S6730H qinq termination to vpls problem

Hi,

For the command qinq termination pe-vid ce-vid the allowed VLANs on a sub-interface cannot be created in the system view, and for the command qinq stacking original VLAN IDs specified for QinQ mapping on a sub-interface cannot be globally created.

Please make sure you haven't created them.

It looks like adding isolate spoken inside vsi helps.

Now all is working! Thanks for patience.

To let add other vlans inside vlan 3869, follow the example. This model adds vlans 2 and 4 inside vlan 3869 to be transported, which can be delivered on top of a vlanif or other sub-interface with qinq configured. Below is the example:

interface XGigabitEthernet0/0/6
port link-type hybrid
qinq vlan-translation enable
port hybrid untagged vlan 3869

interface XGigabitEthernet0/0/6.3869
qinq stacking vid 2 pe-vid 3869
qinq stacking vid 4 pe-vid 3869
l2 binding vsi VPLS_v3869

OBS: 

Only vlan 3869 is created in global

Hi,

Yes, you should isolate the VSI users through the command isolate spoken when applying it for multiple users.