S5700-48TP-PWR-SI routing between sub-networks

chenhui · Created Jun 5, 2019 08:14:49

@Mazadon hi!

S5700-48tp-si does support working as a router, but it only supports the static route RIPv1/2.

So, if you want to implement other route protocols, you should exchange another one.

chenhui · Created Jun 5, 2019 08:14:49

@Mazadon hi!

S5700-48tp-si does support working as a router, but it only supports the static route RIPv1/2.

So, if you want to implement other route protocols, you should exchange another one.

Mazadon · Created Jun 7, 2019 12:25:59

Let me ask you again.

Can i config TCP port redirection on this switch?

I need transer traffic from 172.16.10.50:3128 to 192.168.20.10:80

yogijain · Created Jun 7, 2019 13:59:49

So you are looking for NAPT?

Mazadon · Created Jun 7, 2019 14:06:57

Posted by yogijain at 2019-06-07 13:59 So you are looking for NAPT?

Yes, i need to send packets from one host to another.

yogijain · Created Jun 7, 2019 15:48:40

Hi,
Infact, there is no possibility seems in switch, although we can successfully do in router, please find the example

https://support.huawei.com/hedex/hdx.do?docid=EDOC1100069307&id=dc_fd_NAT_0004&text=Introduction%252525252Bto%252525252BNAT&lang=en

S5700-48TP-PWR-SI routing between sub-networks

Best answer

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

S5700-48TP-PWR-SI routing between sub-networks

Best answer

Third Party’s Trade Secret

My Followers