we have a S12708 V200R008C00SPC500.
Our provider is using a Cisco 3400 ME with an interconnecting port in 802.1ad.
The provider port is configured as follow:
Interface Gi0/1
ethernet dot1ad nni
switchport mode trunk
switchport trunk allow vlan 801
The vlan 801 is the customer VLAN (outer vlan) in wich we would like to pass other vlans.
We can use the VLAN in 802.1q as regular but we cannot make working the 802.1ad QinQ.
we follow the examples for basic QinQ and Selective QinQ without results.
Anyone know how we have to configure our side? The provider is MEF compliant.
Thanks in advance
Denis