Results: Found related users 0, related groups 0, related topics 64, related cases 22, related FAQ 0
Post More>
-
EA5800 VPLS
Does the EA5800 Support VPLS?...If it supports VPLS, can you tell me how to configure VPLS on the EA5800 ?
2022-2-17
user_40397843 - Access Network
187 3 -
EA5800 Health Check
Hi team, The EA5800 device we were using was having some problems recently and we tried to check it out with the edesk pro but found it was not supported.
2021-8-25
Steven_Gerard - Access Network
274 3 -
Models of OLT MA/ EA5800
Today, I will share with you basic information about different models of OLT MA5800/ EA5800 ...MA5800/ EA5800 -X17 OLT MA5800/ EA5800 -X17 is the biggest MA5800/ EA5800 .
2021-6-3
Vlada85 - Access Network
723 14 -
EA5800 Alarms Are Abnormal on U2000
Good solution post on EA5800 abnormal alarms on U2000...
2021-12-22
Nino_Chou - Access Network
360 6 -
OLT EA5800 -X17 Information
I'm looking for Description and prices for the OLT EA5800 - X17 and the H901GPSFE service card .
2021-7-18
E.DR_91 - Access Network
298 3
Case More>
-
【Knowledge Base】 SmartAX EA5800 -X2 receive alarm the battery loop is broken
SmartAX EA5800 -X2 receive alarm as below display alarm active all ALARM 56 FAULT...SmartAX EA5800 -X2 do support dual power supply, AC and DC.
2021-07-08 Knowledge Base
-
【Knowledge Base】 OLT EA5800 -X2 displays a duplicated mac address warning known by the network side and by the gpon side.
EA5800 -X2 (config) #display mac-address vlan 134 { || }: Command: display mac-address... EA5800 -X2 (diagnose) %%trace-counter ingress 0/1/12 ont 5 source 8840-334e-da7f...
2021-10-06 Knowledge Base
-
【Knowledge Base】 How to bind static mac-address address for ONT eth port
Disable the ONT eth port learning mac-address: EA5800 -X2 (config-if-gpon-0/1) #mac-address...Configure static mac-address for the ont ETH port: EA5800 -X2 (config-if-gpon-0...
2021-05-29 Knowledge Base
-
【Knowledge Base】 ONT Remote Configuration
support remote-http ont OLT is already configured and ONTs are added to the OLT.Now to configure wifi ssid and PSK we need to visit all accomodations to configure ONT manually.Our...
2022-04-21 Knowledge Base
-
【Knowledge Base】 L2 isolation inquiry
if the switch does not support L2 isolation , need change the OLT NNI and UNI mac-address learning priority to same By default the OLT UNI mac address learning priority is 0 , NNI...
2022-01-31 Knowledge Base
Sorry, no matching result is found.
Sorry, no matching result is found.
-
【Knowledge Base】 SmartAX EA5800 -X2 receive alarm the battery loop is broken
SmartAX EA5800 -X2 receive alarm as below display alarm active all ALARM 56 FAULT...SmartAX EA5800 -X2 do support dual power supply, AC and DC.
2021-07-08 Knowledge Base
-
【Knowledge Base】 OLT EA5800 -X2 displays a duplicated mac address warning known by the network side and by the gpon side.
EA5800 -X2 (config) #display mac-address vlan 134 { || }: Command: display mac-address... EA5800 -X2 (diagnose) %%trace-counter ingress 0/1/12 ont 5 source 8840-334e-da7f...
2021-10-06 Knowledge Base
-
【Knowledge Base】 How to bind static mac-address address for ONT eth port
Disable the ONT eth port learning mac-address: EA5800 -X2 (config-if-gpon-0/1) #mac-address...Configure static mac-address for the ont ETH port: EA5800 -X2 (config-if-gpon-0...
2021-05-29 Knowledge Base
-
【Knowledge Base】 ONT Remote Configuration
support remote-http ont OLT is already configured and ONTs are added to the OLT.Now to configure wifi ssid and PSK we need to visit all accomodations to configure ONT manually.Our...
2022-04-21 Knowledge Base
-
【Knowledge Base】 L2 isolation inquiry
if the switch does not support L2 isolation , need change the OLT NNI and UNI mac-address learning priority to same By default the OLT UNI mac address learning priority is 0 , NNI...
2022-01-31 Knowledge Base
-
【Knowledge Base】 OLT Not Broadcasting VLAN
issue with an OLT not broadcasting traffic for a specific VLAN 3633.The topology is as per the below diagram: The ONTs on OLT 2 in the above diagram uplinked to OLT 1 is configured...
2022-01-05 Knowledge Base
-
【Knowledge Base】 SmartAX EA5800 -X7---Type B Dual homing-SmartAX EA5800 -X7
dual homing protect Switch over failed Troubleshooting find the protect group peer state is unknown , it should be peer device information not configured As we troubleshooting and...
2020-03-09 Knowledge Base
-
【Knowledge Base】 Maximum bandwidth Utilization
We have 2.4 GB uplink for OLT, I can see as per configuration we mention only 1229952 bandwidth.Is it fine?Or we can utilized more bandwidth for that profile ID-10.Mean can we bind...
2021-12-05 Knowledge Base
-
【Knowledge Base】 Doesn't work when one broadcast network using in the two OLTs
In the customer scenario (suspect AP works in direct mode ) , when terminal in first OLT , the terminal mac-address learned from low priority side ,the bidirectional traffic no problem...
2021-09-01 Knowledge Base
-
【Knowledge Base】 GPON Type B due homing protect switchover issue
Below is GPON TypeB protect typical network topology . using the same topology test ONU switch over from OLT-A to OLT-B ,after switchover the ONU can be online in the OLT-B ,but service...
2021-08-31 Knowledge Base
Sorry, no matching result is found.
Filter by Time
Filter by Time
Did not find what you were looking for?
Search on support.huawei.com
Contact Us: e_online@huawei.com Copyright © 2022 Huawei Technologies Co., Ltd. All rights reserved.
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.