Supposed we received the PE mac address from our access port( Towards Customer interface ) . and we want to disable this mac-address. Kindly Provide the alternative L2 MAC address filtering mechanism for S5300-28P-LI Switches.
Alarm Information ：
when customer configure that command, customer get below prompt message .
Handling Process：Confirm this command on the document , I found some devices have limit to configure .
Root Cause：S5300LI chip don't support mac-address learning disable under traffic behavior view.
Solution：We can use traffic-filter and ACL apply on the interface , if the ACL deny the mac-address , the traffic-filter behavior will be take effect .
END
This post was last edited by Skay at 2018-09-12 01:08.
