Got it

S6700 and S6700 problem

Latest reply: Apr 20, 2020 21:04:57 2442 4 0 0

Hi,

I have problem with connect two switches S6700. 

I connected ports by SFP and state is down (led indicators are off).

The SFP's are OK, I testing this by connecting S6700 to Planet switch and Cisco switch.

When I connect Planet and Cisco the port Huawei switch is in state on !

When I connect Huawei with Huawei is down !

Please help me...

  • x
  • convention:

p00187531
Created Feb 21, 2014 08:00:55 Helpful(0) Helpful(0)

can you display interface XXX when the SFP is connecting two S6700?

View more
  • x
  • convention:

tomy_a
Created Feb 21, 2014 08:56:56 Helpful(0) Helpful(0)

The port 0/0/1 is connected to second S6700, the port 0/0/3 is connect to Planet switch.

The next my test: The loop beetwen two ports on this some switch - both ports up.

 

<Quidway>display int XGigabitEthernet 0/0/1
XGigabitEthernet0/0/1 current state : DOWN
Line protocol current state : DOWN
Description:
Switch Port, PVID :  101, TPID : 8100(Hex), The Maximum Frame Length is 9216
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 200b-c723-4150
Current system time: 2014-02-21 08:41-05:13
Port Mode: COMMON FIBER
Speed : 1000,  Loopback: NONE
Duplex: FULL,  Negotiation: ENABLE
Mdi   : NORMAL
Last 300 seconds input rate 40 bits/sec, 0 packets/sec
Last 300 seconds output rate 40 bits/sec, 0 packets/sec
Input peak rate 999399888 bits/sec, Record time: 2014-02-21 08:41
Output peak rate 999996424 bits/sec, Record time: 2014-02-21 08:41

Input:  134390612 packets, 180590449875 bytes
  Unicast:                  134284775,  Multicast:                       33231
  Broadcast:                    72606,  Jumbo:                               0
  Discard:                          0,  Total Error:                         0

  CRC:                              0,  Giants:                              0
  Jabbers:                          0,  Fragments:                           0
  Runts:                            0,  DropEvents:                          0
  Alignments:                       0,  Symbols:                             0
  Ignoreds:                         0,  Frames:                              0

Output:  153245991 packets, 206036178113 bytes
  Unicast:                  153200711,  Multicast:                       45063
  Broadcast:                      217,  Jumbo:                               0
  Discard:                          0,  Total Error:                         0

  Collisions:                       0,  ExcessiveCollisions:                 0
  Late Collisions:                  0,  Deferreds:                           0
  Buffers Purged:                   0

    Input bandwidth utilization threshold : 100.00%
    Output bandwidth utilization threshold: 100.00%
    Input bandwidth utilization  :    0%
    Output bandwidth utilization :    0%

<Quidway>display int XGigabitEthernet 0/0/3
XGigabitEthernet0/0/3 current state : UP
Line protocol current state : UP
Description:
Switch Port, PVID :    1, TPID : 8100(Hex), The Maximum Frame Length is 9216
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 200b-c723-4150
Current system time: 2014-02-21 08:41-05:13
Port Mode: COMMON FIBER
Speed : 1000,  Loopback: NONE
Duplex: FULL,  Negotiation: ENABLE
Mdi   : NORMAL
Last 300 seconds input rate 40 bits/sec, 0 packets/sec
Last 300 seconds output rate 384 bits/sec, 0 packets/sec
Input peak rate 999999456 bits/sec, Record time: 2014-02-21 08:41
Output peak rate 999410056 bits/sec, Record time: 2014-02-21 08:41

Input:  153203947 packets, 206029862625 bytes
  Unicast:                  153200528,  Multicast:                        2757
  Broadcast:                      662,  Jumbo:                               0
  Discard:                          0,  Total Error:                         0

  CRC:                              0,  Giants:                              0
  Jabbers:                          0,  Fragments:                           0
  Runts:                            0,  DropEvents:                          0
  Alignments:                       0,  Symbols:                             0
  Ignoreds:                         0,  Frames:                              0

Output:  134319495 packets, 180586793724 bytes
  Unicast:                  134277408,  Multicast:                       42065
  Broadcast:                       22,  Jumbo:                               0
  Discard:                          0,  Total Error:                         0

  Collisions:                       0,  ExcessiveCollisions:                 0
  Late Collisions:                  0,  Deferreds:                           0
  Buffers Purged:                   0

    Input bandwidth utilization threshold : 100.00%
    Output bandwidth utilization threshold: 100.00%
    Input bandwidth utilization  :    0%
    Output bandwidth utilization :    0%

<Quidway>

 

View more
  • x
  • convention:

andrebriceno
Created Apr 20, 2020 21:04:52 Helpful(0) Helpful(0)

amazing job, thanks for sharing!
View more
  • x
  • convention:

andrebriceno
Created Apr 20, 2020 21:04:57 Helpful(1) Helpful(1)

Good post
View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."

My Followers

Login and enjoy all the member benefits

Login

Huawei Enterprise Support Community
Huawei Enterprise Support Community
Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.