1800 I and OSN ...
2018-10-29 Knowledge Base
-
【Knowledge Base】 UNQ2 ETH port cannot up
both end use UNQ2 and create V-port, but report ETH_LINK_DOWN, link route is UNQ2-NO2-NO2 (siteA) NO2-NO2-UNQ2 (siteB) ETH_LINK_DOWN timeslot mode are not consistent 1.Checked the...
2020-08-24 Knowledge Base
-
【Knowledge Base】 How to reset the OSN 1800 I&II IP address to the factory setting
If you don't remember the IP address of the OSN 1800 I&II device, other...If the device is OptiX OSN 1800 I&II compact, you can reset the IP address...
2018-09-18 Knowledge Base
-
【Knowledge Base】 U2000- RMON performance value is above limit
Device type: OSN 1800 II Card type:F2LDX Info from U200: NE Explorer-> Performance-> RMON Performance. service type is SFP10 GB Since the event is still reported,...
2019-08-29 Knowledge Base
-
【Knowledge Base】 Ethernet services in unidirectional communication
Two OSN 1800 devices are connected to each other.
2019-07-26 Knowledge Base
-
【Knowledge Base】 Create a NE including OSN 1800 OADM frame
Customer is using an Optix OSN 1800 device, with the version software V100R007C10SPC300...He wanted to know what is the right procedure to create a NE including a OSN 1800 ...
2018-07-20 Knowledge Base
-
【Knowledge Base】 Check reset logs for OptiX OSN 902 for power reset
Data center experienced power supply issue, but OSN 902 did`t report power alarm....For OptiX OSN 902, slot 7 hosts the SCC board.
2019-06-24 Knowledge Base
-
【Knowledge Base】 Radius authentication for OSN 1800
Which are the parameters and attributes that should be set in Radius Server in order to have...In order to configure radius authentication, Huawei OptiX OSN 1800 should...
2018-06-20 Knowledge Base
-
【Knowledge Base】 Backup Operation failed / OSN 1800 -II
Manual and Automatically back-up operation failed.The error received " Unable to create file".Also "Automatic back-up operation failed" alarm appeared.For this software version,...
2018-08-17 Knowledge Base
Filter by Time
Did not find what you were looking for?
Search on support.huawei.com
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.