Results: Found related users 1313, related groups 0, related topics 396, related cases 322, related FAQ 263
User More>
Post More>
-
LB
Load balancing principle: Many Huawei products use the load balancing technology....To learn more about load balancing , visit the following link: ...
-
Huawei RTN LB Test
Today I would like to share , how make LB test To FE ports on RTN LB Test : With the loopback tester ( LB ) , you can check the bidirectional communication...
2022-1-4
amr_rashedy - Wireless & Microwave
392 14 -
EIP on LB
Hi Cloud Expert Does Elastic IP remains associated with VM instance using Load balancer . 21-3-34...
2021-7-21
BAZ - Cloud & Big Data
307 2 -
website on LB
Hello One of our client at North region has hosted their company website on CLOUD, behind Load Balancer that is configured to handle HTTP and HTTPS separately.
2021-7-27
BAZ - Cloud & Big Data
180 2 -
Which of the following commands is used to create a static load balancing group?
D # Create the static load balancing group and set the start threshold for...[AC-wlan-view] sta- load - balance static-group name wlan-static [AC-wlan-sta...
2022-1-26
simon.waweru - WLAN
162 3
Case More>
-
【Knowledge Base】 Un-Even Load Balance on S6730-H24X6C Switches
facing uneven load balancing issue on Huawei S-6730 Switches. using four...RPR is configured on Eth-Trunk lacp bundle 2 x 100G Ports with 40G QSFP. observing un-even...
2022-03-29 Knowledge Base
-
【Knowledge Base】 LACP load balancing traffic unequally on Access Network with some models of Huawei switch
Currently, only one enhanced load balancing profile can be configured. 2....Because traffic changes continuously, the load balance of the link changes...
2021-12-29 Knowledge Base
-
【Knowledge Base】 Traffic is not getting load shared between the Eth-trunk ports
the eth-trunk port) 【Problem Analysis】 The switch 3 interface not reference load ...Refer load - balance at eth-trunk interface.
2022-03-31 Knowledge Base
-
【Knowledge Base】 Principle of PSU Load Balancing for Server
Principle of PSU Load Balancing for Server Regarding to PSU power load ...When the load greater than 50%, the difference will be within 5%. 3.
2020-12-31 Knowledge Base
-
【Knowledge Base】 LAG load balancing not working properly between NE05E and MA5800x7 OLT
Check if the load - balance profile is the default one or is it changed Notice that the load ...By default, Layer 3 Eth-Trunk interfaces perform load balancing based...
2021-01-28 Knowledge Base
FAQ More>
-
【FAQ】 What should I do if the configured IP phone linkage service cannot take effect?
The IP phone linkage service conflicts with call forwarding unconditional (CFU), call forwarding busy (CFB), call forwarding conditional (CFC), and call transfer to voice mailbox unconditional (CTVMU) services. Cancel the conflicting servic...
-
【FAQ】 What should I do if the configured one number link you (ONLY) service cannot take effect?
The ONLY service conflicts with call forwarding unconditional (CFU) and call transfer to voice mailbox unconditional (CTVMU) services. Cancel the conflicting services or reconfigure the account, and then verify the ONLY service again....
-
【FAQ】 What should I do if the configured simultaneous ringing service cannot take effect?
The simultaneous ringing service conflicts with call forwarding unconditional (CFU), call transfer to voice mailbox unconditional (CTVMU), absence, and do not disturb (DND) services. Cancel the conflicting services or reconfigure the accoun...
-
【FAQ】 How to resolve the issue when the ringback tone cannot be heard when the U1900 unified gateway interworks with a carrier's network?
If the trunk bearer is configured and the ringback tone from the carrier side cannot be heard, check the system settings and set the peerringback parameter to yes. config modify tgld callsourceno officeno protocol prefix [peerringback] p...
-
【FAQ】 Why cannot the ringback tone be heard when the U1930 interworks with a carrier's device
If the trunk bearer is configured, the ringback tone from the carrier side cannot be heard. You need to check system settings and set the peerringback parameter to yes. config modify tgld callsourceno officeno protocol prefix [peerring...
Sorry, no matching result is found.
-
【Knowledge Base】 Un-Even Load Balance on S6730-H24X6C Switches
facing uneven load balancing issue on Huawei S-6730 Switches. using four...RPR is configured on Eth-Trunk lacp bundle 2 x 100G Ports with 40G QSFP. observing un-even...
2022-03-29 Knowledge Base
-
【Knowledge Base】 LACP load balancing traffic unequally on Access Network with some models of Huawei switch
Currently, only one enhanced load balancing profile can be configured. 2....Because traffic changes continuously, the load balance of the link changes...
2021-12-29 Knowledge Base
-
【Knowledge Base】 Traffic is not getting load shared between the Eth-trunk ports
the eth-trunk port) 【Problem Analysis】 The switch 3 interface not reference load ...Refer load - balance at eth-trunk interface.
2022-03-31 Knowledge Base
-
【Knowledge Base】 Principle of PSU Load Balancing for Server
Principle of PSU Load Balancing for Server Regarding to PSU power load ...When the load greater than 50%, the difference will be within 5%. 3.
2020-12-31 Knowledge Base
-
【Knowledge Base】 LAG load balancing not working properly between NE05E and MA5800x7 OLT
Check if the load - balance profile is the default one or is it changed Notice that the load ...By default, Layer 3 Eth-Trunk interfaces perform load balancing based...
2021-01-28 Knowledge Base
-
【Knowledge Base】 After adding the third link, the traffic is not load balance well
After adding the third link, the traffic is not load balance well on Eth-Trunk 0....Capture the packets on Eth-Trunk0, and configure the “ipv4 field l4-dport l4-sport” as...
2020-05-27 Knowledge Base
-
【Knowledge Base】 Troubleshooting Case of Secospace USG6360-Some Terminals Cannot Access website of icrs.transunion.hk
ISP1 and ISP2 access the Internet in load balancing mode.
2021-06-26 Knowledge Base
-
【Knowledge Base】 USG6655E "hrp standby-device" configuration is lost after upgrade
Check on the "display current-configuration", customer have enable "hrp load balance ...Therefore, disable "hrp load balance device" in subsequent configurations.
2021-06-22 Knowledge Base
-
【Knowledge Base】 BGP session flaps
Now, it requires the BGP peer side ( LB device) to help clarify the detailed information...It requires the BGP peer side ( LB device) to help clarify the detailed information...
2022-02-18 Knowledge Base
-
【Knowledge Base】 S6720-30C-EI-24S-DC---Stack Ports Uneven Traffic
The cause is that traffic features are unique and hash load balancing cannot...(note：Bydefault, the hash algorithm for load balancing is enabled on stack ports.)...
2021-04-06 Knowledge Base
-
【FAQ】 What should I do if the configured IP phone linkage service cannot take effect?
The IP phone linkage service conflicts with call forwarding unconditional (CFU), call forwarding busy (CFB), call forwarding conditional (CFC), and call transfer to voice mailbox unconditional (CTVMU) services. Cancel the conflicting servic...
-
【FAQ】 What should I do if the configured one number link you (ONLY) service cannot take effect?
The ONLY service conflicts with call forwarding unconditional (CFU) and call transfer to voice mailbox unconditional (CTVMU) services. Cancel the conflicting services or reconfigure the account, and then verify the ONLY service again....
-
【FAQ】 What should I do if the configured simultaneous ringing service cannot take effect?
The simultaneous ringing service conflicts with call forwarding unconditional (CFU), call transfer to voice mailbox unconditional (CTVMU), absence, and do not disturb (DND) services. Cancel the conflicting services or reconfigure the accoun...
-
【FAQ】 How to resolve the issue when the ringback tone cannot be heard when the U1900 unified gateway interworks with a carrier's network?
If the trunk bearer is configured and the ringback tone from the carrier side cannot be heard, check the system settings and set the peerringback parameter to yes. config modify tgld callsourceno officeno protocol prefix [peerringback] p...
-
【FAQ】 Why cannot the ringback tone be heard when the U1930 interworks with a carrier's device
If the trunk bearer is configured, the ringback tone from the carrier side cannot be heard. You need to check system settings and set the peerringback parameter to yes. config modify tgld callsourceno officeno protocol prefix [peerring...
-
【FAQ】 Four user rights levels on the U1900 series unified gateway
The U1900 series unified gateway provides four user rights levels: Default, Normal, Advanced, and Super. - Default: Users at this level have the rights to use the local number query, call transfer, call forwarding, call waiting, abbreviated...
-
【FAQ】 What is the maximum number of participants in a voice conference supported by the U1960?
The U1910/U1930 supports a maximum of 4 conferences and 12 participants. Each conference hall supports a maximum of 12 participants. The U1911 supports a maximum of 20 conferences and 60 participants. Each conference hall supports a maximu...
-
【FAQ】 How many levels of IVR menus are supported by the customized automatic switchboard of the U1900?
The IVR flows and announcements can be customized. A maximum of 10 levels of IVR menus are supported. The keys for repeatedly listening to an IVR menu and for forwarding a call to a voice mailbox are configurable. Different announcements ca...
-
【FAQ】 If the U1900 has imported a license file, can I decide to not use the license (invalidate the license)?
After a license is imported into the U1900, you can run the config disable license command to invalidate the license. The system uses the default license after the imported license is invalidated. Note: The U1900 license cannot be re-import...
-
【FAQ】 If the U1900 license has been activated, can I revoke (roll back or re-apply) the license?
The activated U1900 license can be revoked. 1. After the U1900 has imported the license, run the config disable license command to revoke the license. 2. Record the revocation code displayed in the command output. 3. On the license platfor...
Filter by Time
Filter by Time
Did not find what you were looking for?
Search on support.huawei.com
Contact Us: e_online@huawei.com Copyright © 2022 Huawei Technologies Co., Ltd. All rights reserved.
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.