Results: Found related users 1313, related groups 0, related topics 1335, related cases 322, related FAQ 263
User More>
Post More>
-
LB
Load balancing principle: Many Huawei products use the load balancing technology....To learn more about load balancing , visit the following link: ...
-
Huawei RTN LB Test
Today I would like to share , how make LB test To FE ports on RTN LB Test : With the loopback tester ( LB ) , you can check the bidirectional communication...
2022-1-4
amr_rashedy - Wireless & Microwave
392 14 -
EIP on LB
Hi Cloud Expert Does Elastic IP remains associated with VM instance using Load balancer . 21-3-34...
2021-7-21
BAZ - Cloud & Big Data
308 2 -
website on LB
Hello One of our client at North region has hosted their company website on CLOUD, behind Load Balancer that is configured to handle HTTP and HTTPS separately.
2021-7-27
BAZ - Cloud & Big Data
180 2 -
ETH-TRUNK LOAD - BALANCE S5720-LI
I'm having a problem with an S5720-LI load - balance , it's just not functioning!...di int br PHY: Physical *down: administratively down #down: LBDT down (l) : loopback (s) : spoofing ( ...
2019-7-6
l2vc - Routing & Switching
1067 6
Case More>
-
【Knowledge Base】 Un-Even Load Balance on S6730-H24X6C Switches
facing uneven load balancing issue on Huawei S-6730 Switches. using four...RPR is configured on Eth-Trunk lacp bundle 2 x 100G Ports with 40G QSFP. observing un-even...
2022-03-29 Knowledge Base
-
【Knowledge Base】 LACP load balancing traffic unequally on Access Network with some models of Huawei switch
Currently, only one enhanced load balancing profile can be configured. 2....Because traffic changes continuously, the load balance of the link changes...
2021-12-29 Knowledge Base
-
【Knowledge Base】 Traffic is not getting load shared between the Eth-trunk ports
the eth-trunk port) 【Problem Analysis】 The switch 3 interface not reference load ...Refer load - balance at eth-trunk interface.
2022-03-31 Knowledge Base
-
【Knowledge Base】 Principle of PSU Load Balancing for Server
Principle of PSU Load Balancing for Server Regarding to PSU power load ...When the load greater than 50%, the difference will be within 5%. 3.
2020-12-31 Knowledge Base
-
【Knowledge Base】 LAG load balancing not working properly between NE05E and MA5800x7 OLT
Check if the load - balance profile is the default one or is it changed Notice that the load ...By default, Layer 3 Eth-Trunk interfaces perform load balancing based...
2021-01-28 Knowledge Base
FAQ More>
-
【FAQ】 What should I do if the configured IP phone linkage service cannot take effect?
The IP phone linkage service conflicts with call forwarding unconditional (CFU), call forwarding busy (CFB), call forwarding conditional (CFC), and call transfer to voice mailbox unconditional (CTVMU) services. Cancel the conflicting servic...
-
【FAQ】 What should I do if the configured one number link you (ONLY) service cannot take effect?
The ONLY service conflicts with call forwarding unconditional (CFU) and call transfer to voice mailbox unconditional (CTVMU) services. Cancel the conflicting services or reconfigure the account, and then verify the ONLY service again....
-
【FAQ】 What should I do if the configured simultaneous ringing service cannot take effect?
The simultaneous ringing service conflicts with call forwarding unconditional (CFU), call transfer to voice mailbox unconditional (CTVMU), absence, and do not disturb (DND) services. Cancel the conflicting services or reconfigure the accoun...
-
【FAQ】 How to resolve the issue when the ringback tone cannot be heard when the U1900 unified gateway interworks with a carrier's network?
If the trunk bearer is configured and the ringback tone from the carrier side cannot be heard, check the system settings and set the peerringback parameter to yes. config modify tgld callsourceno officeno protocol prefix [peerringback] p...
-
【FAQ】 Why cannot the ringback tone be heard when the U1930 interworks with a carrier's device
If the trunk bearer is configured, the ringback tone from the carrier side cannot be heard. You need to check system settings and set the peerringback parameter to yes. config modify tgld callsourceno officeno protocol prefix [peerring...
Sorry, no matching result is found.
-
LB
Load balancing principle: Many Huawei products use the load balancing technology....To learn more about load balancing , visit the following link: ...
-
Huawei RTN LB Test
Today I would like to share , how make LB test To FE ports on RTN LB Test : With the loopback tester ( LB ) , you can check the bidirectional communication...
2022-1-4
amr_rashedy - Wireless & Microwave
392 14 -
EIP on LB
Hi Cloud Expert Does Elastic IP remains associated with VM instance using Load balancer . 21-3-34...
2021-7-21
BAZ - Cloud & Big Data
308 2 -
website on LB
Hello One of our client at North region has hosted their company website on CLOUD, behind Load Balancer that is configured to handle HTTP and HTTPS separately.
2021-7-27
BAZ - Cloud & Big Data
180 2 -
ETH-TRUNK LOAD - BALANCE S5720-LI
I'm having a problem with an S5720-LI load - balance , it's just not functioning!...di int br PHY: Physical *down: administratively down #down: LBDT down (l) : loopback (s) : spoofing ( ...
2019-7-6
l2vc - Routing & Switching
1067 6 -
Load Balancer
LOAD BALANCER Load balancing is a technique used to distribute... Load balancing is usually categorized as supporting either Layer 4 or Layer 7.
-
Which of the following commands is used to create a static load balancing group?
D # Create the static load balancing group and set the start threshold for...[AC-wlan-view] sta- load - balance static-group name wlan-static [AC-wlan-sta...
2022-1-26
simon.waweru - WLAN
162 3 -
Static load balancing and Dynamic load balancing
Hello everyone, Depending on whether a load balancing group needs to be ...The AC adds these APs to a load balancing group and then uses a load ...
-
BGP load balancing
I know that the load balancing as-path-ignore command can be used to implement...Now my question is after configuring the command, load balancing happens...
2020-7-25
cataleyagonzc - Routing & Switching
315 2 -
BGP load balancing
Hello everyone, Why does load balancing require the same As-Path?...Why is load balancing disabled by default?
2020-7-31
Qazik - Routing & Switching
341 2
-
【Knowledge Base】 NAT server is not working properly on AR dual link
In this case, we suspect that traffic from Internet to x.x.x.30 (internal ip is 192.168.110.10 ) is forward via interface G1/1/8, which is connecting AR201 interface Ethernet0/0/8.
2016-07-14 Knowledge Base
-
【Knowledge Base】 MSU Load Balancing Failure
Whenever they are in a different subnet, they are unable to ping 10.40.29.11 MSU, which leads...However every call that the load balancer points to the working MSU (...
2015-10-12 Knowledge Base
-
【Knowledge Base】 Load Balancing Failed When the USG5160 Is Connected to Two Upstream Routers at the Egress
VRRP multi-gateway load balancing is configured on both routers....Sticky load balancing 3.
2015-10-31 Knowledge Base
-
【Knowledge Base】 Huawei and Dell OSPF default route Cost Issue
S12700#1 & S12700#2 same device and same OSPF cost, so it can load balance ....It can not load balance .
2016-02-01 Knowledge Base
-
【Knowledge Base】 FAQ-Does the SIR Cluster Support Load Balancing
Does the SIR cluster support load balancing ?...Products and versions: VTL6000 V100R003 VTL6900 V100R005 The SIR cluster supports load ...
2015-08-04 Knowledge Base
-
【Knowledge Base】 Inter-card NLB Service Forwarding Is Abnormal Because the G24SA Card of the S7700 Does Not Support NLB
Inter-card NLB Service Forwarding Is Abnormal Because the G24SA Card of the S7700 Does Not...NLB supports load balancing and redundancy among servers in the cluster...
2015-11-20 Knowledge Base
-
【Knowledge Base】 APs and users communicate with the slave AC of HSB
Moreover, this situation can achieve load balancing sometimes, we can make it controllable to make use.
2015-12-15 Knowledge Base
-
【Knowledge Base】 An S5700 Fails to Communicate with a Server with Dual Network Adapters Equipped
As shown in Figure 6-1, an S5700 is connected to an HP server through an Eth-Trunk in manual...However, the S5700 is using the manual load balance mode for link aggregation.
2015-10-13 Knowledge Base
-
【Knowledge Base】 FAQ-What Determines the Active and Standby Status of Firewalls in Load Balancing Mode
What Determines the Active and Standby Status of Firewalls in Load Balancing Mode?...In load balancing mode, the firewall on which hot standby is enabled...
2015-07-01 Knowledge Base
-
【Knowledge Base】 FAQ-Does the V300R001 Support Sticky Load Balancing in Case of ECMP Routes
Does the V300R001 Support Sticky Load Balancing in Case of ECMP Routes?...The V300R001C00SPC800 and later versions support sticky load balancing ...
2015-07-01 Knowledge Base
-
【FAQ】 What should I do if the configured IP phone linkage service cannot take effect?
The IP phone linkage service conflicts with call forwarding unconditional (CFU), call forwarding busy (CFB), call forwarding conditional (CFC), and call transfer to voice mailbox unconditional (CTVMU) services. Cancel the conflicting servic...
-
【FAQ】 What should I do if the configured one number link you (ONLY) service cannot take effect?
The ONLY service conflicts with call forwarding unconditional (CFU) and call transfer to voice mailbox unconditional (CTVMU) services. Cancel the conflicting services or reconfigure the account, and then verify the ONLY service again....
-
【FAQ】 What should I do if the configured simultaneous ringing service cannot take effect?
The simultaneous ringing service conflicts with call forwarding unconditional (CFU), call transfer to voice mailbox unconditional (CTVMU), absence, and do not disturb (DND) services. Cancel the conflicting services or reconfigure the accoun...
-
【FAQ】 How to resolve the issue when the ringback tone cannot be heard when the U1900 unified gateway interworks with a carrier's network?
If the trunk bearer is configured and the ringback tone from the carrier side cannot be heard, check the system settings and set the peerringback parameter to yes. config modify tgld callsourceno officeno protocol prefix [peerringback] p...
-
【FAQ】 Why cannot the ringback tone be heard when the U1930 interworks with a carrier's device
If the trunk bearer is configured, the ringback tone from the carrier side cannot be heard. You need to check system settings and set the peerringback parameter to yes. config modify tgld callsourceno officeno protocol prefix [peerring...
-
【FAQ】 Four user rights levels on the U1900 series unified gateway
The U1900 series unified gateway provides four user rights levels: Default, Normal, Advanced, and Super. - Default: Users at this level have the rights to use the local number query, call transfer, call forwarding, call waiting, abbreviated...
-
【FAQ】 What is the maximum number of participants in a voice conference supported by the U1960?
The U1910/U1930 supports a maximum of 4 conferences and 12 participants. Each conference hall supports a maximum of 12 participants. The U1911 supports a maximum of 20 conferences and 60 participants. Each conference hall supports a maximu...
-
【FAQ】 How many levels of IVR menus are supported by the customized automatic switchboard of the U1900?
The IVR flows and announcements can be customized. A maximum of 10 levels of IVR menus are supported. The keys for repeatedly listening to an IVR menu and for forwarding a call to a voice mailbox are configurable. Different announcements ca...
-
【FAQ】 If the U1900 has imported a license file, can I decide to not use the license (invalidate the license)?
After a license is imported into the U1900, you can run the config disable license command to invalidate the license. The system uses the default license after the imported license is invalidated. Note: The U1900 license cannot be re-import...
-
【FAQ】 If the U1900 license has been activated, can I revoke (roll back or re-apply) the license?
The activated U1900 license can be revoked. 1. After the U1900 has imported the license, run the config disable license command to revoke the license. 2. Record the revocation code displayed in the command output. 3. On the license platfor...
Filter by Time
Filter by Time
Did not find what you were looking for?
Search on support.huawei.com
Contact Us: e_online@huawei.com Copyright © 2022 Huawei Technologies Co., Ltd. All rights reserved.
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.