Results: Found related users 0, related groups 0, related topics 82, related cases 14, related FAQ 0
Post More>
-
DBS 3900
What frequency bands are supported by DBS 3900 ?
2021-11-11
Funstuff - Wireless & Microwave
276 3 -
DBS 3900 WiMAX
The DBS 3900 WiMAX uses a modular design....A BBU 3900 is a baseband subsystem of the DBS 3900 WiMAX.
2022-4-14
Majdi.Chebil - Wireless & Microwave
64 2 -
The bandwidth of the DBS 3900
Which bandwidthes can be created on the DBS 3900 ?
2019-8-28
GuiDance - Wireless & Microwave
347 1 -
Pass DBS 3900 /BBU 3900
Anyone know the default password of DBS 3900 /BBU 3900 ?
2020-1-13
Unicef - Wireless & Microwave
621 2 -
DBS 3900 in GSM-R
Today, I'd like to briefly introduce DBS 3900 Architecture in GSM-R to you.
2021-10-14
SDILHAN - Wireless & Microwave
343 2
Case More>
-
【Knowledge Base】 Failed to activate the RRU version during the upgrade of the BTS
DBS 3900 version updated form V100R012C10SPC260 to V100R013C10SPC310.But...BTS 3900 &BTS5900 V100R013C10SPC310 (eNodeB) Hardware Version Mapping Table” 2.”...
2021-08-19 Knowledge Base
-
【Knowledge Base】 Cell RX Channel Interference Noise Power Unbalanced Alarm
Customer new site reported report “Cell RX Channel Interference Noise Power Unbalanced" alarm after finish integrate new site Feeder for port A and port B not in good condition controbute...
2021-09-29 Knowledge Base
-
【Knowledge Base】 Configure DPU40D-N06A3 to send alarm to NMS when AC input of PSU failed
Customer want to know whether DPU40D-N06A3 can send alarm to NMS when AC input of PSU failure. 1.DPU can report alarm to NMS through RRU 2、Configuring the PMU Run the ADD PMU command...
2021-09-29 Knowledge Base
-
【Knowledge Base】 iphone can attach to the eLTE network, but can't ping the internal server or public DNS server.
After the eLTE network commissioning is completed, the iOS terminal successfully accesses the network but fails to ping the IP address of the SGI interworking server.The message "...
2020-10-27 Knowledge Base
-
【Knowledge Base】 can not configure the RET of the eNB
can not configure the RET of the eNB and Error "No matching result found " appear during configuration no alarm after run command 'LST RETPORT',, found that the ports of RET is configured...
2020-03-30 Knowledge Base
Did not find what you were looking for?
Search on support.huawei.com
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.