Results: Found related users 0, related groups 0, related topics 139, related cases 13, related FAQ 0
SmartAX EA5800 -X2 receive alarm as below display alarm active all ALARM 56 FAULT...SmartAX EA5800 -X2 do support dual power supply, AC and DC.
2021-07-08 Knowledge Base
EA5800 -X2 (config) #display mac-address vlan 134 { || }: Command: display mac-address... EA5800 -X2 (diagnose) %%trace-counter ingress 0/1/12 ont 5 source 8840-334e-da7f...
2021-10-06 Knowledge Base
Disable the ONT eth port learning mac-address: EA5800 -X2 (config-if-gpon-0/1) #mac-address...Configure static mac-address for the ont ETH port: EA5800 -X2 (config-if-gpon-0...
2021-05-29 Knowledge Base
support remote-http ont OLT is already configured and ONTs are added to the OLT.Now to configure wifi ssid and PSK we need to visit all accomodations to configure ONT manually.Our...
2022-04-21 Knowledge Base
if the switch does not support L2 isolation , need change the OLT NNI and UNI mac-address learning priority to same By default the OLT UNI mac address learning priority is 0 , NNI...
2022-01-31 Knowledge Base
issue with an OLT not broadcasting traffic for a specific VLAN 3633.The topology is as per the below diagram: The ONTs on OLT 2 in the above diagram uplinked to OLT 1 is configured...
2022-01-05 Knowledge Base
We have 2.4 GB uplink for OLT, I can see as per configuration we mention only 1229952 bandwidth.Is it fine?Or we can utilized more bandwidth for that profile ID-10.Mean can we bind...
2021-12-05 Knowledge Base
In the customer scenario (suspect AP works in direct mode ) , when terminal in first OLT , the terminal mac-address learned from low priority side ,the bidirectional traffic no problem...
2021-09-01 Knowledge Base
Below is GPON TypeB protect typical network topology . using the same topology test ONU switch over from OLT-A to OLT-B ,after switchover the ONU can be online in the OLT-B ,but service...
2021-08-31 Knowledge Base
after few days it’s giving issue for iptv machines are not working and then we have to shift ONU on the 2nd OLT then it’s start working for few days and after then is the same case...
2021-07-29 Knowledge Base
Search on support.huawei.com