Saved-configuration vis current-configuration

DDSN · Created Jul 20, 2021 12:34:26

Hi varanusp,
Do you mean that you do not want to change the configuration, but do not want to perform undo commands one by one, so you want to overwrite the changed configuration with the previous configuration file?
If so, once the switch configuration is changed, it will take effect immediately, that is, you can only perform undo operations one by one.

stephen.xu · Created Jul 19, 2021 08:04:07

Hi, dear

Please kindly wait for a minute.

DDSN · Created Jul 19, 2021 08:10:06

Hi varanusp,
You can run the configuration copy file to running command to run commands in a specified configuration file.

For more information, you can refer to https://support.huawei.com/hedex/hdx.do?docid=EDOC1100126530&id=EN-US_CLIREF_0177113556&lang=en

I hope it helps!

varanusp · Created Jul 19, 2021 08:22:24

My Problem is that we are working with the vrpcfg.zip and not with a seperate configuration file.

varanusp · Created Jul 19, 2021 08:22:38

My Problem is that we are working with the vrpcfg.zip and not with a seperate configuration file.

varanusp · Created Jul 19, 2021 10:41:30

Hello
Maybe I haven't put myself in enough precise terms.
If I have made some changes, I can see them in the current configuration, which differs from the saved configuration. In order to prevent that I have to undo every single change, I would like to overwrite all information from the saved configuration in the current configuration.

varanusp · Created Jul 19, 2021 10:41:41

Hello
Maybe I haven't put myself in enough precise terms.
If I have made some changes, I can see them in the current configuration, which differs from the saved configuration. In order to prevent that I have to undo every single change, I would like to overwrite all information from the saved configuration in the current configuration.

DDSN · Created Jul 20, 2021 12:34:26

Hi varanusp,
Do you mean that you do not want to change the configuration, but do not want to perform undo commands one by one, so you want to overwrite the changed configuration with the previous configuration file?
If so, once the switch configuration is changed, it will take effect immediately, that is, you can only perform undo operations one by one.

Saved-configuration vis current-configuration

Recommended answer

Third Party’s Trade Secret

`@trans`bright_future`~trans`

My Followers

Enterprise

Consumer

Corporate

Carriers

Saved-configuration vis current-configuration

Recommended answer

Third Party’s Trade Secret

`@trans`bright_future`~trans`

My Followers