Results: Found related users 1313, related groups 0, related topics 1335, related cases 322, related FAQ 263
User More>
Post More>
-
LB
Load balancing principle: Many Huawei products use the load balancing technology....To learn more about load balancing , visit the following link: ...
-
Huawei RTN LB Test
Today I would like to share , how make LB test To FE ports on RTN LB Test : With the loopback tester ( LB ) , you can check the bidirectional communication...
2022-1-4
amr_rashedy - Wireless & Microwave
392 14 -
EIP on LB
Hi Cloud Expert Does Elastic IP remains associated with VM instance using Load balancer . 21-3-34...
2021-7-21
BAZ - Cloud & Big Data
308 2 -
website on LB
Hello One of our client at North region has hosted their company website on CLOUD, behind Load Balancer that is configured to handle HTTP and HTTPS separately.
2021-7-27
BAZ - Cloud & Big Data
180 2 -
ETH-TRUNK LOAD - BALANCE S5720-LI
I'm having a problem with an S5720-LI load - balance , it's just not functioning!...di int br PHY: Physical *down: administratively down #down: LBDT down (l) : loopback (s) : spoofing ( ...
2019-7-6
l2vc - Routing & Switching
1067 6
Case More>
-
【Knowledge Base】 Un-Even Load Balance on S6730-H24X6C Switches
facing uneven load balancing issue on Huawei S-6730 Switches. using four...RPR is configured on Eth-Trunk lacp bundle 2 x 100G Ports with 40G QSFP. observing un-even...
2022-03-29 Knowledge Base
-
【Knowledge Base】 LACP load balancing traffic unequally on Access Network with some models of Huawei switch
Currently, only one enhanced load balancing profile can be configured. 2....Because traffic changes continuously, the load balance of the link changes...
2021-12-29 Knowledge Base
-
【Knowledge Base】 Traffic is not getting load shared between the Eth-trunk ports
the eth-trunk port) 【Problem Analysis】 The switch 3 interface not reference load ...Refer load - balance at eth-trunk interface.
2022-03-31 Knowledge Base
-
【Knowledge Base】 Principle of PSU Load Balancing for Server
Principle of PSU Load Balancing for Server Regarding to PSU power load ...When the load greater than 50%, the difference will be within 5%. 3.
2020-12-31 Knowledge Base
-
【Knowledge Base】 LAG load balancing not working properly between NE05E and MA5800x7 OLT
Check if the load - balance profile is the default one or is it changed Notice that the load ...By default, Layer 3 Eth-Trunk interfaces perform load balancing based...
2021-01-28 Knowledge Base
FAQ More>
-
【FAQ】 What should I do if the configured IP phone linkage service cannot take effect?
The IP phone linkage service conflicts with call forwarding unconditional (CFU), call forwarding busy (CFB), call forwarding conditional (CFC), and call transfer to voice mailbox unconditional (CTVMU) services. Cancel the conflicting servic...
-
【FAQ】 What should I do if the configured one number link you (ONLY) service cannot take effect?
The ONLY service conflicts with call forwarding unconditional (CFU) and call transfer to voice mailbox unconditional (CTVMU) services. Cancel the conflicting services or reconfigure the account, and then verify the ONLY service again....
-
【FAQ】 What should I do if the configured simultaneous ringing service cannot take effect?
The simultaneous ringing service conflicts with call forwarding unconditional (CFU), call transfer to voice mailbox unconditional (CTVMU), absence, and do not disturb (DND) services. Cancel the conflicting services or reconfigure the accoun...
-
【FAQ】 How to resolve the issue when the ringback tone cannot be heard when the U1900 unified gateway interworks with a carrier's network?
If the trunk bearer is configured and the ringback tone from the carrier side cannot be heard, check the system settings and set the peerringback parameter to yes. config modify tgld callsourceno officeno protocol prefix [peerringback] p...
-
【FAQ】 Why cannot the ringback tone be heard when the U1930 interworks with a carrier's device
If the trunk bearer is configured, the ringback tone from the carrier side cannot be heard. You need to check system settings and set the peerringback parameter to yes. config modify tgld callsourceno officeno protocol prefix [peerring...
Sorry, no matching result is found.
-
LB
Load balancing principle: Many Huawei products use the load balancing technology....To learn more about load balancing , visit the following link: ...
-
Huawei RTN LB Test
Today I would like to share , how make LB test To FE ports on RTN LB Test : With the loopback tester ( LB ) , you can check the bidirectional communication...
2022-1-4
amr_rashedy - Wireless & Microwave
392 14 -
EIP on LB
Hi Cloud Expert Does Elastic IP remains associated with VM instance using Load balancer . 21-3-34...
2021-7-21
BAZ - Cloud & Big Data
308 2 -
website on LB
Hello One of our client at North region has hosted their company website on CLOUD, behind Load Balancer that is configured to handle HTTP and HTTPS separately.
2021-7-27
BAZ - Cloud & Big Data
180 2 -
ETH-TRUNK LOAD - BALANCE S5720-LI
I'm having a problem with an S5720-LI load - balance , it's just not functioning!...di int br PHY: Physical *down: administratively down #down: LBDT down (l) : loopback (s) : spoofing ( ...
2019-7-6
l2vc - Routing & Switching
1067 6 -
Load Balancer
LOAD BALANCER Load balancing is a technique used to distribute... Load balancing is usually categorized as supporting either Layer 4 or Layer 7.
-
Which of the following commands is used to create a static load balancing group?
D # Create the static load balancing group and set the start threshold for...[AC-wlan-view] sta- load - balance static-group name wlan-static [AC-wlan-sta...
2022-1-26
simon.waweru - WLAN
162 3 -
Static load balancing and Dynamic load balancing
Hello everyone, Depending on whether a load balancing group needs to be ...The AC adds these APs to a load balancing group and then uses a load ...
-
BGP load balancing
I know that the load balancing as-path-ignore command can be used to implement...Now my question is after configuring the command, load balancing happens...
2020-7-25
cataleyagonzc - Routing & Switching
315 2 -
BGP load balancing
Hello everyone, Why does load balancing require the same As-Path?...Why is load balancing disabled by default?
2020-7-31
Qazik - Routing & Switching
341 2
-
【Knowledge Base】 OSPF Networking cannot Realize Load Balance for Different Bandwidth Links of NE5000E
Replace the 2.5G link with 10G for load balance ....Replace the 2.5G link with 10G for load balance .
2012-07-27 Knowledge Base
-
【Knowledge Base】 NE16E/08E/05: Load Balancing Resulting in Lower Speed in Internet Access
After load balancing is applied on the NE16E/08E/05, the subscribers connected...The load balancing on the NE16E/08E/05 is based on packets, that is,...
2012-07-27 Knowledge Base
-
【Knowledge Base】 The solution of an office USG5300 test problem
The customer has five Internet lines, use five default routing to realize dynamic load ...When this problem happened, suggest guide customers to use PBR, dive the important user...
2012-11-09 Knowledge Base
-
【Knowledge Base】 NE80E Load Balance is not Mean and there is Loss in MAN
According to phenomenon two, for most of high-end devices (such as NE80E) , it balances ...The downlink traffic of MAN is too large and NE80E version has problem in load ...
2012-07-27 Knowledge Base
-
【Knowledge Base】 Eth-Trunk can’t interconnect
For example: display trunkmembership eth-trunk 1 Trunk ID : 1 Used status : valid Type : Ethernet...For example： display trunkmembership eth-trunk 1 Trunk ID : 1 Used status : valid Type...
2012-11-12 Knowledge Base
-
【Knowledge Base】 Load Balancing problem in mpgroups in NE40-8 in VRP5.3 caused by incorrect configuration
We have to change the load balancing mode to "per packet" to share the load ...We have to change the load balancing mode to "per packet" to share the...
2012-07-27 Knowledge Base
-
【Knowledge Base】 Users Cannot Access the Network in the Case of Packet-Based Load Balancing Configured Between LAC and LNS
The fault symptom is as follows: Does the NE20 support packet-based load balancing ...If load is balanced between LAC and LNS, the protocol packets may be...
2012-07-27 Knowledge Base
-
【Knowledge Base】 How to make load - balancing on BRAS if PITP or Option 82 feature is enabled on access device.
The problem happened after customer start use load balancing between Ethernet...So it is impossible to realize load balancing between two Ethernets ports...
2012-07-27 Knowledge Base
-
【Knowledge Base】 AR46 Attached Users are Load Balancing because Imported Static Route of AR46 is Type 2
But the traffic of user network segment under AR46 is load balancing of two rotues: AR46-S8016－GSR12012－GSR12016 or AR46－S8016－NE80－－GSR12416.
2012-07-27 Knowledge Base
-
【Knowledge Base】 NE80E cannot Realize Load Balance of OSPF Equal-cost Route because of FA Problem
The load balance of OSPF is not realized....The load balance of OSPF is not realized.
2012-07-27 Knowledge Base
-
【FAQ】 What should I do if the configured IP phone linkage service cannot take effect?
The IP phone linkage service conflicts with call forwarding unconditional (CFU), call forwarding busy (CFB), call forwarding conditional (CFC), and call transfer to voice mailbox unconditional (CTVMU) services. Cancel the conflicting servic...
-
【FAQ】 What should I do if the configured one number link you (ONLY) service cannot take effect?
The ONLY service conflicts with call forwarding unconditional (CFU) and call transfer to voice mailbox unconditional (CTVMU) services. Cancel the conflicting services or reconfigure the account, and then verify the ONLY service again....
-
【FAQ】 What should I do if the configured simultaneous ringing service cannot take effect?
The simultaneous ringing service conflicts with call forwarding unconditional (CFU), call transfer to voice mailbox unconditional (CTVMU), absence, and do not disturb (DND) services. Cancel the conflicting services or reconfigure the accoun...
-
【FAQ】 How to resolve the issue when the ringback tone cannot be heard when the U1900 unified gateway interworks with a carrier's network?
If the trunk bearer is configured and the ringback tone from the carrier side cannot be heard, check the system settings and set the peerringback parameter to yes. config modify tgld callsourceno officeno protocol prefix [peerringback] p...
-
【FAQ】 Why cannot the ringback tone be heard when the U1930 interworks with a carrier's device
If the trunk bearer is configured, the ringback tone from the carrier side cannot be heard. You need to check system settings and set the peerringback parameter to yes. config modify tgld callsourceno officeno protocol prefix [peerring...
-
【FAQ】 Four user rights levels on the U1900 series unified gateway
The U1900 series unified gateway provides four user rights levels: Default, Normal, Advanced, and Super. - Default: Users at this level have the rights to use the local number query, call transfer, call forwarding, call waiting, abbreviated...
-
【FAQ】 What is the maximum number of participants in a voice conference supported by the U1960?
The U1910/U1930 supports a maximum of 4 conferences and 12 participants. Each conference hall supports a maximum of 12 participants. The U1911 supports a maximum of 20 conferences and 60 participants. Each conference hall supports a maximu...
-
【FAQ】 How many levels of IVR menus are supported by the customized automatic switchboard of the U1900?
The IVR flows and announcements can be customized. A maximum of 10 levels of IVR menus are supported. The keys for repeatedly listening to an IVR menu and for forwarding a call to a voice mailbox are configurable. Different announcements ca...
-
【FAQ】 If the U1900 has imported a license file, can I decide to not use the license (invalidate the license)?
After a license is imported into the U1900, you can run the config disable license command to invalidate the license. The system uses the default license after the imported license is invalidated. Note: The U1900 license cannot be re-import...
-
【FAQ】 If the U1900 license has been activated, can I revoke (roll back or re-apply) the license?
The activated U1900 license can be revoked. 1. After the U1900 has imported the license, run the config disable license command to revoke the license. 2. Record the revocation code displayed in the command output. 3. On the license platfor...
Filter by Time
Filter by Time
Did not find what you were looking for?
Search on support.huawei.com
Contact Us: e_online@huawei.com Copyright © 2022 Huawei Technologies Co., Ltd. All rights reserved.
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.