Huawei Enterprise Support Community

Results: Found related users 1313, related groups 0, related topics 1335, related cases 322, related FAQ 263

All User Group Post Case FAQ

The Most Asked Questions about Huawei Firewall Products

Whether a license needs to be applied for and loaded for the hot standby function...In load balancing hot standby, if addresses in a NAT address pool are...

2019-12-4

dr.wow - Security

6447 84
VRRP is flapping for vlan 10 but not for the rest

LSW1 and LSW2 have 2 default routes pointing to router MAIN1 and MAIN2 (SW's do load ...SW's also do load balance based on VLAN's.

2014-10-12

kem_kem - Routing & Switching

4201 6
Understanding of MSTP - Example for Configuring MSTP + VRRP Network

Traffic is thus load balanced and communication reliability is improved....Configure MST and create multi-instance, map VLAN 2 to MSTI1, and map VLAN 3 to MSTI2 to...

2021-5-25

andersoncf1 - Routing & Switching

914 33
[All About Switches] Example for Configuring the Egress of a Large-scale Campus

Deploy the Huawei Redundancy Protocol (HRP) on firewalls to implement load balancing ...Firewalls (FW1 and FW2) 6 Configure HRP. (1) Associate VRRP Group Management Protocol (...

2015-11-4

All_About_Switch - Routing & Switching

3735 2
[Approaching NE (14) ] A Packet‘s Adventures on Huawei Routers - MPLS Forwarding (1

Getting Started with MPLS and MPLS VPN MPLS Overview and Background Multiprotocol Label Switching (MPLS) uses labels, not routes, to forward packets and combines the advantages of...

2016-3-31

NE_Router - Routing & Switching

6856 17
WDM ASON Routing Properties

Default: 60 TE Policy NE mode, Shortest Distance Mode, Minimum Hop Count Mode, Integrated...In the load balancing mode, the weight of the bandwidth is 50 and the...

2018-9-5

limgsc - Transmission Network

2835 6
Example for configuring STP [All About Switches]

. ・ MSTP implements load balancing among VLANs....Traffic in different VLANs is forwarded through different spanning trees for load ...

2015-6-25

All_About_Switch - Routing & Switching

30296 5
Typical NGFW Module Configuration

The two NGFW Modules implement hot standby in Layer-2 load balancing mode....The NGFW Modules implement hot standby in Layer-2 load balancing mode.

2019-2-28

All_About_Switch - Routing & Switching

388 0
Interoperation and Replacement Guide for OSPF and EIGRP

Load balancing OSPF supports only equal-cost load balancing ....EIGRP is the only protocol that supports unequal load balancing .

2019-2-28

All_About_Switch - Routing & Switching

495 0
Four of Knowledge Bookshelf For Enterprise Network Router

Type Sub-category Product Document Name Document Type Enterprise Network Router Enterprise Network Router NE5000E NE5000E V800R003C00 Configuration Guide - IP Services 03 Configuration...

2018-12-3

DDSN - Routing & Switching

479 2

 1 ···127 128129130 ···134 

【Knowledge Base】 Un-Even Load Balance on S6730-H24X6C Switches

facing uneven load balancing issue on Huawei S-6730 Switches. using four...RPR is configured on Eth-Trunk lacp bundle 2 x 100G Ports with 40G QSFP. observing un-even...

2022-03-29 Knowledge Base
【Knowledge Base】 LACP load balancing traffic unequally on Access Network with some models of Huawei switch

Currently, only one enhanced load balancing profile can be configured. 2....Because traffic changes continuously, the load balance of the link changes...

2021-12-29 Knowledge Base
【Knowledge Base】 Traffic is not getting load shared between the Eth-trunk ports

the eth-trunk port) 【Problem Analysis】 The switch 3 interface not reference load ...Refer load - balance at eth-trunk interface.

2022-03-31 Knowledge Base
【Knowledge Base】 Principle of PSU Load Balancing for Server

Principle of PSU Load Balancing for Server Regarding to PSU power load ...When the load greater than 50%, the difference will be within 5%. 3.

2020-12-31 Knowledge Base
【Knowledge Base】 LAG load balancing not working properly between NE05E and MA5800x7 OLT

Check if the load - balance profile is the default one or is it changed Notice that the load ...By default, Layer 3 Eth-Trunk interfaces perform load balancing based...

2021-01-28 Knowledge Base
【Knowledge Base】 After adding the third link, the traffic is not load balance well

After adding the third link, the traffic is not load balance well on Eth-Trunk 0....Capture the packets on Eth-Trunk0, and configure the “ipv4 field l4-dport l4-sport” as...

2020-05-27 Knowledge Base
【Knowledge Base】 Troubleshooting Case of Secospace USG6360-Some Terminals Cannot Access website of icrs.transunion.hk

ISP1 and ISP2 access the Internet in load balancing mode.

2021-06-26 Knowledge Base
【Knowledge Base】 USG6655E "hrp standby-device" configuration is lost after upgrade

Check on the "display current-configuration", customer have enable "hrp load balance ...Therefore, disable "hrp load balance device" in subsequent configurations.

2021-06-22 Knowledge Base
【Knowledge Base】 BGP session flaps

Now, it requires the BGP peer side ( LB device) to help clarify the detailed information...It requires the BGP peer side ( LB device) to help clarify the detailed information...

2022-02-18 Knowledge Base
【Knowledge Base】 S6720-30C-EI-24S-DC---Stack Ports Uneven Traffic

The cause is that traffic features are unique and hash load balancing cannot...(note：Bydefault, the hash algorithm for load balancing is enabled on stack ports.)...

2021-04-06 Knowledge Base

 12 3 4 5 6 ···33 

Filter by Time

Did not find what you were looking for?

Search on support.huawei.com

Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.

Please bind your phone number to obtain invitation bonus.

User More>

Post More>

Case More>

【Knowledge Base】 Un-Even Load Balance on S6730-H24X6C Switches

【Knowledge Base】 LACP load balancing traffic unequally on Access Network with some models of Huawei switch

【Knowledge Base】 Traffic is not getting load shared between the Eth-trunk ports

【Knowledge Base】 Principle of PSU Load Balancing for Server

【Knowledge Base】 LAG load balancing not working properly between NE05E and MA5800x7 OLT

FAQ More>

【FAQ】 What should I do if the configured IP phone linkage service cannot take effect?

【FAQ】 What should I do if the configured one number link you (ONLY) service cannot take effect?

【FAQ】 What should I do if the configured simultaneous ringing service cannot take effect?

【FAQ】 How to resolve the issue when the ringback tone cannot be heard when the U1900 unified gateway interworks with a carrier's network?

【FAQ】 Why cannot the ringback tone be heard when the U1930 interworks with a carrier's device

【Knowledge Base】 Un-Even Load Balance on S6730-H24X6C Switches

【Knowledge Base】 LACP load balancing traffic unequally on Access Network with some models of Huawei switch

【Knowledge Base】 Traffic is not getting load shared between the Eth-trunk ports

【Knowledge Base】 Principle of PSU Load Balancing for Server

【Knowledge Base】 LAG load balancing not working properly between NE05E and MA5800x7 OLT

【Knowledge Base】 After adding the third link, the traffic is not load balance well

【Knowledge Base】 Troubleshooting Case of Secospace USG6360-Some Terminals Cannot Access website of icrs.transunion.hk

【Knowledge Base】 USG6655E "hrp standby-device" configuration is lost after upgrade

【Knowledge Base】 BGP session flaps

【Knowledge Base】 S6720-30C-EI-24S-DC---Stack Ports Uneven Traffic

【FAQ】 What should I do if the configured IP phone linkage service cannot take effect?

【FAQ】 What should I do if the configured one number link you (ONLY) service cannot take effect?

【FAQ】 What should I do if the configured simultaneous ringing service cannot take effect?

【FAQ】 How to resolve the issue when the ringback tone cannot be heard when the U1900 unified gateway interworks with a carrier's network?

【FAQ】 Why cannot the ringback tone be heard when the U1930 interworks with a carrier's device

【FAQ】 Four user rights levels on the U1900 series unified gateway

【FAQ】 What is the maximum number of participants in a voice conference supported by the U1960?

【FAQ】 How many levels of IVR menus are supported by the customized automatic switchboard of the U1900?

【FAQ】 If the U1900 has imported a license file, can I decide to not use the license (invalidate the license)?

【FAQ】 If the U1900 license has been activated, can I revoke (roll back or re-apply) the license?

Filter by Time

Filter by Time

Did not find what you were looking for?