S5735 MTU configuration
Created: Dec 30, 2020 01:44:45Latest reply: Dec 30, 2020 01:48:21
695
1
0
0
0
Rewarded HiCoins：
0
(problem resolved)
Hello,
Currently, I'm configuring the MTU of an interface for layer 3 switches S5735-S32ST4X, there's an error display: Unrecognized command found at the ‘^’ position.
Please checked whether our layer 3 switches can support the MTU now which below the image of our findings.
- x
- convention：
- Emotion(0)
Featured Answers
|
Hi, To change the MTU size we need to change the port from L2 mode to L3 mode .
But this model cannot support to change the mode of the interface from L2 mode to L3 mode.
I hope this helps. |
|
All Answers
|
Hi, To change the MTU size we need to change the port from L2 mode to L3 mode .
But this model cannot support to change the mode of the interface from L2 mode to L3 mode.
I hope this helps. |
|
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
