Got it

S1720-52GWR-4X CLI

Created: Apr 17, 2020 07:32:40Latest reply: Apr 17, 2020 19:17:16 367 7 0 0 0
  Rewarded HiCoins: 1 (problem resolved)

Hey there,

Our company bought severe new S1720-52GWR-4X, can I configure them by CLI?  I don't even find the console port.

  • x
  • convention:

Featured Answers

Best answer

Recommended answer

Popeye_Wang
Admin Created Apr 17, 2020 08:59:49

Hello,

The S1720-52GWR-4X doesn't have a console port. However, you can use the CLI-based configuration through the Telnet/SSH.

s1720

The function control by license. For your model, the license is activated before delivery.  If your license becomes invalid due to misoperations, you need to restore it. For details, please refer to https://support.huawei.com/hedex/hdx.do?docid=EDOC1100126515&id=EN-US_CONCEPT_0177099685&lang=en

s1720-1


View more
  • x
  • convention:

All Answers
Popeye_Wang
Popeye_Wang Admin Created Apr 17, 2020 07:35:32

Hello,
Kindly wait a second, we are processing on your problem.
View more
  • x
  • convention:

Unicef
Unicef MVE Created Apr 17, 2020 07:39:47

Hi user!

1. Connect the DB9 female connector of the console cable to the serial port (COM) on the PC, and connect the RJ45 connector to the console port on the device

Console

NOTE:
If a maintenance terminal (PC) does not have a DB9 serial port, purchase a USB-to-DB9 cable that has a DB9 male connector with nuts. Connect the DB9 female connector of the console cable to the DB9 male connector of the USB-to-DB9 cable, and then connect the USB connector to the USB port of the maintenance terminal.

2. Start the terminal emulation software on the PC. Create a connection, select the port for connection, and set communication parameters. (This section uses the third-party software SecureCRT as an example.)
A. Click  to establish a connection

Connection

B. Set the port for connection and communication parameters, .
Select the port for connection. For example, you can view port information in Device Manager in the Windows operating system, and select the port for connection.

 NOTE:

By default, no flow control mode is configured on the device. Because RTS/CTS is selected in the software by default, you need to deselect RTS/CTS; otherwise, you cannot enter commands.

Quick connect


3. Click Connect. The following information will be displayed, prompting you to enter the user name and password. (In password authentication, the system prompts you to enter the password. The following output is for reference only.)

Connect

You can run commands to configure the device after login. Enter a question mark (?) whenever you need help.Checking the Configuration
- Run the display users [ all ] command to check user login information on the user interface.
- Run the display user-interface console 0 command to check user interface information.
- Run the display local-user command to check the local user attributes.
- Run the display access-user command to check information about online users.


https://support.huawei.com/enterprise/en/doc/EDOC1000141931/78e0b155/logging-in-to-a-device-through-the-console-port


View more
  • x
  • convention:

wissal
wissal MVE Author Created Apr 17, 2020 07:51:38

Hello,
Please follow the link below to get the desired information
https://support.huawei.com/enterprise/en/switches/s1720-52gwr-pwr-4x-pid-22348235
Thanks
View more
  • x
  • convention:

I%20would%20like%20to%20share%20with%20you%20my%20experience%2C%20I%20am%20a%20telecommunications%20engineer%2C%20currently%20senior%20project%20manager%20at%20a%20telecom%20operator%20who%20is%20a%20partner%20of%20Huawei%2C%20in%20the%20radio%20access%20networks%20department%2C%20during%20my%20career%20I%20have%20managed%20various%20projects%20for%20various%20network%20nodes.%3Cbr%2F%3EAt%20the%20same%20time%2C%20temporarily%20I%20give%20courses%20in%20telecom%20engineering%20schools%2C%20to%20bring%20the%20operational%20side.
user_3751116
user_3751116 Created Apr 17, 2020 08:09:40

Posted by Unicef at 2020-04-17 07:39 Hi user!1. Connect the DB9 female connector of the console cable to the serial port (COM) on the PC, ...
Thanks for the reply. but I'm sure there is not a console port on the model.
View more
  • x
  • convention:

Unicef
Unicef Created Apr 17, 2020 08:34:59 (0) (0)
CLI Login Configuration:

https://support.huawei.com/hedex/hdx.do?docid=EDOC1000177841&id=index&lang=en  
Popeye_Wang
Popeye_Wang Admin Created Apr 17, 2020 08:59:49

Hello,

The S1720-52GWR-4X doesn't have a console port. However, you can use the CLI-based configuration through the Telnet/SSH.

s1720

The function control by license. For your model, the license is activated before delivery.  If your license becomes invalid due to misoperations, you need to restore it. For details, please refer to https://support.huawei.com/hedex/hdx.do?docid=EDOC1100126515&id=EN-US_CONCEPT_0177099685&lang=en

s1720-1


View more
  • x
  • convention:

Legalist
Legalist Created Apr 17, 2020 19:17:16

Nice! thank you
View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.